[MrBeele]

Hi,

Could someone send me a link for esys 3.38.2 or later and the PSZDATA files for an LCI iX3? For use with bimmerutility.

Thx in advance.

Kr.

[shawnsheridan]

Originally Posted by MrBeele

Hi,

Could someone send me a link for esys 3.38.2 or later and the PSZDATA files for an LCI iX3? For use with bimmerutility.

Thx in advance.

Kr.

PM sent.

[alefel]

Hi shawnsheridan I’m also in an ix3 LCI 2022 and would love a download link to latest pszdata and esys, possible to send me?

[shawnsheridan]

Originally Posted by alefel

Hi shawnsheridan I’m also in an ix3 LCI 2022 and would love a download link to latest pszdata and esys, possible to send me?

PM sent.

[Aschne23]

Hi shawnsheridan

I would also need a download link to latest pszdata and esys.
Is it possible to send me?

Happy new year and thank you in advance!

[shawnsheridan]

Originally Posted by Aschne23

Hi shawnsheridan

I would also need a download link to latest pszdata and esys.
Is it possible to send me?

Happy new year and thank you in advance!

PM sent.

[ahusar92]

Hey, can you share with me the latest esys (including launcher) + pszdata? Cheers!

[shawnsheridan]

Originally Posted by ahusar92

Hey, can you share with me the latest esys (including launcher) + pszdata? Cheers!

PM sent.

[Matt_BX3]

New member here.. appreciate some advice!

I’ve got a 2012 F25 X3. PDCs stopped working and after checking all wiring and sensors it seems the JBE module was at fault (ISTA seemed to agree).

So I now have a second hand replacement JBE module. Fitted to the car and it works, but features such as heated seats, auto wipe etc aren’t working. I assume this is because the car the JBE came from didn’t have these. ISTA is also telling me the module isn’t coded to the car.

My understanding is that I need to code the new module to the car, which I can do with E-SYS using the process Shawn has written in quite a few posts;

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

From what I understand, the VO of the car will have the info needed to code the module but my question is with ‘injecting the CAFD’. As it’s a replacement module the CAFD will be from the old car, so where does the CAFD I need to ‘inject’ actually come from – is this from data on board the car or does it come from within E-SYS (or is this why you need PSdZData?).

Basically – when I do this step…. Will the CAFD I need to select already be stored on the car or do I need to pull it from somewhere else and have it on my laptop? Or, as the JBE is from an identical MY car model, can I just code it without injecting a CAFD?

Thanks!!

[shawnsheridan]

Originally Posted by Matt_BX3

New member here.. appreciate some advice!

I’ve got a 2012 F25 X3. PDCs stopped working and after checking all wiring and sensors it seems the JBE module was at fault (ISTA seemed to agree).

So I now have a second hand replacement JBE module. Fitted to the car and it works, but features such as heated seats, auto wipe etc aren’t working. I assume this is because the car the JBE came from didn’t have these. ISTA is also telling me the module isn’t coded to the car.

My understanding is that I need to code the new module to the car, which I can do with E-SYS using the process Shawn has written in quite a few posts;

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

From what I understand, the VO of the car will have the info needed to code the module but my question is with ‘injecting the CAFD’. As it’s a replacement module the CAFD will be from the old car, so where does the CAFD I need to ‘inject’ actually come from – is this from data on board the car or does it come from within E-SYS (or is this why you need PSdZData?).

Basically – when I do this step…. Will the CAFD I need to select already be stored on the car or do I need to pull it from somewhere else and have it on my laptop? Or, as the JBE is from an identical MY car model, can I just code it without injecting a CAFD?

Thanks!!

CAFD comes from the psdzdata used with E-Sys.

[Matt_BX3]

Originally Posted by shawnsheridan

CAFD comes from the psdzdata used with E-Sys.

Ok makes sense. Thanks. I have E-Sys, is there a good link to get psdzdata?

Thanks

[shawnsheridan]

Originally Posted by Matt_BX3

Ok makes sense. Thanks. I have E-Sys, is there a good link to get psdzdata?

Thanks

PM sent.

[Jonnyt]

Hi Shawn, would it be possible to get a link to Esys for a 2019 G01 please?

Also, any guidance on the best way to enable/code Carplay would be much appreciated. Car does not have Carplay preperation 6CP, but I have fitted a wi-fi aerial. Head unit is running NBTEvo_Y.

Thank you.

[shawnsheridan]

Originally Posted by Jonnyt

Hi Shawn, would it be possible to get a link to Esys for a 2019 G01 please?

Also, any guidance on the best way to enable/code Carplay would be much appreciated. Car does not have Carplay preperation 6CP, but I have fitted a wi-fi aerial. Head unit is running NBTEvo_Y.

Thank you.

PM sent.

[Bmw_Novice2]

Hi,
I am using Tool32 for a Cic Combox retrofit.
Im trying to exchange the vin number registered on new headunit by my car vin.

I could connect Tool32 to the car by Enet cable.

now I am able to load menu Cicr.prg and two other files.
when I load them on tool32, I am able to see aif_Lesen and the other one aif_schreiben.

in aif_schreiben ther is 9 arguments that I must open them in aif_lesen Tab one by one and make the string

but when the text file is opened does not show the code, and instead shows an error job status saying: "ERROR_ECU_SERVICE_NOT_SUPPORTED"
I am uploading pictures to make it clear

https://ibb.co/6BjNMtP
https://ibb.co/02nZCXQ
https://ibb.co/mH68S36

please share your ideas

[supersmink]

Hi, newbie here just getting started with coding - doe anyone have a link to download E-Sys for my '16 F25?

[shawnsheridan]

Originally Posted by supersmink

Hi, newbie here just getting started with coding - doe anyone have a link to download E-Sys for my '16 F25?

PM sent.

[StogyBear]

can you PM me the download links as well please?

[shawnsheridan]

Originally Posted by StogyBear

can you PM me the download links as well please?

PM sent.

[Juduka]

Hi,

I'm new to programming ad coding bmw;s so would you mind sharing the link? i have an f31 wich needs an new steering rack coded. i have Esys 3.28.1
But i have a problem with the calculation of KIS/SVT Target.

[shawnsheridan]

Originally Posted by Juduka

Hi,

I'm new to programming ad coding bmw;s so would you mind sharing the link? i have an f31 wich needs an new steering rack coded. i have Esys 3.28.1
But i have a problem with the calculation of KIS/SVT Target.

PM sent.

[GabrieI]

Hello, i read the forum since last year when i bought my first BMW and i did a lot of mods, thanks to all infos i found here.
Now i'm looking to add SLI and after i added 8TH in VO, i have the 3 lines on the dash and on HUD, so i have to inject the FSC code. Is anyone here who know a good source where i can buy an original FSC code please?
Thank you in advance