BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      06-16-2020, 12:22 PM   #2751
nihad
New Member
United Kingdom
8
Rep
14
Posts

Drives: BMW X3 2013
Join Date: Jun 2020
Location: London

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Are you using Read ECU not Read SVT?
Am really not sure
so this is what I have done

DOwnloaded and installed E-sys 3.27.1
then downloaded PSdZData_Lite_v4.21.32.7z
unzipped PSdZData_Lite_v4.21.32.7z then copy only folder mainseries to C:\Data\psdzdata
am I missing any steps above?

Thanks
Appreciate 0
      06-16-2020, 12:26 PM   #2752
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by nihad View Post
Am really not sure
so this is what I have done

DOwnloaded and installed E-sys 3.27.1
then downloaded PSdZData_Lite_v4.21.32.7z
unzipped PSdZData_Lite_v4.21.32.7z then copy only folder mainseries to C:\Data\psdzdata
am I missing any steps above?

Thanks
That's setup. I am asking about use. What are you doing to get the Error?

After connecting to car, are you using Read ECU or Read SVT?
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      06-17-2020, 02:50 AM   #2753
nihad
New Member
United Kingdom
8
Rep
14
Posts

Drives: BMW X3 2013
Join Date: Jun 2020
Location: London

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
That's setup. I am asking about use. What are you doing to get the Error?

After connecting to car, are you using Read ECU or Read SVT?
Thanks bro I managed to sort it, the issue was I didn't copy all the file from PSDzData to C drive
Once I copied all the file I didn't get the error anymore and managed to code the Bluetooth now I can play music thru Bluetooth.
Appreciate 0
      06-17-2020, 10:20 AM   #2754
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by nihad View Post
Thanks bro I managed to sort it, the issue was I didn't copy all the file from PSDzData to C drive
Once I copied all the file I didn't get the error anymore and managed to code the Bluetooth now I can play music thru Bluetooth.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      06-18-2020, 09:04 AM   #2755
najnad
General of the Space Forces
najnad's Avatar
United_States
171
Rep
721
Posts

Drives: 11 X3 35i M-sport
Join Date: May 2012
Location: Elkridge, MD

iTrader: (0)

Garage List
Ok, I got a Speed Limit Indicator (SLI) emulator and installed it and coded my 2011 X3 so that the SLI shows up both on the gauge cluster screen and the HUD. The only problem is that it says "km/h" instead of "m/h". The number is correct for m/h, just the label is wrong. The units everywhere else are miles, including the selection box in vehicle settings.

Where do I code so that the SLI label says m/h or mph? I am using bimmercode. thank you
__________________
Current: 2020 X5 x40i M-Sport, Arctic Grey Metallic / Ivory White, Executive Package, Luggage Compartment Package, Integral Active Steering, Tow Package, Parking Assist Package, Driving Assist Package, M-Sport brakes, Tux Mats
Appreciate 0
      06-18-2020, 10:26 AM   #2756
pungo
Colonel
pungo's Avatar
United_States
868
Rep
2,527
Posts

Drives: Z4MC-X3-35i-525i, Corrado G60
Join Date: Nov 2007
Location: MD

iTrader: (5)

Garage List
Quote:
Originally Posted by najnad View Post
Ok, I got a Speed Limit Indicator (SLI) emulator and installed it and coded my 2011 X3 so that the SLI shows up both on the gauge cluster screen and the HUD. The only problem is that it says "km/h" instead of "m/h". The number is correct for m/h, just the label is wrong. The units everywhere else are miles, including the selection box in vehicle settings.

Where do I code so that the SLI label says m/h or mph? I am using bimmercode. thank you
Do you have CIC or NBT?
Is the speed displayed in a circle or white box?
I thought the km/h or m/h was set within the emulator itself before being shipped.
Appreciate 0
      06-18-2020, 10:51 AM   #2757
najnad
General of the Space Forces
najnad's Avatar
United_States
171
Rep
721
Posts

Drives: 11 X3 35i M-sport
Join Date: May 2012
Location: Elkridge, MD

iTrader: (0)

Garage List
Quote:
Originally Posted by pungo View Post
Do you have CIC or NBT?
Is the speed displayed in a circle or white box?
I thought the km/h or m/h was set within the emulator itself before being shipped.
CIC, it is in a circle
__________________
Current: 2020 X5 x40i M-Sport, Arctic Grey Metallic / Ivory White, Executive Package, Luggage Compartment Package, Integral Active Steering, Tow Package, Parking Assist Package, Driving Assist Package, M-Sport brakes, Tux Mats
Appreciate 0
      06-18-2020, 02:40 PM   #2758
najnad
General of the Space Forces
najnad's Avatar
United_States
171
Rep
721
Posts

Drives: 11 X3 35i M-sport
Join Date: May 2012
Location: Elkridge, MD

iTrader: (0)

Garage List
Quote:
Originally Posted by najnad View Post
CIC, it is in a circle
here is a pic
Attached Images
 
__________________
Current: 2020 X5 x40i M-Sport, Arctic Grey Metallic / Ivory White, Executive Package, Luggage Compartment Package, Integral Active Steering, Tow Package, Parking Assist Package, Driving Assist Package, M-Sport brakes, Tux Mats
Appreciate 0
      06-20-2020, 05:39 AM   #2759
BEMVEU
Registered
United Kingdom
0
Rep
4
Posts

Drives: BMW X3 F25
Join Date: May 2019
Location: London

iTrader: (0)

Quote:
Originally Posted by April1 View Post
Coding made easy: Step by step instructions for Fxx Series

Coding is for people who want to play with the settings of BMW car software to achieve something more desirable. Coding is not really a programming; it is another name for re-configuring the software of your car. There are limited risks of messing up with your car SW but if you are careful, follow step by step instructions and know and understand what you are doing, it may be OK to go ahead. Never try to guess and do it, be absolutely sure for your steps, clarify your doubts before you proceed. There are experts on the forum who are willing to help you, don't hesitate to ask even a silliest question. Never-the-less, if you want to try new unknown settings which others have not tried, believe me, you are playing with fire.

READ THE INSTRUCTIONS VERY CAREFULLY.

What is needed for coding:
  1. ENET cable
  2. E-Sys software 3.26.1 with EST token and Pin
  3. psdzdata 54.2
  4. A dedicated laptop with Windows 7 with minimum 16 GB of free space
  5. Backup utility for CAF files (optional), file attached
  6. Useful Cheat Sheet for Fxx, file for F25 attached, others are available in different forums

Prepare your setup:

You can build your own cable or buy from a good source. Use shielded cables only. Cable should be reliable as interruption and electrical noise interference of any kind during coding could be very risky.

Delete unwanted SW and data from your laptop. It may be worthwhile to de-fragment your HD of laptop before installing the coding software as this software will occupy almost 12 GB to 44 GB of space on HD. Use the power adapter to keep batteries charged all the time as installation will take several minutes depending upon the performance of the laptop and data storage media.

Always try to clarify your doubts on forum as it also helps other readers, but you are welcome to contact me directly for any help if that boosts your confidence.

E-Sys Software installation:

Use the following procedure to install software on your laptop:
  1. Installation file for the E-Sys is an exe file whose name is like “E-Sys_Setup_3_24_3_RC_b38445.exe”
  2. Double click on this file and follow the instructions on the screen.
  3. Use default settings.
  4. Once the E-Sys is installed, it will create two folders on C: drive, namely Data and EC-Apps
  5. Copy your procured psdzdata folder and replace empty folder under “C:\Data\”
  6. It will create a desktop shortcut to start E-Sys

Setting up the EST token for E-Sys:
  1. Create a folder EST anywhere on C: drive. You can create under C:\Data and copy your token ( a *.est file)
  2. Launch E-Sys by double clicking its shortcut on desktop. It might take a minute to start, have patience.
  3. Select Options > Settings. Select EST tab.
  4. Click on the browse button with three dots ( … ) and navigate to EST folder C:\Data\EST
  5. Select file "******.est" and click OK to save the location and close the “Settings” window.

(If you have procured your token from an external source, follow additional supplied directions to complete token installation)

Preparation for coding:
  1. It's a good practice, though not a must, to shut off any wireless or Bluetooth service on the laptop. Let just laptop and car talk to each other with no external interference.
  2. As a precaution, disable any firewall on the laptop. I don't like even any anti-virus software as their behavior is not well known, and may interfere with the communication. It’s advisable to disable them.
  3. It is preferred to start with fully charged batteries of laptop and car as no interruption can be tolerated during transfer of data from laptop to Car. For long coding session, a car battery charger may be needed.
  4. Car audio and video drain off the battery fast, so better switch them off during coding.

Connect E-Sys to your Car:
  1. Connect ENET cable between car's OBD port and network port of laptop.
  2. Switch on the ignition of the car, don't start the engine.
  3. You will notice laptop tries to connect to the car. Wait a few minutes until the network icon on laptop shows a Connection with the yellow exclamation point over it. If you don’t see the network icon due to your laptop settings, wait for a minute.
  4. Start your E-Sys on your laptop.
  5. Press connect button on top row of E-Sys to connect car with the laptop.
  6. It opens up a dialog box.
  7. Select the correct TargetSelector for your model of the car, e.g. F025 and not F025_DIRECT for X3 model.
  8. Select "Connection via VIN" and press Connect.
  9. Wait for the Connection message. Click OK. If the connection was established successfully you see the selected target in the status bar at the bottom.

Full backup of Car's configuration files:

It's a good practice to take a full back up of Car's original settings before any changes are made to the car. These files could be used as reference in case it is desired to go back to original settings of any or all features.

Read and Save FA:
  1. Connect E-Sys to your car.
  2. Select "Expert Mode" on the left pane and click on "Coding" button therein. It will display 4 sections/Boxes on the right side.
  3. In Vehicle Order Box (upper left), click on "Read" button, it would display FA of your car under FA List.
  4. Select FA and click on “Save” button. Save as FA_original.
  5. Test button above will show the path of the saved FA file.

Read and Save SVT:
  1. Look at SVT Actual Box (right pane, midway down) and click on "Read SVT" button.
  2. SVT box on left will display SVT of different modules of your car.
  3. Click on the Save button on SVT Actual box and name the saved file as SVT_original.
  4. Text button above will display the path of the saved file.

Read and Save CAFD (ncd) files:
  1. Inside SVT box (left side), you see SVT, containing ECUs and each ECU contains files in expanded view.
  2. Notice that some of the CFD files will have green check marks. These green marked CAFD files are of our interest.
  3. Right click on first green marked CAFD and then press and hold control key on your laptop and click on all other similar marked CAFD files. This way all such CAFD files will be selected for further operation.
  4. Now move to right in “Coding” box and click on "Read Coding data". After codes are read, green icon will change into a folder icon and the files inside will contain the data read from your car.
  5. Check the folder "C:\Data\CAF”, this will contain all the read CAFD files.
  6. Copy and Save all the files in a safe place. These are your original CAFD files.
  7. Alternatively, you can use utility "Copy_CAF_v3.bat", copy it anywhere on your laptop and double click on it to automatically save the files under a Folder "C:\My_CAF_Files" with date and time stamp.

Reading current Integration Step (I-Step) of your car:

It’s good to know the current I-Step of your car as that decides the minimum version of psdzdata that can be used to code your car.
  1. Connect E-Sys to car following the steps given above.
  2. Select expert mode on the left pane and click on VCM button.
  3. On the right bottom box, select “Master” tab.
  4. In I-Steps box, click on “Read” button.
  5. Integration Steps boxes above will be populated with the data. Note down the I-Step (current).

Coding CAFD files:

CAFD files (ncd) contain the setting data/ parameters for each ECU. Modifying the values in these files change the behavior of ECUs.
  1. Connect E-Sys to car and follow the steps to read CAFD file/s to be coded. (You may take help of cheat files to decide which ECU you would like to code and which are the associated CAFD files).
  2. Expand the folder of the selected CAFD file. Right click on the CAFD file and click "Edit FDL". Enter the pin if asked.
  3. Open the module you wanted to edit under “Daten”, click on the Functionen folder, then open the ausgelessen folder of the selected function. It will show the current settings.
  4. Change them as per Cheat Sheet and Save.
  5. To be on the safer side, edit only one ECU at a time.
  6. After making all changes in the CAFD files of ECU as per the cheat sheet for that function, save and go back by pressing top extreme left green arrow "back" button.
  7. Now you can see FA again. Right click on it and "Activate FA". You will see a green active text next to FA. Also FP will open on the right side.
  8. Select the edited CAFD file on SVT box and Click on "Code FDL" in coding box on right.
  9. Coding process will start and should end with no errors.
  10. Take a backup of all the CAFD files again and save in a different folder. Best way is to use "Copy_CAF_v3.bat". Copy it anywhere on your laptop and just double click on it, all will be done for you and files will be saved under a new date time stamped folder.
  11. Great, you coded one module. Disconnect E-Sys by clicking on top Connect button which is showing a red x. You are done.
  12. Test the car for the changed feature. Some features require 15 -30 minutes to get activated where as some are instant and few need you to switch off the and lock the car and unlock and start.

Contact me in case you need any help.
Great work, April1.

Do you have, or do you plan writing something similar on flashing a ECU? I have retrofitted the Camera Assist (changed Windshield, installed camera + KAFAS2 ECU, changed blinker button with the split one for Drive Assist, changed the steering wheel stalks for High Beam Assist and added steering wheel controller and vibro). I ordered code from BMW and managed to change the VIN in the ECU, but now I cannot inject CAFW files into the ECU because I have E-Sys Light. Not sure how to proceed - sorry I am now to the forum and maybe this was answered already...

Kindly let me know if you can help.

Adrian
Appreciate 0
      06-20-2020, 09:01 AM   #2760
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by BEMVEU View Post
Great work, April1.

Do you have, or do you plan writing something similar on flashing a ECU? I have retrofitted the Camera Assist (changed Windshield, installed camera + KAFAS2 ECU, changed blinker button with the split one for Drive Assist, changed the steering wheel stalks for High Beam Assist and added steering wheel controller and vibro). I ordered code from BMW and managed to change the VIN in the ECU, but now I cannot inject CAFW files into the ECU because I have E-Sys Light. Not sure how to proceed - sorry I am now to the forum and maybe this was answered already...

Kindly let me know if you can help.

Adrian
April1 was last active 07-29-2015 07:32 PM. I would not expect a reply from him.

There is no such thing as "E-Sys Light", so I presume you mean PSdZData Light as opposed to PSdZData Full. For CAFD Injection, PSdZData Light is all that is needed. For flashing Full is needed.

Injecting CAFD (Detect CAF for SWE) and Flashing ECU's with >= v.4.17.20 PSdZData requires using newer E-Sys 3.30.0 or higher.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      06-20-2020, 09:13 AM   #2761
BEMVEU
Registered
United Kingdom
0
Rep
4
Posts

Drives: BMW X3 F25
Join Date: May 2019
Location: London

iTrader: (0)

Sorry about April1 - hope all is OK with him...
And Yes, Shawn - you are right, I meant PSdZData Light. The E-Sys version I have is 3.27.1 and the PSdZ Version is 5.01.02 (2015-08-12). So it looks I need:
1. Newer version of E-Sys, and
2. Full version PSdZ.
Would you be aware of any place I can acquire them? I tried several garages here in the UK, but no one seem to specialise in this type of job.
Thank you for replying - much appreciated
Appreciate 0
      06-20-2020, 09:48 AM   #2762
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by BEMVEU View Post
Sorry about April1 - hope all is OK with him...
And Yes, Shawn - you are right, I meant PSdZData Light. The E-Sys version I have is 3.27.1 and the PSdZ Version is 5.01.02 (2015-08-12). So it looks I need:
1. Newer version of E-Sys, and
2. Full version PSdZ.
Would you be aware of any place I can acquire them? I tried several garages here in the UK, but no one seem to specialise in this type of job.
Thank you for replying - much appreciated
PSdZ Version is 5.01.02 from E-Sys Application is not same thing as PSdZData version.

PM sent.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      07-05-2020, 02:40 AM   #2763
JAYJAYHIRST
Registered
0
Rep
1
Posts

Drives: f20 120d 184bhp
Join Date: Jul 2020
Location: leicester

iTrader: (0)

esys

sorry to jump on how do I download esys I got a yellow cable it came with 3 discs but all the discs was rejected saying they had trojans virus's any chance anyone could help
Appreciate 0
      07-05-2020, 10:58 AM   #2764
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by JAYJAYHIRST View Post
sorry to jump on how do I download esys I got a yellow cable it came with 3 discs but all the discs was rejected saying they had trojans virus's any chance anyone could help
PM sent.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-17-2020, 10:00 AM   #2765
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by dragosv6 View Post
Hi guys

i have a nbt evo and i flash it and now i don;t have the CAFD codding file anymore

If i select HU_NBT2 and click on "Detect CAF for SWE i get

I used Esys 3.30.1 with psdzdata 07.17

now i have psdzdata 07.20

should i select the cafd_00001ef6.caf.006_028_015 or cafd_00001ef6.caf.006_028_014

should i choose the psdzdata 07.17 or 07.20 to inject the CAFD?

after that what? Code? Read Coding Data and after Code FLD?

thanks!
Select the newest (bottom) CAFD.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-17-2020, 10:34 AM   #2766
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by dragosv6 View Post
Thanks Shawn

Now that i have id6 and carplay working, i don;t want to use the navigation anymore. Can i remove it from idrive? and also connected services?

Cheers!
I never tried, so I don.t know. If you don't want to use it, just don't use it. No need to remove it.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-17-2020, 10:41 AM   #2767
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by dragosv6 View Post
Oh yes and another thing if u know. now if i press on tel it opens the map and if i press the radio opens the com

i know that for id6 the i drive controller is different but i wonder if i can code the i drive controller buttons

thanks!
Try coding HU_NBT2 => ZBE_LAYOUT_NEW = nicht_aktiv.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-17-2020, 11:58 AM   #2768
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by dragosv6 View Post
Does anyone knows how many RAM i have in this unit?
Use Tool32 and Read it:

NBTEVO","status_lesen","ARG;STATUS_MEMORY_ USAGE" and look at:

STAT_MEMORYSPACE_RAM_KBYTE_WERT = x.xxxxxxE+006
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE

Last edited by shawnsheridan; 08-20-2020 at 07:59 AM..
Appreciate 0
      08-20-2020, 08:01 AM   #2769
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by dragosv6 View Post
Thanks Shawn!

Did the trick
RAM is 2,00XXX
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-23-2020, 07:51 AM   #2770
joffrey
Joachino
Belgium
0
Rep
11
Posts

Drives: F44 218I
Join Date: Nov 2018
Location: Belgique

iTrader: (0)

CARPLAY

Hello everyone, I am looking for someone in the group who could inform me or help me about the Carplay installation. Indeed would there be someone who has already performed this kind of manipulation on an NBT, NBT Evo? I already know + _ that it is necessary to patch an Fsc code for its VIN. But with which Programs or tools should you do it ???? Can someone help me on this? Thank you
Appreciate 0
      08-23-2020, 09:10 AM   #2771
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by joffrey View Post
Hello everyone, I am looking for someone in the group who could inform me or help me about the Carplay installation. Indeed would there be someone who has already performed this kind of manipulation on an NBT, NBT Evo? I already know + _ that it is necessary to patch an Fsc code for its VIN. But with which Programs or tools should you do it ???? Can someone help me on this? Thank you
NBT and NBT2 EVO ID4 do not support CarPlay. Must have NBT2 EVO ID5/6. PM sent.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-25-2020, 03:56 PM   #2772
TTGator
Banned
243
Rep
282
Posts

Drives: 2015 BMW M4 Dinan S3
Join Date: Oct 2013
Location: Kernersville, NC

iTrader: (0)

I found all of this to be really complicated when I first started trying to dig into it, and every video tutorial I have ever seen is very incomplete, awful, or both. So I made my own. Wanted to post it here to help folks that are learning E-Sys.

Appreciate 3
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:35 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST