[cjn]

Originally Posted by wlfpck

2020 X3 M40i here....
My anti-dazzle/auto-high beam light has to manually be activated every time I start the car. Get in, start car, hit the button on the side of the blinker stalk.
Is there a way to have it remember that I had turned it on and for it to stay on?

My 2021 F40 may work differently, but check that you have pressed the AUTO button on the main light switch. The indicator light in the switch should be lit. Then press the lower button in the indicator stalk, to select the clever stuff. It should all work every time unless you change anything. I leave mine alone and never have to reset it. The lights work perfectly without any intervention from me.

[MMnut]

Originally Posted by cjn

My 2021 F40 may work differently, but check that you have pressed the AUTO button on the main light switch. The indicator light in the switch should be lit. Then press the lower button in the indicator stalk, to select the clever stuff. It should all work every time unless you change anything. I leave mine alone and never have to reset it. The lights work perfectly without any intervention from me.

Later models remember that settings but not with old one. My 2019 does not remember it, but 2021 does.

[kristof_x3]

May I request that anybody with a '23 or '24 X3 please share the below info from any coding app?

It would be great to see if they just coded the display dimming curve differently with the new units!

Could you please let me know what values are below for you?

Headunit
3005 APIX_CID_UND_ZIN
DIM_CURVE_X2

Default values are 0x1F and 0xC0

Thank you!!!

[Matei7]

I have a BMW 30E(2020) with M-package but in the HUD its displayed as Sportline not as M Sport. I've tried to change the TRIM_LINE option but doesn't really work, only if I select XLine option.
Also, I've tried to replace my eDrive logo from instrumental cluster but no success to change it to M.


Any advice?

[Zircular]

Anyone know if it’s possible to code DRLs not to activate when the light switch is set to parking lights only (position 2)? The manual indicates that’s an option in some markets but apparently not default in my US market car (LCI). I can turn DRLs off entirely in iDrive but I’d rather not.