[Gimmethecash]

The stepped lip also makes them look a little smaller. Doesn't bother me, they look plenty big in person and I like 'em. Plus they're lighter than stock (as are the PS4S tires, besides being quieter, smoother, cheaper, and grippier than the RFT's).

[CHATMAN]

gixxerboy63 Will you and family stick around for Florence, or head inland?

[gixxerboy63]

Originally Posted by CHATMAN

gixxerboy63 Will you and family stick around for Florence, or head inland?

We're about 3 hours inland, but I live on a lake... everyone is concerned about flooding all the way to Asheville, which is 3 hours west of us. We are about 12 ft above the full pond and (hopefully) out of the flood plane.... the bigger concern is wind. All generators, flashlights have been sold out and all the gas stations have limited fuel... Fortunately, Both our daily vehicles are topped off and ready if we need to get to higher ground..

[cto]

Anyone know if 19x9.5 offset 25 would fit?
I am starting to into a set of winter wheels for M40i.

[CHATMAN]

Originally Posted by gixxerboy63

We're about 3 hours inland, but I live on a lake... everyone is concerned about flooding all the way to Asheville, which is 3 hours west of us. We are about 12 ft above the full pond and (hopefully) out of the flood plane.... the bigger concern is wind. All generators, flashlights have been sold out and all the gas stations have limited fuel... Fortunately, Both our daily vehicles are topped off and ready if we need to get to higher ground..

Update?

[gixxerboy63]

Originally Posted by CHATMAN

Update?

There have been a few downed trees, power lines near and a few roads have ben closed due to flash flooding, but nothing major near us. We were a little worried about high winds and the possibility of a tornado, but that expired around midnight last night. Our lake is up, but not by a significant amount. There is some lingering concerns about excess water upstream.

It is beautiful outside today.

I think we're going to be fine.

[gixxerboy63]

Originally Posted by cto

Anyone know if 19x9.5 offset 25 would fit?
I am starting to into a set of winter wheels for M40i.

You will be fine.

[verysideways]

Originally Posted by gixxerboy63

There have been a few downed trees, power lines near and a few roads have ben closed due to flash flooding, but nothing major near us. We were a little worried about high winds and the possibility of a tornado, but that expired around midnight last night. Our lake is up, but not by a significant amount. There is some lingering concerns about excess water upstream.

It is beautiful outside today.

I think we're going to be fine.

That’s great to hear!
I have family and friends just west of Charlotte, they seem to be doing just fine too, thankfully.

[cto]

Originally Posted by gixxerboy63

You will be fine.

Thanks man!

Any recommendation of a tire size? Thinking about 255/50/19. Not sure if 255 would work with 9.5 width

[verysideways]

Originally Posted by cto

Thanks man!

Any recommendation of a tire size? Thinking about 255/50/19. Not sure if 255 would work with 9.5 width

Square set up? 255/50R19 all round should work just fine.

[nogren]

Originally Posted by nogren

7,5JX19 ET32 (245/55R19)

I must have slipped when typing that in. It should be 245/50R19. Sorry!

[RevNev]

These are 303M wheels on 15mm hub adaptors. Front 20x8.5 offset +25, rear 20x10 offset +41. The rears are "exactly" flush vertically with the lip of the flare and the front could go out another 5mm to be vertically flush. A rear combined offset of +26 with a 275 tyre is the absolute maximum without tyre protrusion past the lip of the flare. The combined offset of +10 on the front is 5mm inside the lip of the flare with a 245 tyre. Given this to me is borderline on rear poke, a rear offset of about 28/30 just keeps the tyre inside the lip. Someone mentioned 18mm spacers in the front and 15mm rear on standard 20" G01 wheels would be a pretty good choice for maximum poke without looking too radical. Shame the rear moulding doesn't have a bit more flare like the F25 M Sport body kit.

[cto]

Originally Posted by RevNev

These are 303M wheels on 15mm hub adaptors. Front 20x8.5 offset +25, rear 20x10 offset +41. The rears are "exactly" flush vertically with the lip of the flare and the front could go out another 5mm to be vertically flush. A rear combined offset of +26 with a 275 tyre is the absolute maximum without tyre protrusion past the lip of the flare. The combined offset of +10 on the front is 5mm inside the lip of the flare with a 245 tyre. Given this to me is borderline on rear poke, a rear offset of about 28/30 just keeps the tyre inside the lip. Someone mentioned 18mm spacers in the front and 15mm rear on standard 20" G01 wheels would be a pretty good choice for maximum poke without looking too radical. Shame the rear moulding doesn't have a bit more flare like the F25 M Sport body kit.

That looks great!!!

[Gimmethecash]

Originally Posted by RevNev

Shame the rear moulding doesn't have a bit more flare like the F25 M Sport body kit.

Looks great!

[Jayf30]

Was going to wait til I washed her but what the hell.

Wheels were inspired by gixxer

I actually ordered niche wheels first but one rim got lost in transit and 2 of the 3 I got were the wrong color/ finish.. dealt with horrible customer service so returned them rather than swapping out

20" TSW Bathurst in gloss gunmetal, I love that they match my dark graphite exterior perfectly.

Front 9x20 ET 35
Rear 10x20 ET 40

I can live with the offsets for now but I'll eventually put some spacers on, definitely for the front.

[GMV Auto]

Originally Posted by Jayf30

Was going to wait til I washed her but what the hell.

Wheels were inspired by gixxer

I actually ordered niche wheels first but one rim got lost in transit and 2 of the 3 I got were the wrong color/ finish.. dealt with horrible customer service so returned them rather than swapping out

20" TSW Bathurst in gloss gunmetal, I love that they match my dark graphite exterior perfectly.

Front 9x20 ET 35
Rear 10x20 ET 40

I can live with the offsets for now but I'll eventually put some spacers on, definitely for the front.

Very nice! u mind sharing tires sizes?

[Jayf30]

Originally Posted by barad55

Very nice! u mind sharing tires sizes?

I'm using the original tires that came with the oem 20" wheels, in this case the staggered pirelli p zero run flats so rear 275/40R20 and front 245/45R20.

I plan on just using these tires down to the point where it's acceptable for lease end or before then and then swapping them for some higher performance tires to replace them.

That's if I'm not in an X3M before then.. wishful thinking

[gixxerboy63]

Originally Posted by Jayf30

Was going to wait til I washed her but what the hell.

Wheels were inspired by gixxer

I actually ordered niche wheels first but one rim got lost in transit and 2 of the 3 I got were the wrong color/ finish.. dealt with horrible customer service so returned them rather than swapping out

20" TSW Bathurst in gloss gunmetal, I love that they match my dark graphite exterior perfectly.

Front 9x20 ET 35
Rear 10x20 ET 40

I can live with the offsets for now but I'll eventually put some spacers on, definitely for the front.

Congrats! It looks great!
Glad I could be a small inspiration to your build!

[CHATMAN]

Very nice! Will your current setup prevent the wheels from being curbed? I intend to get the front in 8.5 with a +20 ET. What do you think?

Originally Posted by Jayf30

Was going to wait til I washed her but what the hell.

Wheels were inspired by gixxer

I actually ordered niche wheels first but one rim got lost in transit and 2 of the 3 I got were the wrong color/ finish.. dealt with horrible customer service so returned them rather than swapping out

20" TSW Bathurst in gloss gunmetal, I love that they match my dark graphite exterior perfectly.

Front 9x20 ET 35
Rear 10x20 ET 40

I can live with the offsets for now but I'll eventually put some spacers on, definitely for the front.

[Jayf30]

Originally Posted by CHATMAN

Very nice! Will your current setup prevent the wheels from being curbed? I intend to get the front in 8.5 with a +20 ET. What do you think?

I think the wheels are pretty flush with the tires now so this setup doesn't really protect from curbing unfortunately.

That sounds ok, however they might stick out a tiny bit if at all but should work nonetheless!

[iManu]

Originally Posted by Llarry

G01 X3 and G02 X4 wheels specs...

Bolt pattern: 5 x 112. One of the problems is that BMW has used 5 x 120 for many years and is now transitioning to 5 x 112; an "experienced" wheel guy may not be up to date on this transition and get confused.

Width and offset: I know your question is about 20-inchers, but 30i model owners and those looking for 19" winter wheels may see this, so let me cover all X3 & X4 wheels. These numbers are for OE BMW wheels.

7" width offset 22mm

7.5" width offset 32mm

8" width offset 27mm

8.5" width offset 30mm

9.5" width offset 43mm

So for a 20" wheel for a M40i the stock/OE offsets are 27 front, 43 rear

Are these negative offset or positive? I'm trying to figure out if the 18 inch rims, 9 inch wide with an offset of 40 will fit.

[Llarry]

Originally Posted by emmanuel.yoo

Are these negative offset or positive? I'm trying to figure out if the 18 inch rims, 9 inch wide with an offset of 40 will fit.

All modern BMW wheels are negative offset.