05-22-2023, 08:34 PM | #1 |
New Member
0
Rep 29
Posts |
X3-2013 F25 -i28 x drive -Drive moderately error
X3-2013 F25 -i28 x drive Drive Train malfunction error When driving on steep mountains at a speed of 90 km/h in cruise mode, I encountered a "Drive Train malfunction" error on two occasions. Strangely, the error does not occur when driving below 80 km/h. However, once I stop the vehicle, the error code clears automatically, and the vehicle status indicates that everything is okay. why this error ? I checked battery status in bimmerlink app... battery life is zero seems its time to change the battery... i got few undervoltage error codes.. 10 Central gateway module 3 errors CD043F: NAK receiver node: did not pick up the message; buffer full 801C15: Failed to fall asleep at 30B 801C20: Central fault memory full 29 Dynamic stability control MK60 E5 1 error 4809AB: Global power supply - external undervoltage 36 Japan basis interface telephone 1 error B7F180: Software reset 56 Roof function centre 2 errors 801A4C: SINE: Internal supply undervoltage 801A4A: Deactivation of IRS and inclination sensor via customer function 63 Headunit/radio 2 errors E1C43F: Receiver node: did not pick up message; Buffer full E1C447: MOST node: all function blocks logged of 72 Driver's side footwell module 3 errors 800F7A: Rear running light left defective 800F7B: Reversing light on the right is defective 800F92: Welcome Light repeat lock active how to clear all the codes ? Thanks |
Post Reply |
Bookmarks |
|
|