[abhi234u]

Need to get my sunroof for 2011 BMW X3 28i programmed. It was showing on the scanner that it had some error and my mechanic accidentally cleared the codes. Can anyone guide me to a cheaper option? Thanks

[shawnsheridan]

Originally Posted by abhi234u

Need to get my sunroof for 2011 BMW X3 28i programmed. It was showing on the scanner that it had some error and my mechanic accidentally cleared the codes. Can anyone guide me to a cheaper option? Thanks

Program it with E-Sys. PM sent.

[ghostrider1969]

Hi
I've recently retrofitted comfort seats with lumbar, heating and memory and electric trunk on my F10 530dx (European version). Everything works fine, except for the seats heating. The check with BimmerLink gets the following errors:

00 Junction Box Electronics
1 error
030195: FH BFH: invalid characteristic, no standardization available

01 Crash Safety Module
1 error
930B8F: Passenger SBR sensor - interruption

02 Switch center, steering column
1 error
803407: Electric steering column adjustment (ELSV), cable to button: short circuit to positive or cable break

72 Footwell module
3 errors
800FA0: ELSV Hall sensor horizontal adjustment Short circuit to ground
800F9C: ELSV Hall sensor vertical adjustment Short circuit to ground
800E88: Inconsistency: HW coding and SW coding implausible

78 Integrated automatic heating / air conditioning system
6 errors
8011BB: Stratification potentiometer on the right: short circuit to plus or interruption
801253: eKMV: Power reduction in cooling or heating operation through power management
801222: Compressor: shutdown due to lack of DME approval
E70C25: AC-LIN-1: Motor in the rear left footwell does not respond, Bus Error Slave 8
E70C26: AC-LIN-1: Motor in the rear right footwell does not respond, Bus Error Slave 9
E70C29: AC-LIN-1: Motor stratification, rear left, does not respond, bus error slave 13

It must be said that the donor vehicle is F10 550ix Prod. Date 2010-11-10, equipped, inter alia, with S4NB Autom. Climate Control With 4-Zone. Mine was equipped with base seats and 2-Zone clima

1) I was wondering if you have solved the problem with the stearing column (error in orange)
2) the errors in green I think are related to the different configuration of clima: how can I solve with coding?
3) the error in purple is related to the different sensor type: the donor car was equipped with 3 wires type (bus, "+" and "-"), mine with 2 wire type (+ and -). I inserted the + and - of the donor car on the same pins occupied by my wires in the ACSM, but evidently it doesen't work. I read as alternative solution that I could code my passenger seat as M5, that doesn't have occupancy sensor, but I don't know how to do that;
4) the remaining errors I think are related with CAFD problems, but I don't know how to find the right CAFD's and inject them on the right ECUs

shawnsheridan can you help me please?

[Ddt1995]

Hello Shawn
Looking to code my G30 edc out. Can you help me out ?

[shawnsheridan]

Originally Posted by ghostrider1969

Hi
I've recently retrofitted comfort seats with lumbar, heating and memory and electric trunk on my F10 530dx (European version). Everything works fine, except for the seats heating. The check with BimmerLink gets the following errors:

00 Junction Box Electronics
1 error
030195: FH BFH: invalid characteristic, no standardization available

01 Crash Safety Module
1 error
930B8F: Passenger SBR sensor - interruption

02 Switch center, steering column
1 error
803407: Electric steering column adjustment (ELSV), cable to button: short circuit to positive or cable break

72 Footwell module
3 errors
800FA0: ELSV Hall sensor horizontal adjustment Short circuit to ground
800F9C: ELSV Hall sensor vertical adjustment Short circuit to ground
800E88: Inconsistency: HW coding and SW coding implausible

78 Integrated automatic heating / air conditioning system
6 errors
8011BB: Stratification potentiometer on the right: short circuit to plus or interruption
801253: eKMV: Power reduction in cooling or heating operation through power management
801222: Compressor: shutdown due to lack of DME approval
E70C25: AC-LIN-1: Motor in the rear left footwell does not respond, Bus Error Slave 8
E70C26: AC-LIN-1: Motor in the rear right footwell does not respond, Bus Error Slave 9
E70C29: AC-LIN-1: Motor stratification, rear left, does not respond, bus error slave 13

It must be said that the donor vehicle is F10 550ix Prod. Date 2010-11-10, equipped, inter alia, with S4NB Autom. Climate Control With 4-Zone. Mine was equipped with base seats and 2-Zone clima

1) I was wondering if you have solved the problem with the stearing column (error in orange)
2) the errors in green I think are related to the different configuration of clima: how can I solve with coding?
3) the error in purple is related to the different sensor type: the donor car was equipped with 3 wires type (bus, "+" and "-"), mine with 2 wire type (+ and -). I inserted the + and - of the donor car on the same pins occupied by my wires in the ACSM, but evidently it doesen't work. I read as alternative solution that I could code my passenger seat as M5, that doesn't have occupancy sensor, but I don't know how to do that;
4) the remaining errors I think are related with CAFD problems, but I don't know how to find the right CAFD's and inject them on the right ECUs

shawnsheridan can you help me please?

Sorry, I have never made this seat retrofit. I have no idea on this.

[shawnsheridan]

Originally Posted by Ddt1995

Hello Shawn
Looking to code my G30 edc out. Can you help me out ?

PM sent.

[JD007]

2017 x3 sdrive need to code PMA module, latest ista+ link

[shawnsheridan]

Originally Posted by JD007

2017 x3 sdrive need to code PMA module, latest ista+ link

ISTA+ is Diagnosis and Programming, not Coding. What exactly are you needing to do and why?

[JD007]

Well the PMA module was damage, so I buy one, and ista is saying that is has to be coded to the car

[JD007]

By the way I have ista 4.32, but only the diagnostic part, the programming part I didn’t install it because I have little space in HD, now I have a lot, but don’t have the complete ista+, I consulted with a BMW Mecanic, and he confirms me that it has to be coded or programmed to the car

[shawnsheridan]

Originally Posted by JD007

Well the PMA module was damage, so I buy one, and ista is saying that is has to be coded to the car

Originally Posted by JD007

By the way I have ista 4.32, but only the diagnostic part, the programming part I didn’t install it because I have little space in HD, now I have a lot, but don’t have the complete ista+, I consulted with a BMW Mecanic, and he confirms me that it has to be coded or programmed to the car

So use E-Sys. PM sent.

[JD007]

Thanx shawnsheridan

[JD007]

shawnsheridan could you send latest ista+, too, please

[shawnsheridan]

Originally Posted by JD007

shawnsheridan could you send latest ista+, too, please

PM sent.

[JD007]

thanx

[aatorquepoint]

Originally Posted by shawnsheridan

PM sent.

Hello Shawn, could you please send me steps of how to activate carplay on NBT EVO and also how to update map from Japan to Europe? I have esys plus.

Thanks

[Jolbex]

Originally Posted by JD007

shawnsheridan could you send latest ista+, too, please

Same humble request, Sir.

[shawnsheridan]

Originally Posted by aatorquepoint

Hello Shawn, could you please send me steps of how to activate carplay on NBT EVO and also how to update map from Japan to Europe? I have esys plus.

Thanks

Originally Posted by Jolbex

Same humble request, Sir.

PM's sent.

[Jolbex]

Many thanks!!

[F25N20]

Wondering if I could get some expert help here. I installed a set of f01 comfort seats, everything was working all adjustment and heated seats but I had a c95409 code. I was told i needed to code the drivers sm. After doing that now the seat won't move the lumbar still works but i can't do any other adjustment. I tried adding 456 to the fa list but it wont allow me as a window come up with this.

Not all elements of the fa were found in the fa2fp: Salapa 456

On the bright side i did adjust the seat where I wanted before I coded the thing.

Never mind i found all the line in the by fld coding to get it to work.

[JD007]

Originally Posted by aatorquepoint

Hello Shawn, could you please send me steps of how to activate carplay on NBT EVO and also how to update map from Japan to Europe? I have esys plus.

Thanks

Can u send them 2 me 2,

[JD007]

shawnsheridan please send me steps of how to activate carplay on NBT EVO