BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      01-20-2022, 06:57 PM   #1
snoopyxdy
Registered
China
2
Rep
3
Posts

Drives: x3m competition
Join Date: Jan 2022
Location: china

iTrader: (0)

resolve x3m deviation and steering feel bad

Recently my x3m has an accident, I drive car want to left lane change, but hit the car on the left,my car's left rear suspension was broken.
To fix it, I replace the Left lower swing arm with a new one.

But, when the car is repaired, I found the car go deviation and steering feel bad.The car can hardly travel in a straight line, I have to adjust my Steering wheel often.

I bring my car to bmw repair shop to do wheel alignment and clear steering memory, but the problem still have.

Finally, I have to do Cable four-wheel alignment to fix the problem.

Thank goodness, my x3m steering feel good as before, and the car can go straight line again!

Name:  QQ20220121-085040@2x.png
Views: 433
Size:  2.28 MB
has accident

Name:  QQ20220121-085422@2x.png
Views: 359
Size:  2.47 MB
Bending of lower swing arm

Name:  QQ20220121-085413@2x.png
Views: 393
Size:  3.59 MB
3D four wheel alignment not fix the problem

Name:  QQ20220121-085434@2x.png
Views: 388
Size:  1.58 MB
Cable four-wheel alignment

Name:  QQ20220121-085444@2x.jpg
Views: 402
Size:  196.9 KB
Cable four-wheel alignment

Last edited by snoopyxdy; 01-20-2022 at 07:22 PM..
Appreciate 0
      01-20-2022, 07:03 PM   #2
trail hopper
Private
36
Rep
65
Posts

Drives: 2022 X3
Join Date: Jan 2022
Location: Virginia

iTrader: (0)

Quote:
Originally Posted by snoopyxdy View Post

Finally, I have to do Cable four-wheel alignment to fix the problem.
If I am reading this correctly you had a bent frame and getting that straightened was the final step in repairing your car. Glad you got it fixed up!
Appreciate 0
      01-20-2022, 07:15 PM   #3
snoopyxdy
Registered
China
2
Rep
3
Posts

Drives: x3m competition
Join Date: Jan 2022
Location: china

iTrader: (0)

Quote:
Originally Posted by snoopyxdy View Post
Recently my x3m has an accident, I drive car want to left lane change, but hit the car on the left,my car's left rear suspension was broken.
To fix it, I replace the Left lower swing arm with a new one.

But, when the car is repaired, I found the car deviation and steering feel bad.The car can hardly travel in a straight line, I have to adjust my direction often.

I bring my car to bmw repair shop to do wheel alignment and clear steering memory, but the problem still have.

Finally, I have to do Cable four-wheel alignment to fix the problem.

Thank goodness, my x3m steering feel good as before, and the car can go straight line again!

Attachment 2793258

Attachment 2793257

Attachment 2793256

Attachment 2793255

Attachment 2793254
Quote:
Originally Posted by trail hopper View Post
If I am reading this correctly you had a bent frame and getting that straightened was the final step in repairing your car. Glad you got it fixed up!
Getting the swing arm straightened was the first step in repairing.Finally I have redo the Cable four-wheel alignment to fix the toe angle not correctly.
Appreciate 0
      01-20-2022, 09:50 PM   #4
Coi
First Lieutenant
United_States
289
Rep
323
Posts

Drives: 21 X3 M40i, 07 Z4MR
Join Date: Mar 2021
Location: Cal

iTrader: (0)

Was the swing arm (control arm) straightened or replaced? On an expensive car it's much better to replace these parts than to bend them back into shape. A part that was straightened won't have the same strength and probably not the same shape as a new replacement.
Appreciate 0
      01-22-2022, 09:03 AM   #5
snoopyxdy
Registered
China
2
Rep
3
Posts

Drives: x3m competition
Join Date: Jan 2022
Location: china

iTrader: (0)

Quote:
Originally Posted by Coi View Post
Was the swing arm (control arm) straightened or replaced? On an expensive car it's much better to replace these parts than to bend them back into shape. A part that was straightened won't have the same strength and probably not the same shape as a new replacement.
The swing arm has been replaced a new one, bend them back is not a good idea.
Appreciate 1
Coi288.50
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:29 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST