[EndoDoc]

Folks,

It appears my harness loom that runs over the foam just under the cowl is missing the torx screws on both sides, I think there are three on the passenger side and two on the driver side. I just can't seem to find them on the parts diagrams. Can someone snap a photo of the type so I can match them to FCP Euro site to order the five I need. My BMW is the F25 35i

Best,

Aleks

[Marty in NY]

Originally Posted by EndoDoc

Folks,

It appears my harness loom that runs over the foam just under the cowl is missing the torx screws on both sides, I think there are three on the passenger side and two on the driver side. I just can't seem to find them on the parts diagrams. Can someone snap a photo of the type so I can match them to FCP Euro site to order the five I need. My BMW is the F25 35i

Best,

Aleks

Can you post of pic or two showing where yours are missing? It would help determine what location you are referring to.

[EndoDoc]

Hope this helps

[Marty in NY]

Originally Posted by EndoDoc

Hope this helps

Yup, sure did. It was tough getting the pix to be in focus but here are what mine look like, not sure of the Torx size though as I'm not at home with my Torx set.

.

[EndoDoc]

Awesome, when you get a chance can you tell me the torx size, maybe a photo of the entire screw?

[Marty in NY]

Originally Posted by EndoDoc

Awesome, when you get a chance can you tell me the torx size, maybe a photo of the entire screw?

I have no way to remove the screw and cannot visually tell which Torx size it is but if you go to your local auto parts store, I am sure they will find the right size for you and probably have some of the screws for you to buy.