Coding made Easy: A step by step procedure

zhoudaniell · 02-05-2018, 05:50 PM

Quote:

Originally Posted by shawnsheridan

PM sent. Cheat Codes are built into E-Sys Launcher.

Thanks! is there a way to "save" all of my codes in case it gets reset again?

shawnsheridan · 02-05-2018, 05:54 PM

Quote:

Originally Posted by zhoudaniell

Thanks! is there a way to "save" all of my codes in case it gets reset again?

If dealer programs you car, ECU will get a new CAFD, and restoring backed up coding data from old CAFD "A" into new CAFD "B" is not wise. They may not be aligned.

Why bother anyway, when you can recode car in 10 minutes.

Almaretto · 02-06-2018, 02:01 AM

Quote:

Originally Posted by shawnsheridan

If dealer programs you car, ECU will get a new CAFD, and restoring backed up coding data from old CAFD "A" into new CAFD "B" is not wise. They may not be aligned.

Why bother anyway, when you can recode car in 10 minutes.

E-sys will let you load NCD from different ECU or firmware level, but not write to car.

moonluv810 · 02-25-2018, 07:59 AM

Sub!

Almaretto · 02-25-2018, 10:26 PM

Quote:

Originally Posted by moonluv810

Sub!

Or you could use thread tools.

antixian · 03-06-2018, 11:20 PM

hi does VIM work yet in NBT Evo 6 using this method of coding? if so please PM me the details. i've got all the other stuff i wanted coded using carly but VIM is not working for me even though it says it was turned on and i get no errors. it just wont work when i go over 4mph. btw i'm wanting to do this on a F25 - 2017 x3 35i.

Almaretto · 03-06-2018, 11:39 PM

Quote:

Originally Posted by antixian

hi does VIM work yet in NBT Evo 6 using this method of coding? if so please PM me the details. i've got all the other stuff i wanted coded using carly but VIM is not working for me even though it says it was turned on and i get no errors. it just wont work when i go over 4mph. btw i'm wanting to do this on a F25 - 2017 x3 35i.

Can be done with Bimmercode.

zhoudaniell · 03-19-2018, 06:47 PM

what's the most up to date cheat sheet out there?

Almaretto · 03-19-2018, 07:55 PM

Quote:

Originally Posted by zhoudaniell

what's the most up to date cheat sheet out there?

Launcher Cheat Codes on github.

zhoudaniell · 03-19-2018, 08:47 PM

Quote:

Originally Posted by Almaretto

Launcher Cheat Codes on github.

I see the Almaretto.xml - not familiar with github, how do I download into a readable format?

Almaretto · 03-20-2018, 12:51 AM

Quote:

Originally Posted by zhoudaniell

I see the Almaretto.xml - not familiar with github, how do I download into a readable format?

Pro Launcher will sync. Premium, you must download.

Manual Method:

Go Here.
Individually select Author.xml (eg, Almaretto.xml)
Open corresponding authors *.xml's [C:\Program Files (x86)\TokenMaster\E-Sys Launcher Premium\FDLCodes] in text editor (eg, Notepad++) & paste (replacing existing text) & save.
Right click *.xml & open with IE to verify you copied correctly (it will display similar to text editor if right)

How to make you own Cheat Codes.

zhoudaniell · 03-20-2018, 09:08 AM

Quote:

Originally Posted by Almaretto

Pro Launcher will sync. Premium, you must download.

Manual Method:

Go Here.
Individually select Author.xml (eg, Almaretto.xml)
Open corresponding authors *.xml's [C:\Program Files (x86)\TokenMaster\E-Sys Launcher Premium\FDLCodes] in text editor (eg, Notepad++) & paste (replacing existing text) & save.
Right click *.xml & open with IE to verify you copied correctly (it will display similar to text editor if right)

How to make you own Cheat Codes.

Got it, I do actually have the premium version. Do I just download to my desktop and it'll automatically sync? Or do I need to open it specifically from the app?

Almaretto · 03-20-2018, 11:40 PM

Quote:

Originally Posted by zhoudaniell

Got it, I do actually have the premium version. Do I just download to my desktop and it'll automatically sync? Or do I need to open it specifically from the app?

No you follow instructions outlined to replace existing files in Launcher directory.

zhoudaniell · 03-28-2018, 12:22 PM

Quote:

Originally Posted by Almaretto

No you follow instructions outlined to replace existing files in Launcher directory.

Tried to code the trunk open and close via fob, but when I entered the module it gave me an error and I couldn't get into it. Any ideas?

Almaretto · 03-28-2018, 09:51 PM

Quote:

Originally Posted by zhoudaniell

Tried to code the trunk open and close via fob, but when I entered the module it gave me an error and I couldn't get into it. Any ideas?

Elaborate on the error and I will help solve.

Rabiee · 04-03-2018, 12:45 PM

Dear friends
i'm new user for esys but i can't understand coding concept
now i have car F10 -- replacement cluster and input new dash but many functions in odometer not working i need coding via esys

please give me way step by step

shawnsheridan · 04-03-2018, 01:57 PM

Quote:

Originally Posted by Rabiee

Dear friends
i'm new user for esys but i can't understand coding concept
now i have car F10 -- replacement cluster and input new dash but many functions in odometer not working i need coding via esys

please give me way step by step

PM sent. Replacing Kombi is a bit more than basic coding though, especially if it is not same Kombi as original Kombi, and if replacement Kombi is Used and not new. Good luck with it.

darius88 · 04-07-2018, 01:06 AM

hi, I changed CIC from 6” to 8” but now lot of things not working.. navigation, parking asist, radio.... How to program correctly with esys

darius88 · 04-09-2018, 02:28 PM

Hi, where could be problem, my navigation on screen inactive after retrofit, and radio no sound.

voipwizard · 05-06-2018, 07:47 AM

Morning guys.

Last week I dropped the Beemer Laptop and destroyed the hard drive. I had in there a working copy of e-sys (i believe) and Ista+. I was able to read faults and clear them, and i ventured into coding my X3. So far so good.

Well here I am trying to rebuild the laptop , this time with an SSD drive that I can toss around

ISTA+ is able to communicate with the car via my ENET cable. Can read the faults but when is time to clear them the following error displays:
Name: ista programming error.PNG
Views: 4262
Size: 6.9 KB

Name: ista programming error.PNG
Views: 4262
Size: 6.9 KB

Do you guys know what is missing? I do not have E-Sys on this laptop, and I just finished downloading the PSDZdata_full file (over 100GB)

Thanks so much for your help!

Almaretto · 05-06-2018, 04:47 PM

Quote:

Originally Posted by voipwizard

Morning guys.

Last week I dropped the Beemer Laptop and destroyed the hard drive. I had in there a working copy of e-sys (i believe) and Ista+. I was able to read faults and clear them, and i ventured into coding my X3. So far so good.

Well here I am trying to rebuild the laptop , this time with an SSD drive that I can toss around

ISTA+ is able to communicate with the car via my ENET cable. Can read the faults but when is time to clear them the following error displays:
Attachment 1819288

Do you guys know what is missing? I do not have E-Sys on this laptop, and I just finished downloading the PSDZdata_full file (over 100GB)

Thanks so much for your help!

You need to disable programming in ISTA+. Set programming and expert mode to false in registry. Then, you will not get that error.

voipwizard · 05-06-2018, 09:26 PM

Hey Almaretto thanks for the tip!.
A quick google search produced the registry values that you suggested. Found them and changed the value.
Too late for testing today, tomorrow will check it out
Thanks!

02-25-2018, 07:59 AM	#2358
moonluv810 Captain 2776 Rep 648 Posts Drives: 2017 BMW X3, 2018 BMW M3, 2022 Join Date: Sep 2017 Location: Erie, CO iTrader: (0)	Sub!
	Appreciate 0 Quote

03-06-2018, 11:20 PM	#2360
antixian Enlisted Member 8 Rep 41 Posts Drives: car Join Date: Jul 2007 Location: streets of compton iTrader: (0) Garage List 2003 Nissan 350z [0.00] 2006 BMW 330i [0.00] 2017 BMW X3 xDrive 35i [0.00]	hi does VIM work yet in NBT Evo 6 using this method of coding? if so please PM me the details. i've got all the other stuff i wanted coded using carly but VIM is not working for me even though it says it was turned on and i get no errors. it just wont work when i go over 4mph. btw i'm wanting to do this on a F25 - 2017 x3 35i. Last edited by antixian; 03-06-2018 at 11:33 PM..
	Appreciate 0 Quote

03-19-2018, 06:47 PM	#2362
zhoudaniell Private 13 Rep 89 Posts Drives: 2014 x3 Join Date: Mar 2017 Location: Wisconsin iTrader: (0)	what's the most up to date cheat sheet out there?
	Appreciate 0 Quote

04-03-2018, 12:45 PM	#2370
Rabiee Registered 0 Rep 1 Posts Drives: BMW Join Date: Jun 2017 Location: Egypt iTrader: (0)	F10 ---525 i --replacement instrument cluster Dear friends i'm new user for esys but i can't understand coding concept now i have car F10 -- replacement cluster and input new dash but many functions in odometer not working i need coding via esys please give me way step by step
	Appreciate 0 Quote

04-07-2018, 01:06 AM	#2372
darius88 New Member 0 Rep 17 Posts Drives: f30 Join Date: Oct 2017 Location: Lithuania iTrader: (0)	hi, I changed CIC from 6” to 8” but now lot of things not working.. navigation, parking asist, radio.... How to program correctly with esys
	Appreciate 0 Quote

04-09-2018, 02:28 PM	#2373
darius88 New Member 0 Rep 17 Posts Drives: f30 Join Date: Oct 2017 Location: Lithuania iTrader: (0)	Hi, where could be problem, my navigation on screen inactive after retrofit, and radio no sound.
	Appreciate 0 Quote

05-06-2018, 07:47 AM	#2374
voipwizard New Member 2 Rep 17 Posts Drives: 2012 BMW X3 Join Date: Aug 2015 Location: Atlanta, GA iTrader: (0)	ENET Cable - ISTA+ error programming Morning guys. Last week I dropped the Beemer Laptop and destroyed the hard drive. I had in there a working copy of e-sys (i believe) and Ista+. I was able to read faults and clear them, and i ventured into coding my X3. So far so good. Well here I am trying to rebuild the laptop , this time with an SSD drive that I can toss around ISTA+ is able to communicate with the car via my ENET cable. Can read the faults but when is time to clear them the following error displays: Do you guys know what is missing? I do not have E-Sys on this laptop, and I just finished downloading the PSDZdata_full file (over 100GB) Thanks so much for your help!
	Appreciate 0 Quote

05-06-2018, 09:26 PM	#2376
voipwizard New Member 2 Rep 17 Posts Drives: 2012 BMW X3 Join Date: Aug 2015 Location: Atlanta, GA iTrader: (0)	Hey Almaretto thanks for the tip!. A quick google search produced the registry values that you suggested. Found them and changed the value. Too late for testing today, tomorrow will check it out Thanks!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search