[deladude]

Originally Posted by TheusBimmer

I have purchased the Tuxmat as well. They sure look nice! Thanks for the pics everyone!

@deladude: how do you clean them and keep them new!?!?

I don't. I bought them to get dirty so the car doesn't

I did power wash them mid-summer and here's what the driverside looked like at the time:




They clean right up with the right amount of water pressure! I forgot to take after pics, sorry.

Still very happy with them

[VMMVMMM]

Originally Posted by lo_cheng

I use my OEM mat for 1 month, then switched to 3D MAXpider, now using for 4 months.
LOVE the 3D MAXpider, much much better then OEM.
I am VERY disappointed on OEM Cargo liner as well and thinking switch to 3D MAXpider as well.

Waste $$ on OEM set.

BTW, I was looking at Infiniti with my wife last weekend, and seem like their OEM mat and Cargo liner are all 3D MAXpider. Much much better then BMW OEM Crap.

I second the 3D MAXpider option. I've had Weathertech mats in my cars for years and just went to these with my X3. They are sooooo much better than Weathertech. Fit, quality of materials, security of installation, all so much better.

[Bimmer100_]

3d max has 2 available options for the cargo on a 19 m40i. Do both fit? Is it just a matter of preference?

[Lenny_RDM]

Got same all season frim bmw looks nice and perfect fits but I think in Chicago i need weather tech;/ on last winter that was nightmare

[rem40i]

Originally Posted by bwsteg

3d max has 2 available options for the cargo on a 19 m40i. Do both fit? Is it just a matter of preference?

I think the options are for spare & non spare.

[lo_cheng]

Originally Posted by bwsteg

3d max has 2 available options for the cargo on a 19 m40i. Do both fit? Is it just a matter of preference?

Oh, didn't know that, I only saw one.
Can you share? i don't want to get wrong one

[wingzee]

Originally Posted by lo_cheng

Oh, didn't know that, I only saw one.
Can you share? i don't want to get wrong one

One is with the cargo tie down rails and one is without.

3D MAXpider M1BM0931309 Black BMW X3 2018 Kagu Liner Cross Fold (with Cargo Tie Down Rails) https://www.amazon.com/dp/B07FFL19YT/ref=cm_sw_r_cp_api_i_2yYDDbMGXE4DS

3D MAXpider M1BM0921309 Black Cargo Liner (BMW X3 2018 KAGU CROSS FOLD (W/O CARGO TIE DOWN RAILS) https://www.amazon.com/dp/B07D9GS13X/ref=cm_sw_r_cp_api_i_oyYDDbTKDYTSJ

[Bimmer100_]

It looks like both would fit. The version without rails has more coverage.

[Rob390]

Here is the 3D MAXpider w/cargo rails. I did not need the full coverage provided by the CB as I only occasionally haul a few plants so this one fit the bill. I really like how you can still access the storage below without removing the mat. I just got this so it needs to "relax? a bit from the shipping.

[IMG][/IMG]

[VMMVMMM]

Here is the one with full coverage. I got this because I've had milk spill in my boot before and I don't want that spilling into the rails.

[lo_cheng]

Just ordered 3D MAXpider cargo mat to replace OEM one.
The OEM one is so garbage, extremely disappointed.

[BimmItUp]

Originally Posted by lo_cheng

Just ordered 3D MAXpider cargo mat to replace OEM one.
The OEM one is so garbage, extremely disappointed.

What's the story on the OEM trunk mat?

[zeich83]

Originally Posted by VMMVMMM

Here is the one with full coverage. I got this because I've had milk spill in my boot before and I don't want that spilling into the rails.

Can those sides still flip up? It looks like they should? is it easy to access the rails?

[lo_cheng]

Originally Posted by BimmItUp

What's the story on the OEM trunk mat?

Here are the issue of the OEM mat
1). The size is not a perfect fit. It is so poorly fitted it give you a feeling it is an after market
2). It slide around
3). The edge of it ever stay flat. The 2inches or so EDGE on 3 side always stays up. I think I take a picture later to show the issue.

My wife have a infiniti, and before that have a MDX, both OEM mat are perfect fit, never move
I was in Infiniti dealer last weekend with my wife to look at the new QX, their OEM floormat and cargo mat now seem like is from 3D MAXpider , exact same look , just with infinit logo.

I already replaced my BMW OEM all season floor mat (Only used it for 1 week and can't stand it), and use the OEM gargo mat for 4 months now and decided to replace it.

[VMMVMMM]

Originally Posted by zeich83

Can those sides still flip up? It looks like they should? is it easy to access the rails?

You can flip the sides up, but it’s not very clean or easy, really. If you needed to use them you could, but if you use them regularly, I would get the one that does not cover them. I will most likely very rarely, if ever, use the rails, so I went this route.

Nice thing is if I ever decide I do need to access them regularly, I could trim them down, since they are identical in design otherwise.

[Rob390]

For those that have the 3D MAXpider mats for the front, do both mats lay completely flat? My driver side mat does not appear to form perfectly around the foot rest so it sticks up a bit at that spot and not sure if this is normal.

[VMMVMMM]

Originally Posted by Rob390

For those that have the 3D MAXpider mats for the front, do both mats lay completely flat? My driver side mat does not appear to form perfectly around the foot rest so it sticks up a bit at that spot and not sure if this is normal.

Check to see that you have it aligned correctly. Mine fits perfectly, way better than any Weathertech mat has, but I noticed when putting them in that they stick so tightly to the carpet that a little adjustment takes pulling the entire thing away from the carpet and setting it back down. Once it's in the right spot, though, it doesn't move.

[Rob390]

Thanks VMMVMMM. Problem is that they sent me the wrong mats. They sent the mats for a 2011-2017 X3. Passenger side was fine but the driver side was not right.

[VMMVMMM]

Originally Posted by Rob390

Thanks VMMVMMM. Problem is that they sent me the wrong mats. They sent the mats for a 2011-2017 X3. Passenger side was fine but the driver side was not right.

Doh!! Well, there's the issue, then. Shoot.

[lo_cheng]

Here is picture of how bad the OEM gargo mat fit

[lo_cheng]

Originally Posted by VMMVMMM

Here is the one with full coverage. I got this because I've had milk spill in my boot before and I don't want that spilling into the rails.

Look really nice, because of your picture, I ordered one to replace my OEM mat that fit poorly and keep sliding around.

Very disappointed on BMW OEM Product this time around

[VMMVMMM]

Originally Posted by lo_cheng

Look really nice, because of your picture, I ordered one to replace my OEM mat that fit poorly and keep sliding around.

Very disappointed on BMW OEM Product this time around

I think you'll be happy with it.