[Douggie]

Originally Posted by lair12

Does it help to have this additional column that I added for the english translation of the Comments? I can do more files if it does.

Thanks for sharing!

[patrickkc]

Recently got a G05 X5 loaner and whenever I leave the door open the ambient lighting would flash red. Anybody know if that's possible to code in?

[stammix]

Anybody coded drl rear lights to stay on all the time?

[Shatter]

Originally Posted by stammix

Anybody coded drl rear lights to stay on all the time?

This is sadly not possible anymore in G-series like it was back in F-series.

[BobsM3Coupe]

So when I have ASD coded off with Bimmercode, what should it say?

Active, Inactive or Unassigned?

[Lanthanides]

Hi All,

I've already made some coding on my X3 M40i with Bimmercode, but I'm still looking for a few more codes that I didn't find when searching on the forum :

- Is it possible to add Shift Lights in the instrument cluster when approaching the rev limiter, like some M cars ?

- Is it possible to add the gear number besides the D in the instrument cluster when driving in Comfort/Adaptive and Eco mode ?

- Is there a way to have information about the oil temperature somewhere ?

Thanks a lot in advance

[ramparts]

can you code the digital clusters in the M40 to the X3M ones ?

[suby01]

Originally Posted by davidoff86

can you code the digital clusters in the M40 to the X3M ones ?

For ID7 yes. It is displayed in the other thread.

[ramparts]

Originally Posted by suby01

For ID7 yes. It is displayed in the other thread.

Originally Posted by suby01

For ID7 yes. It is displayed in the other thread.

But the X3M has I drive 6 ?

[suby01]

You asked about coding a X3M dash on a non X3M car. So the answer is yes you can code a X3M ID6 dash on a ID7 dash. However I do not know personally if you can also code it on a ID6, maybe someone else will confirm that for you. ]
So still without any details from you and what dash you have ID6 or ID7, I only attempted to tell you what I know to assist.

[suby01]

Originally Posted by davidoff86

But the X3M has I drive 6 ?

https://x3.xbimmers.com/forums/showp...1&postcount=28

[ramparts]

Originally Posted by suby01

https://x3.xbimmers.com/forums/showp...8;postcount=28

Originally Posted by suby01

https://x3.xbimmers.com/forums/showp...8;postcount=28

Dkombi4 is I drive 7.

We want to be able to use the I drive 6 m dials in our I drive 6 m40s

[sinbad4]

Some coding I've done using "expert" mode and BimmerCode (my2020 iDrive7 - though may work for iDrive6):


# Fix Speedo running too high
Instrument Cluster (DKOMBI4): BC_V_KORREKTUR mit_korrecktur --> ohne_korrektur

# Fog light on with high beams (US default Off)
BDC: NSW_AUS_BEI_FL active --> nict_active

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

# Change logo displayed in Instrument Cluster
Instrument Cluster (DKOMBI4): LOGO_SCHRIFTZUG (default) --> (any) 'kein_logo' to remove.

Note: When using BimmerCode expert mode, you can scroll up to get search dialog and put in at least a partial search to get desired setting menu.

[Jeepersjoey]

That is the one setting that I did not touch. My theory is that since the ODO is sacred ground for all reporting, it was not something I wanted to touch.

I got royally screwed when I traded in a car that has "Mileage Unknown" stamped across the Carfax when the dealer pulled it.

The story is that when bought it, we went away and got the loan. When we returned, all the sales guys were lined up in front of our car (CHIMP - CHevy IMPala 2005) laughing. The stepped aside and the left side was squished. The snowplow had run into it.
They said "We will fix it". I said Ok!

Jump ahead 9 years and I find out that I bought with 26K miles, work was performed at 36k miles, and then I licensed it at 26K miles. Because of a typo, my car was branded with "Mileage Unknown" even though it was CLEAR what happened when someone with a brain looked at the Carfax.

The dealer dropped the price from $3200 to $1700 and said take it or leave it.

We took it.

So...I always view anything that modifies the ODO as the one area that we should not touch.

I am interested in your perspective. Expecially since I have 2 sets of rims/tires that show 7 mph fast at 70 (i.e. shows 77 when the GPS in the radar shows 70 mph).

Paul

[/QUOTE]
# Fix Speedo running too high
Instrument Cluster (DKOMBI4): BC_V_KORREKTUR mit_korrecktur --> ohne_korrektur
[/QUOTE]

[sinbad4]

Originally Posted by Jeepersjoey

That is the one setting that I did not touch. My theory is that since the ODO is sacred ground for all reporting, it was not something I wanted to touch.

Don't confuse speedo with odometer. It's two different reporting criterial - not a single cable driving a mechanical speedometer.

BMW adds a speed correction element.. not sure why; as it makes many models read 3-4mph fast. This does not seem to impact actual mileage recorded.

See:
https://x3.xbimmers.com/forums/showthread.php?t=1438826

[merocasper]

Hi
My car X3 G01 do not has tpms
So i bought 4 tpms aftermarket to show me pressure and temp.
I want to code it on X3 G01
I want help
Tried it by Carly but not done

[Shatter]

BDC_BODY: VAM_HORN_AT_SECURE
Disables the annoying horn honk if the car is running and you lock the doors.

BDC_BODY: FesPiaDefaultLastUserMode
Change normal driving mode, original is Comfort.

1 - Sport
2 - Sport+
3 - Sport Individual
4 - Comfort
5 - Comfort+
6 - Comfort Individual
7 - Eco
8 - Eco+
9 - Eco Individual
0A - Adaptive

[lair12]

You can do this in BimmerCode as well.

[g0t2bmiirii]

Need some help here. These are the only options i have for my 2020 X3 M40 using the MHD (black) any suggestions ? And there isn't much to adjust here for me. I did a few little things but other stuff i wanted to do i couldn't

[MdW86]

Originally Posted by Shatter

BDC_BODY: VAM_HORN_AT_SECURE
Disables the annoying horn honk if the car is running and you lock the doors.

BDC_BODY: FesPiaDefaultLastUserMode
Change normal driving mode, original is Comfort.

1 - Sport
2 - Sport+
3 - Sport Individual
4 - Comfort
5 - Comfort+
6 - Comfort Individual
7 - Eco
8 - Eco+
9 - Eco Individual
0A - Adaptive

Originally Posted by Shatter

BDC_BODY: VAM_HORN_AT_SECURE
Disables the annoying horn honk if the car is running and you lock the doors.

BDC_BODY: FesPiaDefaultLastUserMode
Change normal driving mode, original is Comfort.

1 - Sport
2 - Sport+
3 - Sport Individual
4 - Comfort
5 - Comfort+
6 - Comfort Individual
7 - Eco
8 - Eco+
9 - Eco Individual
0A - Adaptive

What is comfort+ and individual? Normally you cant choose those, if im correct?

[ptcs]

Could someone help out with how you apply full screen CarPlay? I already have it active but with the split screen and want to enable full screen like ID7.

[g0t2bmiirii]

Originally Posted by ptcs

Could someone help out with how you apply full screen CarPlay? I already have it active but with the split screen and want to enable full screen like ID7.

It's not full screen for you?? If i go to media then click car play it'll take up my whole screen. Almost like loading up an app but it's loads up CarPlay and it takes over the whole screen for me. Didn't do any coding on that