[aspame82]

Dear Almaretto
Today i downloaded all the esys files 3.28 and PL 2.8 and psdzdata 4.13 i did the coding to show the speed in km/h but i got an error indicating i have to take the car to the dealer inmediately and the date and time does not appear.
Can you please help me?

[aspame82]

Originally Posted by OnerDriver

Did you turn the car off and on again? (Not kidding)

Yes, it worked I realized when I came back to check again. Thanks.

I tried to make coding for the HU Entry Nav [63] to show the sport Display (torque and power). I have problems reading the coding data I got this message:
CAFD_00000DED_003_015_039 Fehler:
NCD read from ECU "ECUid:HU_ENTRYNAV_0x63" for CAF "cafd_00000ded-003_015_039" code: TIMEOUT P2/T2 ocurred
description: p2 timeout on service RDBI_PLAIN has error in result...
Severity: error
[2130765072]

I check in the psdzdata and the CAFD file is there. I used the PSDZ data that Amaretto uploaded today.



Can you help me please?

[aspame82]

Originally Posted by OnerDriver

I'm glad it worked!

Thank you very much



Please report back!

unfortunately it did not work I got the same message:

Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I have checke the CAFD file CAFD_00000DED_003_015_039 in the PSDZdata folder and it exists. I do not know what can be happening

[aspame82]

Hi Experts, A long time ago I saw a post about coding the driving style memory.
for instance for cases where the old driver have an agressive style and yours isnt.
Can you please help me to set this memory so the system can relearn your driving style.
thanks in advance

[Almaretto]

Originally Posted by aspame82

unfortunately it did not work I got the same message:

Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I have checke the CAFD file CAFD_00000DED_003_015_039 in the PSDZdata folder and it exists. I do not know what can be happening

Not found [C012] is when you do not have matching cafd.

That error has to do with communication, invalid FA, or invalid fdl coding.

[aspame82]

Originally Posted by Almaretto

Not found [C012] is when you do not have matching cafd.

That error has to do with communication, invalid FA, or invalid fdl coding.

Dear Almaretto
I was able to read coding data for CAS and FRM and I could make coding for both.However, It didnt read the HU_Entry nav Therefore I didnt make any coding.
Btw I used the last PSDzdata you uploaded.

What else can I do?
Thanks in advance for your help.

[Almaretto]

Originally Posted by aspame82

Dear Almaretto
I was able to read coding data for CAS and FRM and I could make coding for both.However, It didnt read the HU_Entry nav Therefore I didnt make any coding.
Btw I used the last PSDzdata you uploaded.

What else can I do?
Thanks in advance for your help.

When you mean it did not read HU_Entry, you mean you got a "not found [C012]" error? What is full cafd name?

[mike_MAN]

This is EXCELLENT! Make this a sticky!

[94vtirozguy]

i just have to get myself a cable, as there are a few functions i would like to code as default.

1) retract side mirrors, remote for tailgate, eco mode, and do not turn off engine.

[aspame82]

Originally Posted by Almaretto

When you mean it did not read HU_Entry, you mean you got a "not found [C012]" error? What is full cafd name?

Dear Almaretto
I just copied the error message here below:

CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I think the CAFD file is: CAFD_00000DED_003_015_039
I checked the PSDZdata and the CAFD file is there:
cafd_00000ded.caf.003_015_039

One more thing. When I did the first coding sesion the system asked me to set time and date and the kilometers of the trip info sere set to zero. Also it appeared a message to take the car to the dealer. This message disappeared after setting time and date and to turn off the car. I noticed that the fuel compsumtion has turned high (according to cluster info 5km/l instead of 8-9 km/l that I got before coding).

Thanks in advance

[aspame82]

Originally Posted by OnerDriver

Are you selecting the available ECU (the one with the green check mark)?

Of course. I selected the one with the green mark.

[Almaretto]

Originally Posted by aspame82

Dear Almaretto
I just copied the error message here below:

CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I think the CAFD file is: CAFD_00000DED_003_015_039
I checked the PSDZdata and the CAFD file is there:
cafd_00000ded.caf.003_015_039

One more thing. When I did the first coding sesion the system asked me to set time and date and the kilometers of the trip info sere set to zero. Also it appeared a message to take the car to the dealer. This message disappeared after setting time and date and to turn off the car. I noticed that the fuel compsumtion has turned high (according to cluster info 5km/l instead of 8-9 km/l that I got before coding).

Thanks in advance

That is not a PSdzdata error. That is a communication or configuration error.

Is engine running?
What Launcher Chassis and E-sys Connection target are you using?

https://www.bimmerfest.com/forums/sh...d.php?t=983245
- See normal behavior.

[aspame82]

Originally Posted by Almaretto

That is not a PSdzdata error. That is a communication or configuration error.

Is engine running?
No. I did the process without engine running ( i thought it should be correct).
After checking your link below i realized I did not follow the correct procedure.

What Launcher Chassis and E-sys Connection target are you using?

F025 for. BMW x3 f25

https://www.bimmerfest.com/forums/sh...d.php?t=983245
- See normal behavior.

I think I have partially sorted out the problem:

I followed a procedure ( i think it is yours Almaretto) of generating CAFD files from original FA and SVT
Using my backup files (the ones i had before making any coding).
So I used the CAFD for the HU_Entry Nav (using new FDL).
I was able to access to the HU cadf files ( it was not possible before) and I did the coding I wanted ( sport display). After changing the parameters i did FDL coding and I got a warning but it worked.

important to mention that when i read the SVT data the ECU HUEntryNav is not shown but I can change the FDL parameters using the backup SVT.
Do you know what procedure should i follow to see the HUEntryNav ECU again?

Thank tou very much for your support.

[Almaretto]

Originally Posted by aspame82

important to mention that when i read the SVT data the ECU HUEntryNav is not shown but I can change the FDL parameters using the backup SVT.
Do you know what procedure should i follow to see the HUEntryNav ECU again?

Thank tou very much for your support.

SVT is a list of ECU's with their firmware version. You cannot Edit parameters with it, so I do not follow.

Make sure engine is running and try Read ECU. Engine maintains battery voltage to avoid shutdown and corruption.

[aspame82]

Originally Posted by Almaretto

SVT is a list of ECU's with their firmware version. You cannot Edit parameters with it, so I do not follow.

I mean I have the SVT list of ECUs
I choose the one corresponding to HUentryNav
I go to the corresponding CAFD file (green color)
Right click —> New —> i choose the original CAFD file i got (from FA and SVT backupdata)
Then it is expanded the CAFD file
Read coding data and FDL editor: and i change the parameters to show sport display.
then I did the normal CODE FDL

And that is it



Make sure engine is running and try Read ECU. Engine maintains battery voltage to avoid shutdown and corruption.

I will try this tomorrow

Thank you very much

[aspame82]

Hi experts, regarding the BMW X3 28i Xdrive (F25) 2017. Do you know what is the part number for the 6WB digital cluster?
I want to make this retrofit.

[94vtirozguy]

finally got my cable, however i noticed in thread you need windows 7. The only laptop i have is XP. Is there a way around this without having to update laptop to windows 7 ?

[Almaretto]

Originally Posted by 94vtirozguy

finally got my cable, however i noticed in thread you need windows 7. The only laptop i have is XP. Is there a way around this without having to update laptop to windows 7 ?

Allegedly (According to release notes), Windows XP support was added back in starting in Launcher 2.7.0. But, have never tried it as I do not have any XP systems left.

See if you can install E-sys and Launcher.

[outubro]

Originally Posted by shawnsheridan

No Coding. What do you mean by "Code" though? I only know of the Radio ID needed to activate account. is this same thing?

good night

can help me with the encoding of a new TMS for f11 BMW
Thanks

[shawnsheridan]

Originally Posted by outubro

good night

can help me with the encoding of a new TMS for f11 BMW
Thanks

I assume TMS replaces an existing TMS, in which case install TMS, Read and Activate FA, and VO Code TMS Module.

[94vtirozguy]

ok for people trying to get a Windows XP native PC installation up and running it is impossible. Even though 2.8.2 now supports "supports XP", it requires .NET 4.6.1, and won't install unless .NET version is done. However when you go to install .NET 4.6.1 or any later version it does a check, which blocks you from installing.

If you try to install any previous 2.8 version, it wont install on XP.

Onto a windows 7 install which i hope i can get working.

[94vtirozguy]

ok finally got to coding today. Have done all the basics (backed up all files at each step as per Aprils information)

However i would like the coding information for the following:

1) driving lights to be on when headlights are on (low beam high beam or angel eyes)
2) default the car into eco mode