[LikeNo1]

Again on Esys 3.30.1 and on the "free" version of the LauncherPro 2.8.1 by TM:
I've got my Istep updated by BMW to the F025-23-07-530 version due to the recall about the egr leaks issue on B47 engine.

Now I must apply back the tons of codings I've made in the past 2 years
Can I use the version of esys I have withount any problems of mapping data (I'm getting the newest PSDZdata)
or I must update to the latest versions and use a new launcher (like B.U. or whathever)?

And if my esys&luancher versions still working for my actual car, starting from which chassis/year will those sw needs to be updated?
Thanks to anyone who can give a final verdict on the LauncherPro2.8.1 era

[shawnsheridan]

Originally Posted by LikeNo1

Again on Esys 3.30.1 and on the "free" version of the LauncherPro 2.8.1 by TM:
I've got my Istep updated by BMW to the F025-23-07-530 version due to the recall about the egr leaks issue on B47 engine.

Now I must apply back the tons of codings I've made in the past 2 years
Can I use the version of esys I have withount any problems of mapping data (I'm getting the newest PSDZdata)
or I must update to the latest versions and use a new launcher (like B.U. or whathever)?

And if my esys&luancher versions still working for my actual car, starting from which chassis/year will those sw needs to be updated?
Thanks to anyone who can give a final verdict on the LauncherPro2.8.1 era

Mapping is ECU CAFD specific. E-Sys Launcher PRO 2.8.1 was initially released in Aug 2017. Any CAFD changed or added by BMW AG since then will have mapping issues.

[LikeNo1]

Originally Posted by shawnsheridan

Mapping is ECU CAFD specific. E-Sys Launcher PRO 2.8.1 was initially released in Aug 2017. Any CAFD changed or added by BMW AG since then will have mapping issues.

Thank you.
So It'time to pass over.

[shawnsheridan]

Originally Posted by LikeNo1

Thank you.
So It'time to pass over.

[fearltheunknown]

shawnsheridan

would you be able to generate me a fcs code for a 2012 f30 nbt please?

and how much does it cost?

[shawnsheridan]

Originally Posted by fearltheunknown

shawnsheridan

would you be able to generate me a fcs code for a 2012 f30 nbt please?

and how much does it cost?

PM sent.

[SeMuYa]

Hi there,

need the latest PSZDATA links. CAn you help me out with this?

BR, Semih

[shawnsheridan]

Originally Posted by SeMuYa

Hi there,

need the latest PSZDATA links. CAn you help me out with this?

BR, Semih

PM sent.

[MrBeele]

Hi,

Could someone send me a link for esys 3.38.2 or later and the PSZDATA files for an LCI iX3? For use with bimmerutility.

Thx in advance.

Kr.

[shawnsheridan]

Originally Posted by MrBeele

Hi,

Could someone send me a link for esys 3.38.2 or later and the PSZDATA files for an LCI iX3? For use with bimmerutility.

Thx in advance.

Kr.

PM sent.

[alefel]

Hi shawnsheridan I’m also in an ix3 LCI 2022 and would love a download link to latest pszdata and esys, possible to send me?

[shawnsheridan]

Originally Posted by alefel

Hi shawnsheridan I’m also in an ix3 LCI 2022 and would love a download link to latest pszdata and esys, possible to send me?

PM sent.

[Aschne23]

Hi shawnsheridan

I would also need a download link to latest pszdata and esys.
Is it possible to send me?

Happy new year and thank you in advance!

[shawnsheridan]

Originally Posted by Aschne23

Hi shawnsheridan

I would also need a download link to latest pszdata and esys.
Is it possible to send me?

Happy new year and thank you in advance!

PM sent.

[ahusar92]

Hey, can you share with me the latest esys (including launcher) + pszdata? Cheers!

[shawnsheridan]

Originally Posted by ahusar92

Hey, can you share with me the latest esys (including launcher) + pszdata? Cheers!

PM sent.

[Matt_BX3]

New member here.. appreciate some advice!

I’ve got a 2012 F25 X3. PDCs stopped working and after checking all wiring and sensors it seems the JBE module was at fault (ISTA seemed to agree).

So I now have a second hand replacement JBE module. Fitted to the car and it works, but features such as heated seats, auto wipe etc aren’t working. I assume this is because the car the JBE came from didn’t have these. ISTA is also telling me the module isn’t coded to the car.

My understanding is that I need to code the new module to the car, which I can do with E-SYS using the process Shawn has written in quite a few posts;

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

From what I understand, the VO of the car will have the info needed to code the module but my question is with ‘injecting the CAFD’. As it’s a replacement module the CAFD will be from the old car, so where does the CAFD I need to ‘inject’ actually come from – is this from data on board the car or does it come from within E-SYS (or is this why you need PSdZData?).

Basically – when I do this step…. Will the CAFD I need to select already be stored on the car or do I need to pull it from somewhere else and have it on my laptop? Or, as the JBE is from an identical MY car model, can I just code it without injecting a CAFD?

Thanks!!

[shawnsheridan]

Originally Posted by Matt_BX3

New member here.. appreciate some advice!

I’ve got a 2012 F25 X3. PDCs stopped working and after checking all wiring and sensors it seems the JBE module was at fault (ISTA seemed to agree).

So I now have a second hand replacement JBE module. Fitted to the car and it works, but features such as heated seats, auto wipe etc aren’t working. I assume this is because the car the JBE came from didn’t have these. ISTA is also telling me the module isn’t coded to the car.

My understanding is that I need to code the new module to the car, which I can do with E-SYS using the process Shawn has written in quite a few posts;

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

From what I understand, the VO of the car will have the info needed to code the module but my question is with ‘injecting the CAFD’. As it’s a replacement module the CAFD will be from the old car, so where does the CAFD I need to ‘inject’ actually come from – is this from data on board the car or does it come from within E-SYS (or is this why you need PSdZData?).

Basically – when I do this step…. Will the CAFD I need to select already be stored on the car or do I need to pull it from somewhere else and have it on my laptop? Or, as the JBE is from an identical MY car model, can I just code it without injecting a CAFD?

Thanks!!

CAFD comes from the psdzdata used with E-Sys.

[Matt_BX3]

Originally Posted by shawnsheridan

CAFD comes from the psdzdata used with E-Sys.

Ok makes sense. Thanks. I have E-Sys, is there a good link to get psdzdata?

Thanks

[shawnsheridan]

Originally Posted by Matt_BX3

Ok makes sense. Thanks. I have E-Sys, is there a good link to get psdzdata?

Thanks

PM sent.

[Jonnyt]

Hi Shawn, would it be possible to get a link to Esys for a 2019 G01 please?

Also, any guidance on the best way to enable/code Carplay would be much appreciated. Car does not have Carplay preperation 6CP, but I have fitted a wi-fi aerial. Head unit is running NBTEvo_Y.

Thank you.

[shawnsheridan]

Originally Posted by Jonnyt

Hi Shawn, would it be possible to get a link to Esys for a 2019 G01 please?

Also, any guidance on the best way to enable/code Carplay would be much appreciated. Car does not have Carplay preperation 6CP, but I have fitted a wi-fi aerial. Head unit is running NBTEvo_Y.

Thank you.

PM sent.