[shawnsheridan]

Originally Posted by JD007

Can u send them 2 me 2,

Originally Posted by JD007

shawnsheridan please send me steps of how to activate carplay on NBT EVO

PM sent.

[MechWatch]

Hi all, Anyone successfully code in a different Oil Maintenance Indicator value in their F25? I've been able to VO code heated steering/seats and FDL code TPMS psi/temp display but no luck on Oil Life Index... It always resets to 8KA/19,000 miles. I've tried it several times, writing to the DME, KOMBI, & HU-CIC but no dice. When I read out the FA, 8KL is in there... Been going off F30/F10 coding guides - where else is this setting hiding?!?! TIA!

[JD007]

BMW standard tools. anyone?

[shawnsheridan]

Originally Posted by JD007

BMW standard tools. anyone?

PM sent.

[Przemek10]

Hi, I'm new here. Hello everyone. Can someone help me code the reversing camera? Everything is installed and ready for coding. The car is a G31. Thanks for your help.

[F25N20]

Originally Posted by Przemek10

Hi, I'm new here. Hello everyone. Can someone help me code the reversing camera? Everything is installed and ready for coding. The car is a G31. Thanks for your help.

You should just need to 3GA vo code BDC, ICAM2, HU, PMA, ACSM.

[Przemek10]

Thank you, I will try today 👍🏻

[GymMadPaulX3]

Hi Shawnsheridan

I'm looking at doing software updates on my 2013 X3 F25, current i-level is F025-12-07-08. ISTA+ is showing the target level as F025-21-03-520 and 57 actions to be performed.
Try to update but it says missing software entries SWE and also needed to add battery charger (can I use ctek mxs 5)

Do I need pszdata full or can it be done with lite version, apologies in advance it's my first bmw and I've just got my hands on e-net cable and k+dcan cables with ista+ and e-sys and thought I'd update as it's never been done.

Thank you Paul

[shawnsheridan]

Originally Posted by GymMadPaulX3

Hi Shawnsheridan

I'm looking at doing software updates on my 2013 X3 F25, current i-level is F025-12-07-08. ISTA+ is showing the target level as F025-21-03-520 and 57 actions to be performed.
Try to update but it says missing software entries SWE and also needed to add battery charger (can I use ctek mxs 5)

Do I need pszdata full or can it be done with lite version, apologies in advance it's my first bmw and I've just got my hands on e-net cable and k+dcan cables with ista+ and e-sys and thought I'd update as it's never been done.

Thank you Paul

Need PSdZData Full and a minimum 50 Amps Continuous Charger.

[GymMadPaulX3]

Originally Posted by shawnsheridan

Need PSdZData Full and a minimum 50 Amps Continuous Charger.

Thank you for the speedy reply and what I need to progress with the update. Will hunt round for the PsDZdata full file, would it be the latest one I need?

Thanks again Paul

[shawnsheridan]

Originally Posted by GymMadPaulX3

Thank you for the speedy reply and what I need to progress with the update. Will hunt round for the PsDZdata full file, would it be the latest one I need?

Thanks again Paul

PM sent.

[mistxx]

Hi all
I need to reset my headunit as I have a prolem with the blutooth devices menu just hanging in "Please wait..."

Would this eSys coding alow me to clear/master reset the headunit?... I've sued the software before (long time ago) and have the cable etc. I have eSys installed now but no idea about the token needed if someone is able t advise on both points.... my X3 (f25) hasn't had a software update since 2013 according to BMW support - they are recommending I take in for a software update, not sure that would solve my problem though

Any help would be much apprecisted

[shawnsheridan]

Originally Posted by mistxx

Hi all
I need to reset my headunit as I have a prolem with the blutooth devices menu just hanging in "Please wait..."

Would this eSys coding alow me to clear/master reset the headunit?... I've sued the software before (long time ago) and have the cable etc. I have eSys installed now but no idea about the token needed if someone is able t advise on both points.... my X3 (f25) hasn't had a software update since 2013 according to BMW support - they are recommending I take in for a software update, not sure that would solve my problem though

Any help would be much apprecisted

You can reset coding to factory coding using E-Sys by VO Coding Head Unit. No E-Sys Launcher nor Token needed for VO Coding.

[JD007]

Originally Posted by shawnsheridan

Need PSdZData Full and a minimum 50 Amps Continuous Charger.

shawnsheridan a cheap 50A charger u recommend?

[shawnsheridan]

Originally Posted by JD007

shawnsheridan a cheap 50A charger u recommend?

No idea on cheap ones. I have a Schumacher - INC-700A, and it was very expensive,

[Jolbex]

Search Alixprss 1200w 100a bmw charger. You get server psu transformed to powerful supply for some 100usd.

[JD007]

Originally Posted by shawnsheridan

No idea on cheap ones. I have a Schumacher - INC-700A, and it was very expensive,

Ok, I’ll have a look

[JD007]

Originally Posted by Jolbex

Search Alixprss 1200w 100a bmw charger. You get server psu transformed to powerful supply for some 100usd.

Hmmm, I didn’t consider Ali, ur correct maybe I’ll found something cheapo there