[April1]

Little bit confused, see the following instructions:

02) Copy "EDIABAS" folder from "\\E-sys 3.18.4\E-sys 3.18.4\EDIABAS" to "C:\EDIABAS"
03) Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET (it’s possible it has a different value, in that case just change it)
04) Copy "est" folder from "\\E-sys 3.18.4\est" to "C:\ESysData\e-sys est"
05) Copy all "psdzdata" subfolders (all 7 Folders) from "\\2_46.3 psdzdata\" to "C:\ESysData\psdzdata\"
06) Copy the contents of the "C:\ESysData\psdzdata\swe" folder into the "C:\ESysData\SWE" folder.
07) Make sure that there is a "Dist" folder in each of the Chassis (F01/F10/F25) folders etc. (e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_5 11\odx\dist") (should already be set, but check anyway - if not there - create empty "Dist" folders)


what you said was the step 6. Do I need to follow step 4? Is the syntax of the folder names correct there?

[gareth3685]

Originally Posted by April1

Little bit confused, see the following instructions:

02) Copy "EDIABAS" folder from "\\E-sys 3.18.4\E-sys 3.18.4\EDIABAS" to "C:\EDIABAS"
03) Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET (it’s possible it has a different value, in that case just change it)
04) Copy "est" folder from "\\E-sys 3.18.4\est" to "C:\ESysData\e-sys est"
05) Copy all "psdzdata" subfolders (all 7 Folders) from "\\2_46.3 psdzdata\" to "C:\ESysData\psdzdata\"
06) Copy the contents of the "C:\ESysData\psdzdata\swe" folder into the "C:\ESysData\SWE" folder.
07) Make sure that there is a "Dist" folder in each of the Chassis (F01/F10/F25) folders etc. (e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_5 11\odx\dist") (should already be set, but check anyway - if not there - create empty "Dist" folders)


what you said was the step 6. Do I need to follow step 4? Is the syntax of the folder names correct there?

Your instructions look better than the ones I had, however I don't recall doing step 4 and I don't have the folder there. I think thats the token location - you can set the correct path for it in the program anyway.

EDIT: yes just checked, no harm putting the EST there, you go into settings and set the location anyway (mine is in a completely different folder as I didn't move it from where I downloaded it).

[April1]

Originally Posted by gareth3685

Your instructions look better than the ones I had, however I don't recall doing step 4 and I don't have the folder there. I think thats the token location - you can set the correct path for it in the program anyway.

EDIT: yes just checked, no harm putting the EST there, you go into settings and set the location anyway (mine is in a completely different folder as I didn't move it from where I downloaded it).

Thanks. Appreciate. I want to make sure that I don't mess up my settings.

[April1]

I am able to connect to my X3 and see data through esys. Cable is working perfectly. I will now study the procedure in details before going into experimentation.

The most critical element so far was getting the cable . Being an electronics engineer, making right cable was not a problem for me but its not every ones cup of tea. Tiny wires with good connection and no chance of making a short any where needs skill. I think I can support others if they want to have the reliable cables.

[KingX]

Got my cable done and downloading patiently the huge files. Thanks StepfordBMW for the initial help. I'm reading all the various manuals those guys from the F10 forum made

A lot of people are calling this coding but it's not really. It's just a more complicated form of an option menu. More people will probably get on this as time goes by.

[April1]

I could code many features very easily on my X3 2011 F25.

Thanks to all those who helped us getting the software and the documentation.

[mge92]

Anyone in the DC area willing to code my bmw x3 for some compensation?