[deltaplaned]

When reverse gear is engaged, the side mirrors lower slightly and turn towards the car, minimizing the “blind” zone.

So, the right mirror turn towards, but the left don't.

Is it correct or must be coded additionally?

[Wgosma]

Originally Posted by deltaplaned

When reverse gear is engaged, the side mirrors lower slightly and turn towards the car, minimizing the “blind” zone.

So, the right mirror turn towards, but the left don't.

Is it correct or must be coded additionally?

I believe only the passenger side mirror will tilt downward; driver side mirror will not.

[deltaplaned]

Originally Posted by Wgosma

I believe only the passenger side mirror will tilt downward; driver side mirror will not.

thanks, what app do you use, or if you can, give me the code to view in E-Sys.
thanks!

and additional question..
if the passenger doesn't sit down, the led "AirBag for passenger 2 is OFF" is on.
if the passenger sit down, the led will off.

Is this the correct statues?
Can be coded to be always the led in off?

[Wgosma]

I'm using BimmerCode app.

I don't think you can code the airbag, yours is I believe operating properly.

[deltaplaned]

Originally Posted by Wgosma

I'm using BimmerCode app.

I don't think you can code the airbag, yours is I believe operating properly.

probably I cannot code the airbag.

because I am newbie in X3, I dont know how must be.
can you verify to your car, is the same LED always ON?

[Wgosma]

In overhead console, the airbag warning lamp is illuminated if passenger seat is not occupied.