03-25-2024, 09:43 AM | #1 |
New Member
7
Rep 17
Posts |
First time buying advice X1, X3. Reliability question.
Looking to buy my first BMW, probably X1 or X3, 2L I4. I know the N20 had the timing chain issue and recall in 2015. Assuming that was taken care of, is the N20 any more or less reliable than the newer B48?
I really like the red 2017 x3, last year with N20. Or maybe a 2016+ X1 with B48. My wife is petrified it will be a reliability nightmare… after years of great reliability out of Toyota/Hondas. |
03-25-2024, 10:05 AM | #2 |
Lieutenant Colonel
841
Rep 1,940
Posts |
Been driving these cars for 15 years, every car purchased used from original owner, been driving 2012 X3 past several years. I would recommend you find a car with 6 cylinder engine; particularly with X3- at 4,200+ lbs. these are heavy cars to move- BMW has an excellent reputation for manufacturing one of the best inline 6 engines throughout its history. Get a complete service/repair history and review, pay an independent Euro car mechanic to perform a pre-purchase inspection before you close a deal, money in the bank on one of these cars. Reliability is generally good if you are diligent about regular service, that's key with these cars.
|
Appreciate
1
rpschultz137.00 |
03-25-2024, 06:02 PM | #4 |
Second Lieutenant
74
Rep 299
Posts |
|
Appreciate
0
|
03-25-2024, 06:33 PM | #5 |
New Member
7
Rep 17
Posts |
|
Appreciate
0
|
03-25-2024, 09:01 PM | #6 |
Lieutenant Colonel
841
Rep 1,940
Posts |
If you can get shop referral from friend, co-worker or the like that’s good. Cost perhaps $100-150…. You want shop capable of reading the cars computer system to scan for fault codes, and preferably mech who knows BMW cars-
|
Appreciate
1
rpschultz137.00 |
03-26-2024, 06:42 AM | #8 |
Lieutenant Colonel
841
Rep 1,940
Posts |
Yes, very good. Find a reputable shop who can inspect the vehicle, test drive, etc. - gaskets on the oil pan, oil filter housing and valve covers are a weakness on BMW cars….you want the car inspected up on a lift.
|
Appreciate
1
rpschultz137.00 |
03-26-2024, 09:09 AM | #9 |
Colonel
977
Rep 2,668
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
Unless it supports BMW manufacturer specific codes, no. A generic code reader is mostly going to detect emission problems, not hidden BMW errors and history.
Sure the I4 propels the 2+tons of vehicle around adequately, but it has to work pretty hard doing it, therefore causing extra straining. The BMW I6 in known for it's buttery smooth effortless power delivery. It's not like the mpg is that much better in the I4 since it has to work so hard. I'd never select the I4 for such a heavy vehicle, it's a better match for the lighter X1. |
Appreciate
2
rpschultz137.00 Wgosma840.50 |
03-26-2024, 10:08 AM | #11 |
New Member
7
Rep 17
Posts |
This thread goes into some detail on OBD readers. eBay has the Foxwell 510 for $125. Carly looks cool but it's subscription based so probably the same cost in 1 year and more after, not sure.
I'm an engineer and DIY'er, so part of the fun of owning a BMW is working on it myself. I can't/won't do everything that may need fixed, but I'll tackle some easy to medium difficulty jobs. |
Appreciate
0
|
03-26-2024, 11:51 AM | #12 |
Lieutenant
816
Rep 751
Posts
Drives: 2009 E93 M3 DCT
Join Date: Dec 2017
Location: BC Canada
|
Not carly, it does not actually register the battery when you tell it to register the battery.
|
Appreciate
1
rpschultz137.00 |
03-26-2024, 12:36 PM | #14 |
Lieutenant Colonel
841
Rep 1,940
Posts |
BTW......If you haven't already browsed the X1 forum suggest you take a look:
https://f48.bimmerpost.com/forums/sh...ht=reliability |
Appreciate
1
rpschultz137.00 |
03-26-2024, 04:53 PM | #15 |
Colonel
977
Rep 2,668
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
If you're an engineer, what you want is ISTA+, e-sys with a $15 cable and windows laptop.
|
Appreciate
1
rpschultz137.00 |
03-26-2024, 05:01 PM | #16 |
New Member
7
Rep 17
Posts |
Wow. That looks both powerful and complicated. Thanks for the tip, I’ll have to research that.
|
Appreciate
1
Marinesujul1.50 |
03-26-2024, 05:31 PM | #17 |
Colonel
977
Rep 2,668
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
|
Appreciate
1
rpschultz137.00 |
03-28-2024, 09:01 AM | #18 |
New Member
7
Rep 17
Posts |
Most/many of the young BMW YouTubers use Carly?!? I get the attraction of an app, but if I wanted an app I’d probably use BimmerCode. Foxwell or Launch x431 for convienence. ISTA seems most capable.
|
Appreciate
1
Marinesujul1.50 |
03-28-2024, 11:59 AM | #19 | |
Colonel
977
Rep 2,668
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
Quote:
Funny you say YouTubers use Carly, makes sense since even a 2 year old can press icons in an app |
|
Appreciate
3
|
03-28-2024, 03:10 PM | #20 |
Registered
2
Rep 3
Posts |
You get most of your BMW if you use their dedicated apps. You may not be able to diagnose or read all faults when using other interfaces or apps. But it really depends on what you want to achieve with the tools.
|
Appreciate
1
rpschultz137.00 |
Post Reply |
Bookmarks |
|
|