11-07-2011, 08:08 PM | #1 |
Registered
0
Rep 3
Posts |
Cover Strip
Anyone know how to remove an "entrance cover strip"? It's marked #1 on the following schematic:
http://www.realoem.com/bmw/showparts.do?model=PC91&mospid=49509&btnr=51_5177& hg=51&fg=55&hl=7 Looks like it's held down by a series of sill clips and can be pried up. Just curious if anyone has the installation instructions or has removed one before. Thanks! |
11-09-2011, 01:27 PM | #2 |
Enlisted Member
2
Rep 37
Posts |
A screwdriver taped up so that it won't scratch should work. Pry gently up from the ends and have a second screwdriver to give some additional support from the sides. These clips can get quite brittle so it may pay to get a few spares in before doing the work.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|