Coding your 2018 X3

cvee · 01-30-2018, 06:54 PM

Quote:

Originally Posted by rdgo61

Could i get a list of Options please? I purchased vgate and bimmercode but dont currently see a way of setting auto start stop to Off. Interested in that and enhanced bluetooth. I was able to deactivate the initial legal popup.

If you go to bimmercode website you can see for each model which options exist. It’s a smaller list for G01 currently... but that will change over time.

Looking at the options in general can be confusing... because certain coding options in one car can be be standard in another.

I’m going to use the car “when it arrives” and work out what bugs me. Then seek out if there are coding options to address them.

voyagergab · 01-30-2018, 09:39 PM

Big thanks to Almaretto for coding our x3 today.
This guy knows exactly what he's doing and did an excellent job.

pskdude · 01-31-2018, 07:45 AM

Quote:

Originally Posted by voyagergab

Big thanks to Almaretto for coding our x3 today.
This guy knows exactly what he's doing and did an excellent job.

Totally did mine as well. Very informative and willing to help, highly recommend if like myself is your first time.

papajohn · 02-04-2018, 12:57 AM

Quote:

Originally Posted by voyagergab

The OBD to Ethernet cable from amazon came in today. As well as the escort hardwire cable.
I'm out of town this week so the coding will have to wait till next week unfortunately

Can you link to the one you bought please? I see 3 up there, 2 with no reviews and 1 with 75% "doesn't work" reviews.

voyagergab · 02-04-2018, 01:07 AM

Quote:

Originally Posted by papajohn

Quote:

Originally Posted by voyagergab

The OBD to Ethernet cable from amazon came in today. As well as the escort hardwire cable.
I'm out of town this week so the coding will have to wait till next week unfortunately

Can you link to the one you bought please? I see 3 up there, 2 with no reviews and 1 with 75% "doesn't work" reviews.

Here you go.

BMW ENET(Ethernet to OBD) Interface BMW LAN CABLE OBDII https://www.amazon.ca/dp/B01MXYY0EP/..._P9NBpGtjNS3L2

papajohn · 02-04-2018, 01:15 AM

Quote:

Originally Posted by voyagergab

Here you go.

BMW ENET(Ethernet to OBD) Interface BMW LAN CABLE OBDII https://www.amazon.ca/dp/B01MXYY0EP/..._P9NBpGtjNS3L2

Thanks man!

voyagergab · 02-04-2018, 01:16 AM

Quote:

Originally Posted by papajohn

Quote:

Originally Posted by voyagergab

Here you go.

BMW ENET(Ethernet to OBD) Interface BMW LAN CABLE OBDII https://www.amazon.ca/dp/B01MXYY0EP/..._P9NBpGtjNS3L2

Thanks man!

Sure any time.

caeguy · 02-04-2018, 08:22 AM

I'm very interested in the coding of anti-dazzle....among other items. Looking through the various models on bimmercode, I don't see this option available on any model. Is there an expectation that this would be available at some point for the G01 or can this coding only be done via e-sys?

BTW- Still new to all this coding stuff so please forgive me if my terminology is off.

focker · 02-04-2018, 11:25 AM

Almaretto I would appreciate a list of coding options....

Dillinger · 02-05-2018, 03:05 AM

Quote:

Originally Posted by focker

Almaretto I would appreciate a list of coding options....

Ditto, please.

caeguy · 02-05-2018, 06:35 AM

Almaretto Me to

Almaretto · 02-05-2018, 11:42 AM

Quote:

Originally Posted by caeguy

I'm very interested in the coding of anti-dazzle....among other items. Looking through the various models on bimmercode, I don't see this option available on any model. Is there an expectation that this would be available at some point for the G01 or can this coding only be done via e-sys?

BTW- Still new to all this coding stuff so please forgive me if my terminology is off.

Doubt it will be added.

Quote:

Originally Posted by focker

Almaretto I would appreciate a list of coding options....

Quote:

Originally Posted by Dillinger

Ditto, please.

Quote:

Originally Posted by caeguy

Almaretto Me to

PM's Sent

utcadman · 02-05-2018, 12:44 PM

Please send me pm as well

Thanks!

oserx · 02-05-2018, 01:21 PM

@Almaretto - pls send it to me also ... my car will arrive at the end of march, but at least I have something to look to

)
Thanks

JAM2 · 02-05-2018, 08:40 PM

Quote:

Originally Posted by utcadman

Please send me pm as well

Thanks!

Me too please

iManu · 02-05-2018, 10:44 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by caeguy

I'm very interested in the coding of anti-dazzle....among other items. Looking through the various models on bimmercode, I don't see this option available on any model. Is there an expectation that this would be available at some point for the G01 or can this coding only be done via e-sys?

BTW- Still new to all this coding stuff so please forgive me if my terminology is off.

Doubt it will be added.

Quote:

Originally Posted by focker

Almaretto I would appreciate a list of coding options....

Quote:

Originally Posted by Dillinger

Ditto, please.

Quote:

Originally Posted by caeguy

Almaretto Me to

PM's Sent

Me to please!

Almaretto · 02-05-2018, 10:58 PM

Quote:

Originally Posted by JAM2

Me too please

Quote:

Originally Posted by oserx

@Almaretto - pls send it to me also ... my car will arrive at the end of march, but at least I have something to look to

)
Thanks

Quote:

Originally Posted by utcadman

Please send me pm as well

Thanks!

PM's Sent

papajohn · 02-05-2018, 11:24 PM

ditto that... interested in the list of options you can code on a N American G01, please. And are you using E-sys and the standard RJ45 to ODB cable for everything you do or are other tools / software required for the new gen X3?

Almaretto · 02-06-2018, 12:19 AM

Quote:

Originally Posted by papajohn

ditto that... interested in the list of options you can code on a N American G01, please. And are you using E-sys and the standard RJ45 to ODB cable for everything you do or are other tools / software required for the new gen X3?

PM Sent

E-sys, Launcher, & PSdZ are used to code all Fxx/Ixx/Gxx-series BMW's, F-series mini, and Rolls-Royce (F/G-series platform).

iManu · 02-06-2018, 08:12 AM

Can I have the list to please?

Almaretto · 02-06-2018, 09:28 AM

Quote:

Originally Posted by emmanuel.yoo

Can I have the list to please?

PM Sent

tyranimo · 02-06-2018, 10:15 PM

Hi Almaretto, wondering if there was a cost involved?

01-30-2018, 09:39 PM	#90
voyagergab Major 633 Rep 1,083 Posts Drives: G82 M4 6MT, G01/F97 X3M Join Date: May 2014 Location: Calgary, AB iTrader: (0)	Big thanks to Almaretto for coding our x3 today. This guy knows exactly what he's doing and did an excellent job.
	Appreciate 1 Almaretto2374.00 Quote

02-04-2018, 08:22 AM	#96
caeguy Private 28 Rep 63 Posts Drives: 2018 BMW X30i Join Date: Jan 2018 Location: CT iTrader: (0)	I'm very interested in the coding of anti-dazzle....among other items. Looking through the various models on bimmercode, I don't see this option available on any model. Is there an expectation that this would be available at some point for the G01 or can this coding only be done via e-sys? BTW- Still new to all this coding stuff so please forgive me if my terminology is off.
	Appreciate 0 Quote

02-04-2018, 11:25 AM	#97
focker Second Lieutenant 155 Rep 201 Posts Drives: 2018 BMW X3 M40i Join Date: Jan 2018 Location: Sacramento, CA iTrader: (0) Garage List 2018 VW GTI Autobahn [0.00] 2011 Audi A4 Avant [0.00] 2018 BMW X3 M40i [0.00]	Almaretto I would appreciate a list of coding options....
	Appreciate 0 Quote

02-05-2018, 06:35 AM	#99
caeguy Private 28 Rep 63 Posts Drives: 2018 BMW X30i Join Date: Jan 2018 Location: CT iTrader: (0)	Almaretto Me to
	Appreciate 0 Quote

02-05-2018, 12:44 PM	#101
utcadman Second Lieutenant 88 Rep 210 Posts Drives: X5 M50i Join Date: Jun 2011 Location: Park City UT iTrader: (0) Garage List 2021 BMW X5 M50i [0.00] 2018 BMW X3 M40i [0.00] 2011 BMW X3 3.5i [0.00]	Please send me pm as well Thanks!
	Appreciate 0 Quote

02-05-2018, 01:21 PM	#102
oserx Private First Class 17 Rep 136 Posts Drives: G01 X3 / F30 3 Series LCI Join Date: Jul 2008 Location: Romania iTrader: (0)	@Almaretto - pls send it to me also ... my car will arrive at the end of march, but at least I have something to look to ) Thanks
	Appreciate 0 Quote

02-05-2018, 11:24 PM	#106
papajohn Private 63 Rep 86 Posts Drives: 2018 X3 M40i Join Date: Jan 2018 Location: Austin, TX iTrader: (0)	ditto that... interested in the list of options you can code on a N American G01, please. And are you using E-sys and the standard RJ45 to ODB cable for everything you do or are other tools / software required for the new gen X3?
	Appreciate 0 Quote

02-06-2018, 08:12 AM	#108
iManu First Lieutenant 142 Rep 320 Posts Drives: 2018 X3M40i Join Date: Oct 2015 Location: Montreal iTrader: (0)	Can I have the list to please?
	Appreciate 0 Quote

02-06-2018, 10:15 PM	#110
tyranimo Private First Class 29 Rep 132 Posts Drives: 228xi Join Date: Jul 2014 Location: Calgary, AB iTrader: (0)	Hi Almaretto, wondering if there was a cost involved?
	Appreciate 0 Quote