[sd306]

So, I sold my BM3 license and now can't log my MP tune with my phone. Any recommendations for a logging only app? I saw MHD has a logging only license:
https://mhdtuning.com/products/b58-monitor-license-1

Looks like I could use my existing ENET cable and lightning adapter for my iphone based on this:
https://mhdtuning.com/products/mhd-f...icense-for-s58

[sd306]

I reached out to BM3 to see if I could continue to use their app and wifi agent, but you can only log with a BM3 license. So if they add any of these features mentioned in their website header for the S58, I may have to come back and do a combo of MP and BM3

MAP SWITCHING, FLEX FUEL, ROLLING ANTILAG, NEW MAP EDITOR - COMING SOON!

Looks like MHD monitor license is the best option.

[sd306]

I'll just keep self replying

I bought MHD Monitor license. I can connect to carplay over wifi still and connect MHD to monitor the Mission Performance tune. Worth the ~$123 for the MHD license thus far. Below are some screenshots of MHD. Clearing codes with MHD are about 100X better than the BM3 wifi agent. It tell you what it's doing and responds quickly (it's also wired, so maybe that plays a part). You can upload the logs fairly easily to datazap too for viewing on a full blown computer.

2nd and 3rd gear log - just flooring it:
https://datazap.me/u/sd306/log-16106...6-37-38&solo=5

Going to add a charger to the OBD port (that already has a power switch from my old BM3 wifi agent) so all I do is plug in my iPhone via on lightning cable, then i have mobile logging, carplay (via wifi), and charging still


This is on it's way in the mail:
https://www.amazon.com/gp/product/B07DPLLLNT/

[sd306]

GT500R Figured you'd be interested in this if you sell BM3 license.

[sd306]

Got everything installed and very clean

CarPlay still works over wifi, and use MHD to log and phone charges all at the same time

Ended up running power from my 12v to 5v adapter that charges my dragy and runs my radar. It has a max output of 3A so 1A per device should suffice. I ran the usb lightning power cable behind the dash from the passenger side.

I hid the ethernet device behind the panel by removing the screw and pushing it downward.

Used a flat OBD cable to hide it well.

[sd306]

FYI, I repurchased BM3 for logging as MHD doesn't log timing corrections accurately without MHD actually installed. Also, doesn't show knock like BM3 does.