Bimmercode coding on G01 - Share you coding changes

G01Mike · 03-26-2019, 07:40 AM

Quote:

Originally Posted by marcati

Anyone know how to code the driver seat to automatically slide back on the rails when the driver door is opened? The feature must be in Expert mode, but no idea where.

I think previously in this thread I seen something like this was in esys but does not work on G01.....at least yet.

titomi · 03-26-2019, 08:48 AM

Quote:

Originally Posted by G01Mike

I think previously in this thread I seen something like this was in esys but does not work on G01.....at least yet.

afaik not applicable to G01.

gugin · 03-27-2019, 11:19 PM

Quote:

Originally Posted by Eclimax13

Can someone try to save sport displays to their favorites? For some reason mine won't save.

I have it saved as favorite #7. Go to Technology in action. Use the joystick to make Sport displays active. Press a favorite button for a few seconds. Do not actually go to the sport displays. If you see them on the screen, you have gone too far and they won't store in the favorite. You always want to store the item that activates the function you ultimately want a shortcut to.

marcati · 03-28-2019, 08:06 AM

Quote:

Originally Posted by titomi

Quote:

Originally Posted by G01Mike

I think previously in this thread I seen something like this was in esys but does not work on G01.....at least yet.

afaik not applicable to G01.

I have G02

MechX3M40i · 03-28-2019, 08:12 AM

Quote:

Originally Posted by marcati

Quote:

Originally Posted by titomi

Quote:

Originally Posted by G01Mike

I think previously in this thread I seen something like this was in esys but does not work on G01.....at least yet.

afaik not applicable to G01.

I have G02

It's safe for you to make the assumption that whatever works for G01 would probably work the same for G02, except the shape of the car plus a very few exceptions. As far as I know, these two cars are basically twins and share the majority of components.

Eclimax13 · 03-28-2019, 04:25 PM

Quote:

Originally Posted by gugin

I have it saved as favorite #7. Go to Technology in action. Use the joystick to make Sport displays active. Press a favorite button for a few seconds. Do not actually go to the sport displays. If you see them on the screen, you have gone too far and they won't store in the favorite. You always want to store the item that activates the function you ultimately want a shortcut to.

Thanks. I actually figured this one out by mistake yesterday. I was definitely going into the pages and trying to save them. Figuring out the proper way has allowed me to save a lot more than I thought I could.

A1723 · 03-28-2019, 08:08 PM

Is it possible to code back DRL on ?

teaston · 03-28-2019, 08:24 PM

Quote:

Originally Posted by A1723

Is it possible to code back DRL on ?

Unfortunately not.

SROC3 · 03-28-2019, 08:34 PM

Quote:

Originally Posted by teaston

Unfortunately not.

Yeah.....I hate it that we can't do this on out platform.....Grrrr. That would be so cool.

Lilliana · 03-29-2019, 06:48 AM

With Bimmercode does the back-up save everything or just what you did? , will have some coding done and will it be saved in case the dealer flashes the ecm?

way245 · 03-29-2019, 03:33 PM

Completely new to Bimmercode stuff...this doesn't ruin my warranty or anything does it? I won't be doing anything expert, just some basic stuff.

Nicklebon · 03-29-2019, 03:49 PM

Quote:

Originally Posted by Lilliana

With Bimmercode does the back-up save everything or just what you did? , will have some coding done and will it be saved in case the dealer flashes the ecm?

I asked this same question and was told that if the dealer changes the version of sofware/firmware then the backups from earlier versions should NOT be used. Being in the technology business this makes sense to me. So my advise would be to note your versions and if they don't change you'd be gtg to restore as the dealer just reset to default. If they do change you'll need to recode yourself or pay someone again.

marcati · 03-29-2019, 10:59 PM

Quote:

Originally Posted by MarkyM

If you have lane keep/change assistant and ACC you will have 2 extra buttons on steering wheel above and below the res button, if you have 2 blank buttons there you won't have it

Yup, definitely don't have it. Bummer :-(

marcati · 03-29-2019, 11:00 PM

Quote:

Originally Posted by Nicklebon

I asked this same question and was told that if the dealer changes the version of sofware/firmware then the backups from earlier versions should NOT be used. Being in the technology business this makes sense to me. So my advise would be to note your versions and if they don't change you'd be gtg to restore as the dealer just reset to default. If they do change you'll need to recode yourself or pay someone again.

I would second that (I also work in the tech sector). Restoring settings from an older OS could cause problems, but would need a BMW software expert to confirm exactly.

Almaretto · 03-30-2019, 01:23 AM

Quote:

Originally Posted by Nicklebon

I asked this same question and was told that if the dealer changes the version of sofware/firmware then the backups from earlier versions should NOT be used. Being in the technology business this makes sense to me. So my advise would be to note your versions and if they don't change you'd be gtg to restore as the dealer just reset to default. If they do change you'll need to recode yourself or pay someone again.

E-sys will not allow you to restore from older backup. Depending on how Bimmercode does it, I assume it would be similar.

808ron · 03-31-2019, 07:57 PM

Quote:

Originally Posted by Almaretto

E-sys will not allow you to restore from older backup. Depending on how Bimmercode does it, I assume it would be similar.

Can you code fogs on with parking lights. My old x3 could do it.

Almaretto · 03-31-2019, 10:02 PM

Quote:

Originally Posted by 808ron

Can you code fogs on with parking lights. My old x3 could do it.

Yes. And high beams.

DADINO · 04-01-2019, 04:25 PM

Hi Almaretto!
Any way to code for removing the speedlook on the on-line Mail?
Thx in advance,
Daniele

cvee · 04-01-2019, 05:31 PM

Quote:

Originally Posted by marcati

Yup, definitely don't have it. Bummer :-(

Don’t worry.. you’re not missing much.
The implementation is underwhelming. It constantly disconnects at the slightest problem.

Almaretto · 04-01-2019, 08:54 PM

Quote:

Originally Posted by DADINO

Hi Almaretto!
Any way to code for removing the speedlook on the on-line Mail?
Thx in advance,
Daniele

Not of which I know. You can add hardware mod that fools GPS.

KTMF · 04-02-2019, 12:52 PM

You can program whether you want alarm setting to chirp independently during lock and unlock.

In expert mode under roof function/alarm system, search for Entschaerfen.
It will be Akkustische Quittierung Entschaerfen (Acoustic acknowledgement unlocking). Aktiv = Chirp. Nicht Aktiv = silent

For chirp during locking, search for "Schaerfen". Akkustische Quittierung Schaerfen (Acoustic acknowledgement locking).

I set the chirp not active on unlocking, and left the locking as is (on during locking). This worked fine. Note that in the idrive under doors/key, the check box for acoustic signal for lock/unlock will be remain unchecked, even though it chirps on lock the way I have it set.

DADINO · 04-02-2019, 01:44 PM

Quote:

Originally Posted by Almaretto

Not of which I know. You can add hardware mod that fools GPS.

Ok, thx!

03-28-2019, 08:08 PM	#1217
A1723 Private First Class 26 Rep 121 Posts Drives: 2019 X3 3.0 xDrive, 2020 X4M Join Date: Feb 2016 Location: VA iTrader: (0)	Is it possible to code back DRL on ?
	Appreciate 0 Quote

03-29-2019, 06:48 AM	#1220
Lilliana New Member 2 Rep 25 Posts Drives: 2018 X3 Join Date: Jul 2018 Location: Wyoming iTrader: (0)	With Bimmercode does the back-up save everything or just what you did? , will have some coding done and will it be saved in case the dealer flashes the ecm?
	Appreciate 0 Quote

03-29-2019, 03:33 PM	#1221
way245 New Member 5 Rep 16 Posts Drives: 2019 X3 xDrive30i Join Date: Mar 2019 Location: SC iTrader: (0) Garage List 2019 BMW X3 [0.00]	Completely new to Bimmercode stuff...this doesn't ruin my warranty or anything does it? I won't be doing anything expert, just some basic stuff.
	Appreciate 0 Quote

04-01-2019, 04:25 PM	#1228
DADINO New Member 29 Rep 27 Posts Drives: X3 G01 25d M Sport Join Date: Jan 2019 Location: Italy iTrader: (0)	Hi Almaretto! Any way to code for removing the speedlook on the on-line Mail? Thx in advance, Daniele
	Appreciate 0 Quote

04-02-2019, 12:52 PM	#1231
KTMF Enlisted Member 21 Rep 37 Posts Drives: 2018 BMW X3 M40i Join Date: Aug 2017 Location: Northern California iTrader: (0)	Alarm Chirp while lock / unlock You can program whether you want alarm setting to chirp independently during lock and unlock. In expert mode under roof function/alarm system, search for Entschaerfen. It will be Akkustische Quittierung Entschaerfen (Acoustic acknowledgement unlocking). Aktiv = Chirp. Nicht Aktiv = silent For chirp during locking, search for "Schaerfen". Akkustische Quittierung Schaerfen (Acoustic acknowledgement locking). I set the chirp not active on unlocking, and left the locking as is (on during locking). This worked fine. Note that in the idrive under doors/key, the check box for acoustic signal for lock/unlock will be remain unchecked, even though it chirps on lock the way I have it set.
	Appreciate 0 Quote