[GFarra31]

Hi All,

I am doing a 20" square setup using tire size 255/45/20, which I beleive will work on a 9" wide wheel.

My wheel choice is Verde V99 Axis which is 20x9, offset +32

Using www.willitfit.com, this set up appears to fit when I use the above as compared to the stock 19" set up of 19x7.5 ET32 on 245/50/19 tires.

I personally would like an offset around +25, to get the tires out closer to the fenders.

Lastly.....does anyone have any experience with Verde Wheels?

Thank you, George

[Rottweiler]

My BC Forged 9” front wheels w/ 255/40 have a 20 offset and are just about flush. They could actually be out another 1/4” to be 💯💯💯

255 in the rear is gonna be skinny af imho but I’m guessing that the ability to rotate is important to you

You can find several posts with guys running 275 square. Maybe that’s an option for you, but you’d be better off w/ 9.5” wheels if so

275 WILL fit a 9” wheel but that’s the absolute minimum width for that tire

[GFarra31]

Rottweiler ,

Thank you for the input. I also found a set of TSW Neptune wheels which are 20x8.5, offset +20 that may work better.

Yep, I wanted a square set up so I can rotate tires. Will be mounting either Conti or Michelin high performance all seasons.

Regards, George

[Rottweiler]

Understood George

I’m in the camp of guys who prefer fat ass tires in the back (295/305/315) so pretty much have to run staggered

If the 255’s back there won’t bother you then you’ll be golden. Saving weight and money as well…