MSS urban adjustable springs for X3 M

AlexFL · 07-20-2020, 04:56 PM

Quote:

Originally Posted by knepsterd

What is it voiding????

It voids the iDrive warranty lol

knepsterd · 07-20-2020, 05:47 PM

Quote:

Originally Posted by AlexFL

Quote:

Originally Posted by knepsterd

What is it voiding????

It voids the iDrive warranty lol

r33_RGSport · 07-20-2020, 10:05 PM

Quote:

Originally Posted by JaeP

How about if you let out a little air but also change the tires to all season 20 inch - would it change the rebound with softer sidewalls ?

My dealer in MA said MSS springs may void the warranty so he'd avoid it. I'd love to get the MSS on my X3M (non-comp) for the pothole bumpy roads around here.

Go to different dealer.

AlexFL · 07-20-2020, 10:18 PM

Quote:

Originally Posted by r33_RGSport

Go to different dealer.

Ben, are you going to return to civilization anytime soon?

r33_RGSport · 07-20-2020, 10:21 PM

Quote:

Originally Posted by AlexFL

Ben, are you going to return to civilization anytime soon?

I am back.

All refreshed, but already got beaten up on first day back to work.

AlexFL · 07-20-2020, 10:26 PM

Quote:

Originally Posted by r33_RGSport

I am back.

All refreshed, but already got beaten up on first day back to work.

It sounds like you installed some springs and the customer now blames you for transmission failure

r33_RGSport · 07-20-2020, 10:28 PM

Quote:

Originally Posted by AlexFL

It sounds like you installed some springs and the customer now blames you for transmission failure

EpicSurge · 08-02-2020, 04:38 PM

just got mine installed, i opted to keep the ride stock height for maximum comfort. the car ended up looking about half an inch lower than stock, also are the bottom springs supposed to be that compressed? i felt like i bottomed out today while i was driving

EpicSurge · 08-02-2020, 05:27 PM

looking into the issue, i found the shop i took it in to did not follow the MSS instructions. MSS instructions require you to install the rear springs first, because you need to use the OEM bumpstops (after replacing the rear with the MSS provided bumpstops) for the front springs.

r33_RGSport · 08-02-2020, 08:39 PM

Quote:

Originally Posted by EpicSurge

looking into the issue, i found the shop i took it in to did not follow the MSS instructions. MSS instructions require you to install the rear springs first, because you need to use the OEM bumpstops (after replacing the rear with the MSS provided bumpstops) for the front springs.

Ugh.
Shop like that shouldn't be in business.
Ruining good product reputation just because they are lazy to read.
And based on what I can tell from your adjuster length, you are pretty low, not even close to stock height.

r33_RGSport · 08-02-2020, 08:41 PM

Quote:

Originally Posted by Michael19887

Quote:

Originally Posted by EpicSurge

looking into the issue, i found the shop i took it in to did not follow the MSS instructions. MSS instructions require you to install the rear springs first, because you need to use the OEM bumpstops (after replacing the rear with the MSS provided bumpstops) for the front springs.

Thanks...this is what I received back after I had mine installed this week. I am not as familiar with the parts, but could I have the same issue with installation? Mine also settling much lower than expected (was supposed to be 1/4" of a drop, more like 1"+) and is making clunking noises when turning at low speeds and has bumped. I'm taking it back in this week to have them checked and try stock height.

Your installer did the same thing.
Front bump stop didn't get changed per instruction and dust cover didn't get re-used.

AlexFL · 08-02-2020, 08:53 PM

wow, this is terrible. That's why I made sure my shop takes Ben's installation recommendations - to avoid crap like this.

gallagher · 08-02-2020, 09:53 PM

Quote:

Originally Posted by AlexFL

James, I would say it’s pretty comparable to my previous F82. It also depends on the adjusted height. I dropped mine by one inch (see photo below) and I find the ride quality absolutely acceptable. However, do not expect a radical change. It won’t turn the X3M into an air-riding Escalade.

Alex - Where did you have your MSS kit installed. I live in WPB and have used MotorHaus in the past for other BMWs I’ve owned. They are super knowledgeable and meticulous, but this install sounds like it’s a bit nuanced. Where do you recommend in this area?

AlexFL · 08-02-2020, 10:01 PM

Quote:

Originally Posted by gallagher

Alex - Where did you have your MSS kit installed. I live in WPB and have used MotorHaus in the past for other BMWs I’ve owned. They are super knowledgeable and meticulous, but this install sounds like it’s a bit nuanced. Where do you recommend in this area?

I get all my work done locally at Extreme Performance (https://www.extremeperformance.biz/) in Palm City. However, you can also ask John at Eurowerks Automotive in Boca to install it. I know they have installed at least one set. They are extremely good.

matt9999 · 08-02-2020, 11:14 PM

Potentially the same problem in Australia. Just had mine installed and the back seems to be sitting very low. Though the workshop talked to the importer through the install and are saying they are sure they did it correctly. Is there an obvious tell as to whether there is a problem with the install?

matt9999 · 08-03-2020, 05:22 AM

Quote:

Originally Posted by matt9999

Potentially the same problem in Australia. Just had mine installed and the back seems to be sitting very low. Though the workshop talked to the importer through the install and are saying they are sure they did it correctly. Is there an obvious tell as to whether there is a problem with the install?

Or another way to ask the question - what problems are you going to run into if the rear OEM bump stop was not swapped through to the front, during the install, i.e. the front was done first and then the rears?

matt9999 · 08-03-2020, 05:41 AM

I am aware those are some noob questions...

MJDBMW · 08-03-2020, 06:29 AM

Quote:

Originally Posted by gallagher

Quote:

Originally Posted by AlexFL

James, I would say it’s pretty comparable to my previous F82. It also depends on the adjusted height. I dropped mine by one inch (see photo below) and I find the ride quality absolutely acceptable. However, do not expect a radical change. It won’t turn the X3M into an air-riding Escalade.

Alex - Where did you have your MSS kit installed. I live in WPB and have used MotorHaus in the past for other BMWs I’ve owned. They are super knowledgeable and meticulous, but this install sounds like it’s a bit nuanced. Where do you recommend in this area?

Eurowerks did my MSS install and at least one other. They do really nice work! Ask for Jared or John.

BOEING 777 · 08-03-2020, 07:12 AM

Quote:

Originally Posted by gallagher

Alex - Where did you have your MSS kit installed. I live in WPB and have used MotorHaus in the past for other BMWs I’ve owned. They are super knowledgeable and meticulous, but this install sounds like it’s a bit nuanced. Where do you recommend in this area?

Gallagher just like Alex said John at Eurowerks is pretty good they installed mine and Mark's also they are pretty good and has done all the other mods on my car and other BMWs I have had.They are in Pompano Beach.

elisiX · 08-04-2020, 11:20 AM

matt9999 who did your install?

I'm just about to order these from RollingStock in Sydney.

Sounds like instructions must be followed carefully.

gallagher · 08-04-2020, 10:57 PM

Quote:

Originally Posted by BOEING 777

Gallagher just like Alex said John at Eurowerks is pretty good they installed mine and Mark's also they are pretty good and has done all the other mods on my car and other BMWs I have had.They are in Pompano Beach.

Thanks, fellas. Appreciate the recs. I will give them a call once my kit arrives.

elisiX · 08-05-2020, 11:34 AM

Are many of you running 15mm spacers with a mild drop?

Keen to see if 15mm is too much or whether 12mm makes more sense.

08-02-2020, 04:38 PM	#294
EpicSurge Enlisted Member 12 Rep 31 Posts Drives: 2020 X3MC Join Date: Jul 2014 Location: Flushing, Queens iTrader: (0)	just got mine installed, i opted to keep the ride stock height for maximum comfort. the car ended up looking about half an inch lower than stock, also are the bottom springs supposed to be that compressed? i felt like i bottomed out today while i was driving Attached Images
	Appreciate 0 Quote

08-02-2020, 05:27 PM	#295
EpicSurge Enlisted Member 12 Rep 31 Posts Drives: 2020 X3MC Join Date: Jul 2014 Location: Flushing, Queens iTrader: (0)	looking into the issue, i found the shop i took it in to did not follow the MSS instructions. MSS instructions require you to install the rear springs first, because you need to use the OEM bumpstops (after replacing the rear with the MSS provided bumpstops) for the front springs. Attached Images
	Appreciate 0 Quote

08-02-2020, 08:53 PM	#298
AlexFL Brigadier General 7837 Rep 4,607 Posts Drives: BMW Join Date: Jun 2019 Location: South Florida iTrader: (0)	wow, this is terrible. That's why I made sure my shop takes Ben's installation recommendations - to avoid crap like this.
	Appreciate 1 r33_RGSport12971.00 Quote

08-02-2020, 11:14 PM	#301
matt9999 Enlisted Member 30 Rep 43 Posts Drives: X4M Join Date: Jul 2020 Location: Australia iTrader: (0)	Potentially the same problem in Australia. Just had mine installed and the back seems to be sitting very low. Though the workshop talked to the importer through the install and are saying they are sure they did it correctly. Is there an obvious tell as to whether there is a problem with the install?
	Appreciate 0 Quote

08-03-2020, 05:41 AM	#303
matt9999 Enlisted Member 30 Rep 43 Posts Drives: X4M Join Date: Jul 2020 Location: Australia iTrader: (0)	I am aware those are some noob questions...
	Appreciate 0 Quote

08-04-2020, 11:20 AM	#306
elisiX Major 687 Rep 1,328 Posts Drives: '20 X3M Competition Join Date: Oct 2015 Location: Sydney, Australia iTrader: (0)	matt9999 who did your install? I'm just about to order these from RollingStock in Sydney. Sounds like instructions must be followed carefully. __________________ 2020 BMW X3M Competition ///M - ALPINE WHITE / SAKHIR ORANGE Past: 18' BMW M3CS \| 18' BMW X5M \| '17 BMW M3 Competition \| '16 Mercedes GLC250 \| '16 BMW X5M \| '15 BMW X5 M50d \| '14 Audi SQ5
	Appreciate 0 Quote

08-05-2020, 11:34 AM	#308
elisiX Major 687 Rep 1,328 Posts Drives: '20 X3M Competition Join Date: Oct 2015 Location: Sydney, Australia iTrader: (0)	Are many of you running 15mm spacers with a mild drop? Keen to see if 15mm is too much or whether 12mm makes more sense.
	Appreciate 0 Quote