[davidchenliu]

Hi guys, is there a dedicated section for esys coding for the g01 x3? I know bimmercode has made coding easier, but i just perfer to use esys. Is there a section or github where I can see all confirmed coding parameters?

thank you

[lair12]

If you have a new 2020 X3 with ID7 and LiveCockpit Pro, you will find a lot CANNOT be done. I've not found anything that cannot be done with BimmerCode app by using E-Sys. There is a lot I have done in the past, but the ECU's seem not to be very changeable. The HU-MGU headunit is really a closed book from what I can tell so far.

[davidchenliu]

Originally Posted by lair12

If you have a new 2020 X3 with ID7 and LiveCockpit Pro, you will find a lot CANNOT be done. I've not found anything that cannot be done with BimmerCode app by using E-Sys. There is a lot I have done in the past, but the ECU's seem not to be very changeable. The HU-MGU headunit is really a closed book from what I can tell so far.

I really just want to increase blinker to 5 times and have the easy access function. I was able to code the blinker to 5 times on a 2020 G20 with BimmerCode, but no luck on my 2020 G01. My previous 2017 f32 also had the easy entry function that I coded, I want to have that on my g01 as well.

[IslandDriver]

Originally Posted by davidchenliu

I really just want to increase blinker to 5 times and have the easy access function. I was able to code the blinker to 5 times on a 2020 G20 with BimmerCode, but no luck on my 2020 G01. My previous 2017 f32 also had the easy entry function that I coded, I want to have that on my g01 as well.

On the 2020 G01 you can enable the 5 blinks option in the iDrive menu by coding it... but then it still doesn't work. Haven't read about anyone that's gotten it working.

[davidchenliu]

Originally Posted by IslandDriver

On the 2020 G01 you can enable the 5 blinks option in the iDrive menu by coding it... but then it still doesn't work. Haven't read about anyone that's gotten it working.

Sigh.... and I thought esys might fix this...

[tangonauta99]

Originally Posted by davidchenliu

I really just want to increase blinker to 5 times and have the easy access function. I was able to code the blinker to 5 times on a 2020 G20 with BimmerCode, but no luck on my 2020 G01. My previous 2017 f32 also had the easy entry function that I coded, I want to have that on my g01 as well.

I'm on the same boat. I got the 5 blink option coded in idrive-7, however the selction revers back to 3. I talked to Bimmercode support and they confirmed it can't be done. no reason why.

[6ixSpd]

It has to be there, we just need to figure out where the associated setting is inside the BDC module. I will keep digging.