[G80BSM]

Vettethret those wheels look absolutely stunning.

[Vettethret]

Originally Posted by S.111

Vettethret those wheels look absolutely stunning.

Thank you . They werent my first choice, but since this is the wifes car, I didnt want her curbing 6k wheels. It settled quite a bit on the 60 mile drive home. I will do a write up and post some pics tommorrow. Big thanks to Ben, he's the man.

[r33_RGSport]

Originally Posted by Vettethret

Thank you . They werent my first choice, but since this is the wifes car, I didnt want her curbing 6k wheels. It settled quite a bit on the 60 mile drive home. I will do a write up and post some pics tommorrow. Big thanks to Ben, he's the man.

Glad to finally able to meet and work on the X4MC.

[G80BSM]

Originally Posted by Vettethret

Thank you . They werent my first choice, but since this is the wifes car, I didnt want her curbing 6k wheels. It settled quite a bit on the 60 mile drive home. I will do a write up and post some pics tommorrow. Big thanks to Ben, he's the man.

Looking forward to it. I still haven't decided between a GLC63s and X3MC. LOL.

I think silver wheels on a Black car look amazing. I've run Satin Black/ Black with machined lip wheels on Black cars for the past 5/6 years. I think I'm over them now. The pictures of your car put the final nail in the coffin. I need to get all my wheels refinished now. I'm thinking about repainting my M2 and S63 wheels in Satin Mercury Silver now.

[MJDBMW]

What should the mss spring install cost?

[FrankieNuo]

Originally Posted by r33_RGSport

I think I lowered it too much. Haha.

Looks like you have some room to spare. Go lower!

[AlexFL]

Originally Posted by FrankieNuo

Looks like you have some room to spare. Go lower!

I told Ben to do this. He doesn’t listen.

[pluckydks]

Originally Posted by AlexFL

I told Ben to do this. He doesn’t listen.

[r33_RGSport]

Originally Posted by AlexFL

I told Ben to do this. He doesn’t listen.

I'll pull my spring out and cut the bump stop in half.
And put pillow on my seats. Haha.

[Vettethret]

Originally Posted by r33_RGSport

I'll pull my spring out and cut the bump stop in half.
And put pillow on my seats. Haha.

Why didnt you give me that option? Do you even lift Bro?

[pluckydks]

Originally Posted by r33_RGSport

I'll pull my spring out and cut the bump stop in half.
And put pillow on my seats. Haha.

A donut cushion like for those people with hemorrhoids

[r33_RGSport]

Originally Posted by Vettethret

Why didnt you give me that option? Do you even lift Bro?

Hahaha.

Cuz you didn't say "I live with the ride quality, I just want it rub as hard as it can".

That was the motto back in the 90's.
If it doesn't rub, then it is not low enough.
U-Turn gotta be 50 point turn, lol.

[Vettethret]

Originally Posted by r33_RGSport

Hahaha.

Cuz you didn't say "I live with the ride quality, I just want it rub as hard as it can".

That was the motto back in the 90's.
If it doesn't rub, then it is not low enough.
U-Turn gotta be 50 point turn, lol.

I remember those days VERY well. I've vaporized more rear wheel inner fender liners than I can count! I had an 04 ZO6 slammed so low, that I got high centered pulling into the Chevron on the corner of PCH in Laguna beach, on a Saturday night no less. 3 guys walking by had to push the car forward to get me unstuck!

Polk high- 4 touchdowns in a single game!!!!!

[Will Pwr]

Originally Posted by r33_RGSport

I'll pull my spring out and cut the bump stop in half.
And put pillow on my seats. Haha.

dont forget to set your tokico illuminas to full stiff too...or was it the Koni Yellows? haha

[pluckydks]

Originally Posted by Will Pwr

dont forget to set your tokico illuminas to full stiff too...or was it the Koni Yellows? haha

JDM 4 LyFe 😂😂😂

[BOEING 777]

Originally Posted by MJDBMW

What should the mss spring install cost?

MJD I will be doing mine tomorrow at Eurowerks and it is around 4 hours labor cost.

[MJDBMW]

Originally Posted by BOEING 777

MJD I will be doing mine tomorrow at Eurowerks and it is around 4 hours labor cost.

Good to know- when ready, that's where I'm going to get it done. Are you running on OEM tires/wheels?

[BOEING 777]

Originally Posted by MJDBMW

Good to know- when ready, that's where I'm going to get it done. Are you running on OEM tires/wheels?

Yes I am running original OEM set up however I am putting 12MM spacer all around.I will be going 265 F and 295 R when these tires are gone.Need to get my moneys worth out of them.LOL.John and his team at Eurowerks are the best,do all my work there.

[_x3M_Competition]

Has anyone needed to adjust their headlight level after lowering? I haven't driven my car at night yet to see if my headlights are aimed to low after I lowered my car.

[dhurng]

Originally Posted by cerebrallp02

Has anyone needed to adjust their headlight level after lowering? I haven't driven my car at night yet to see if my headlights are aimed to low after I lowered my car.

very curious about this, isn't the headlight direction relative? Or is there some sort of underlying technology that has it pointed in an absolute height?

[Influence]

Originally Posted by cerebrallp02

Has anyone needed to adjust their headlight level after lowering? I haven't driven my car at night yet to see if my headlights are aimed to low after I lowered my car.

I would think that as long as you lower the front and rear equally (i.e. by 1" at each end), which would retain the 15mm factory rake, you shouldn't have to re-align your headlights. Then again, since you will be lower to the ground to start, you might lose a touch of range on your lights. Aiming them upwards a touch may counter the distance loss, but then you might start glaring other drivers.

[MJDBMW]

Originally Posted by BOEING 777

Yes I am running original OEM set up however I am putting 12MM spacer all around.I will be going 265 F and 295 R when these tires are gone.Need to get my moneys worth out of them.LOL.John and his team at Eurowerks are the best,do all my work there.

How'd the install go?