02-25-2024, 05:12 PM | #1 |
Registered
0
Rep 2
Posts |
BM3 Timing Correction - 91 Octane
Hey Guys,
Did some logging today on 3 different maps after I noticed some timing corrections. Any reason to be concerned here? 2020 X3M Base 17K Miles CTS Xpipe (Essentially a res delete) Dinan Drop In Filters - Charcoal filters removed All pulls done on 91 octane - BM3 OTS Stage 0+ LCI Map: Flashed and ran logs within 5 minutes https://www.bootmod3.net/log?id=65db...c9c9791cfaea67 https://www.bootmod3.net/log?id=65db...c9c9791cfae9a0 Stage 1 91 ACN Map: Flashed and did logs within 10 minutes https://www.bootmod3.net/log?id=65db...befb28ac8102bf https://www.bootmod3.net/log?id=65db...c9c9791cfae65f https://www.bootmod3.net/log?id=65db...c9c9791cfae5f7 https://www.bootmod3.net/log?id=65db...b72d567fe22c0c Stage 1 91 Map: This was the map I had been using for about a month. https://www.bootmod3.net/log?id=65db...c9c9791cfaaeca |
02-26-2024, 03:58 PM | #2 |
Registered
0
Rep 2
Posts |
Went and added 1 gallon of E85 that typically tests E80-E85
https://www.bootmod3.net/log?id=65dd...9d5436b30e9d74 https://www.bootmod3.net/log?id=65dd...e0325928d4cc21 Gas is pretty weak in Idaho if you're stuck on 91. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|