Coding made Easy: A step by step procedure

shawnsheridan · 04-18-2019, 08:15 AM

Quote:

Originally Posted by CoffeeLife

Region Change from US to Korea

NBT EVO2

Hopefully the proper FSC code for my VIN. It was purchased online to do the region change from US to Korea

Region Change in EVO, particularly from non-Asia to Asian Spec is quite difficult. It cant simply be done by coding it.

DiGiPiMP · 04-21-2019, 08:58 PM

Shawn,
What's the latest E-sys and PZD for 2017 X3 F25 xDrive2.8i N20?
Thanks,

shawnsheridan · 04-21-2019, 09:29 PM

Quote:

Originally Posted by DiGiPiMP

Shawn,
What's the latest E-sys and PZD for 2017 X3 F25 xDrive2.8i N20?
Thanks,

PM sent.

shadowspawn1201 · 04-29-2019, 11:36 PM

Can anyone tell me how to code SiriusXm Sat radio on F30 with Esys?

shawnsheridan · 04-30-2019, 12:31 AM

Quote:

Originally Posted by shadowspawn1201

Can anyone tell me how to code SiriusXm Sat radio on F30 with Esys?

You need 6F FSC Code before it can be coded.

SmittyX · 05-01-2019, 10:31 AM

My F25 (2013/X3) seems unable to code auto stop/start due to an issue with the CAS module.

At least, I get "Error while reading coding data" in Bimmercode, which the dev says is "coding data signature is off for some reason."

Using Carista I can see:
Car access system (CAS)
Bootloader: 0000074B
CAFD: 0000000F (5.24.233)
Date when last coded: 2099-99-99
Odometer when last coded: 0 km / 0 mi
[No fault codes]

Odd, but it is not the only module with that bogus date, also Power Steering and Fuel Pump have 2099.

So... any chance I would be able to overcome this using Esys or another coding app? Any other ideas on how to resolve this "coding data signature" error? Should I back out my NAV/FSC hack or MX/TX update?

kkh27 · 05-03-2019, 12:42 PM

Can anyone advice me where to get a modified F10 VO for coding 6WB to X3 F25? Thanks a lot.

Regards,

Koh

Almaretto · 05-04-2019, 01:57 AM

Quote:

Originally Posted by kkh27

Can anyone advice me where to get a modified F10 VO for coding 6WB to X3 F25? Thanks a lot.

Regards,

Koh

FA Editor will modify.

SmittyX · 05-11-2019, 12:24 AM

Quote:

Originally Posted by SmittyX

My F25 (2013/X3) seems unable to code auto stop/start due to an issue with the CAS module.

At least, I get "Error while reading coding data" in Bimmercode, which the dev says is "coding data signature is off for some reason."

Using Carista I can see:
Car access system (CAS)
Bootloader: 0000074B
CAFD: 0000000F (5.24.233)
Date when last coded: 2099-99-99
Odometer when last coded: 0 km / 0 mi
[No fault codes]

Odd, but it is not the only module with that bogus date, also Power Steering and Fuel Pump have 2099.

So... any chance I would be able to overcome this using Esys or another coding app? Any other ideas on how to resolve this "coding data signature" error? Should I back out my NAV/FSC hack or MX/TX update?

Note: I fixed this by E-Sys recoding the CAS ECU with next istep CAFD file, in case anyone else has this issue.

thushy · 05-29-2019, 07:50 AM

i have x3 f25 2011 xdrive2d, could you plz send me the instruction as well, thanks

shawnsheridan · 05-29-2019, 08:44 AM

Quote:

Originally Posted by thushy

i have x3 f25 2011 xdrive2d, could you plz send me the instruction as well, thanks

PM sent.

thushy · 05-29-2019, 03:36 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

x3sm · 05-29-2019, 07:24 PM

Can someone please figure out how you can code the steering wheel to start in sport mode always. It's much better feel and should have been like that stock.

luisavila · 05-31-2019, 12:47 AM

Would very much appreciate getting the instructions as well. Thanks!

shawnsheridan · 05-31-2019, 08:12 AM

Quote:

Originally Posted by luisavila

Would very much appreciate getting the instructions as well. Thanks!

PM sent.

Dronitoni · 05-31-2019, 02:41 PM

Is it possible to activate the Auto-Hold function permanently?

Almaretto · 05-31-2019, 06:43 PM

Quote:

Originally Posted by Dronitoni

Is it possible to activate the Auto-Hold function permanently?

Not with any coding that I have seen. You want to enable it after pulling out of parking spot and disable when parking.

Dronitoni · 06-01-2019, 06:38 AM

Quote:

Originally Posted by Almaretto

Not with any coding that I have seen. You want to enable it after pulling out of parking spot and disable when parking.

Yes that's the idea.
I had this feature in an other car, which is sold in the meantime.
(it was not a BMW).

Is there anyone who can provide the link to coding software?
Would be highly appreciated.

Almaretto · 06-01-2019, 02:36 PM

Quote:

Originally Posted by Dronitoni

Yes that's the idea.
I had this feature in an other car, which is sold in the meantime.
(it was not a BMW).

Is there anyone who can provide the link to coding software?
Would be highly appreciated.

That is the way Volvo's behave and I end up disabling each time on start until ready to use.

https://www.bimmerfest.com/forums/sh...d.php?t=983244

Foxtrot_Fünfundzwanzig · 06-07-2019, 07:07 AM

Hello all

I have a 2016 F25... will you please send me the current link for the software? Also, any advice regarding the Euro light switch install and functionality would be great :-)

Thanks in advance!

shawnsheridan · 06-07-2019, 08:13 AM

Quote:

Originally Posted by Foxtrot_Fünfundzwanzig

Hello all

I have a 2016 F25... will you please send me the current link for the software? Also, any advice regarding the Euro light switch install and functionality would be great :-)

Thanks in advance!

PM sent.

Foxtrot_Fünfundzwanzig · 06-07-2019, 08:16 AM

Thank you Shawn!

04-21-2019, 08:58 PM	#2554
DiGiPiMP Registered 0 Rep 2 Posts Drives: 2017 BMX X3 xDrive28i Join Date: Apr 2019 Location: Bulrington, MA iTrader: (0)	Shawn, What's the latest E-sys and PZD for 2017 X3 F25 xDrive2.8i N20? Thanks,
	Appreciate 0 Quote

04-29-2019, 11:36 PM	#2556
shadowspawn1201 New Member 0 Rep 7 Posts Drives: 2016 BMW 328i XDrive Join Date: Feb 2019 Location: Atlanta, GA iTrader: (0)	Can anyone tell me how to code SiriusXm Sat radio on F30 with Esys?
	Appreciate 0 Quote

05-01-2019, 10:31 AM	#2558
SmittyX Registered 0 Rep 3 Posts Drives: 2013 BMW X3 xDrive28i Join Date: Apr 2019 Location: Dallas iTrader: (0)	CAS coding inaccessible My F25 (2013/X3) seems unable to code auto stop/start due to an issue with the CAS module. At least, I get "Error while reading coding data" in Bimmercode, which the dev says is "coding data signature is off for some reason." Using Carista I can see: Car access system (CAS) Bootloader: 0000074B CAFD: 0000000F (5.24.233) Date when last coded: 2099-99-99 Odometer when last coded: 0 km / 0 mi [No fault codes] Odd, but it is not the only module with that bogus date, also Power Steering and Fuel Pump have 2099. So... any chance I would be able to overcome this using Esys or another coding app? Any other ideas on how to resolve this "coding data signature" error? Should I back out my NAV/FSC hack or MX/TX update?
	Appreciate 0 Quote

05-03-2019, 12:42 PM	#2559
kkh27 New Member 9 Rep 16 Posts Drives: BMW X3 F25 xDrive 35i 2012 Join Date: Apr 2019 Location: Singapore iTrader: (0)	Can anyone advice me where to get a modified F10 VO for coding 6WB to X3 F25? Thanks a lot. Regards, Koh
	Appreciate 0 Quote

05-29-2019, 07:50 AM	#2562
thushy Registered 0 Rep 2 Posts Drives: BMX x3 F25 2011 Xdrive2d Join Date: May 2019 Location: norway iTrader: (0)	i have x3 f25 2011 xdrive2d, could you plz send me the instruction as well, thanks
	Appreciate 0 Quote

05-29-2019, 07:24 PM	#2565
x3sm Captain 311 Rep 758 Posts Drives: M3 E93 Porsche Join Date: May 2018 Location: Ashville iTrader: (0)	Can someone please figure out how you can code the steering wheel to start in sport mode always. It's much better feel and should have been like that stock. __________________ M3 E93 PORSCHE MACAN S: SOLD BMW X3 F25: SOLD AUDI S4: SOLD BMW E92 335: SOLD
	Appreciate 0 Quote

05-31-2019, 12:47 AM	#2566
luisavila New Member 1 Rep 25 Posts Drives: X3 F25 Join Date: Aug 2017 Location: Chile iTrader: (0)	Would very much appreciate getting the instructions as well. Thanks!
	Appreciate 0 Quote

05-31-2019, 02:41 PM	#2568
Dronitoni Registered 0 Rep 2 Posts Drives: F 26 Join Date: May 2019 Location: Bavaria iTrader: (0)	Is it possible to activate the Auto-Hold function permanently?
	Appreciate 0 Quote

06-07-2019, 07:07 AM	#2572
Foxtrot_Fünfundzwanzig Registered 0 Rep 4 Posts Drives: 2016 X3 xDrive 28i M Sport Join Date: Jul 2015 Location: APO AE iTrader: (0)	Hello all I have a 2016 F25... will you please send me the current link for the software? Also, any advice regarding the Euro light switch install and functionality would be great :-) Thanks in advance!
	Appreciate 0 Quote

06-07-2019, 08:16 AM	#2574
Foxtrot_Fünfundzwanzig Registered 0 Rep 4 Posts Drives: 2016 X3 xDrive 28i M Sport Join Date: Jul 2015 Location: APO AE iTrader: (0)	Thank you Shawn!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search