07-19-2018, 10:45 PM | #2421 | |
Major General
2376
Rep 8,364
Posts |
Quote:
BDC_BODY is in I001, I012, F015, and G-series F10 and F25 share Cheat Sheets. Both cannot enable door handle lights. |
|
Appreciate
1
avtor2.00 |
07-22-2018, 12:13 PM | #2422 | |
New Member
2
Rep 7
Posts |
Quote:
is there an option to enable door handle light with reverse gear and front fog lights with turn signal on F25? UPD: Check all BMW forums in RU segment, tried all combinations that works for other F-series, no one found solution yet. Last edited by avtor; 07-23-2018 at 02:53 PM.. Reason: update |
|
Appreciate
0
|
07-22-2018, 12:15 PM | #2423 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Not possible in FRM based car.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
avtor2.00 |
08-05-2018, 05:28 PM | #2424 |
Private
18
Rep 95
Posts |
Hi experts!
I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again... So, what happened during the time I didnt connect to car? Hope someone can help... Tks in advance! My psdzdata version is "Extracted from ISTA-P version 3.61.1.001" ESysLauncherPremiumSetup_2.7.1_Build_135 |
Appreciate
0
|
08-05-2018, 06:26 PM | #2425 | |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
1
RolaNoCalhau18.00 |
08-08-2018, 09:52 AM | #2426 | |
Registered
0
Rep 2
Posts |
Quote:
ED, |
|
Appreciate
0
|
08-08-2018, 09:54 AM | #2427 | |
Registered
0
Rep 2
Posts |
Quote:
ED, |
|
Appreciate
0
|
08-08-2018, 11:33 AM | #2428 | |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
Let me say it again. "Update to Latest e-Sys Launcher 2.8.2. Same download link as old versions".
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
08-17-2018, 10:43 AM | #2430 |
General
10531
Rep 41,157
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
You cannot send or receive PM's yet. Send me one when you can.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
09-09-2018, 12:41 AM | #2431 |
Mr
21
Rep 103
Posts |
Hi experts
First of all excuse me for my english is not good enough. I have been reading several forums to get involved in the coding process. After reading all the staff of forums and watching youtube videos I bought the Enet cable and i tried to do the Basic coding for my BMW X3 Xdrive28i fab november 2016 without sucess. In Peru all the BMW cars have the basic equipment. For instance mine have a 6.5 inches screen and full analog instrument Cluster. Coming back to the coding issue. I think I used a very old software that is not longer useful Esys 3.25.3 and PsdZdata 51.3. It was able to read the FA and SVT when i Wanted to read the coding data it appeared a message indicating missing cafdfiles. I got only one cafd file (related to Kombi) just to prove. The esys could read data but when I tried to modify it only empty folders appeared in the window. I would appreciate too much if you can help me providing me the current coding software and all the staff needed for this purpose. Thanks in advance |
Appreciate
0
|
09-09-2018, 12:52 AM | #2432 | |
Major General
2376
Rep 8,364
Posts |
Quote:
|
|
Appreciate
0
|
09-09-2018, 01:16 AM | #2433 | |
Mr
21
Rep 103
Posts |
Quote:
|
|
Appreciate
0
|
09-09-2018, 05:39 PM | #2435 |
Mr
21
Rep 103
Posts |
Dear Almaretto
Today i downloaded all the esys files 3.28 and PL 2.8 and psdzdata 4.13 i did the coding to show the speed in km/h but i got an error indicating i have to take the car to the dealer inmediately and the date and time does not appear. Can you please help me? |
Appreciate
0
|
09-09-2018, 06:05 PM | #2436 | |
________
4164
Rep 2,301
Posts |
Quote:
|
|
Appreciate
0
|
09-09-2018, 07:31 PM | #2437 |
Mr
21
Rep 103
Posts |
Yes, it worked I realized when I came back to check again. Thanks.
I tried to make coding for the HU Entry Nav [63] to show the sport Display (torque and power). I have problems reading the coding data I got this message: CAFD_00000DED_003_015_039 Fehler: NCD read from ECU "ECUid:HU_ENTRYNAV_0x63" for CAF "cafd_00000ded-003_015_039" code: TIMEOUT P2/T2 ocurred description: p2 timeout on service RDBI_PLAIN has error in result... Severity: error [2130765072] I check in the psdzdata and the CAFD file is there. I used the PSDZ data that Amaretto uploaded today. Can you help me please? Last edited by aspame82; 09-09-2018 at 07:34 PM.. Reason: missing info |
Appreciate
0
|
09-09-2018, 07:34 PM | #2438 | |
________
4164
Rep 2,301
Posts |
Quote:
In regards to your timeout error, I'm not sure as it could be a number of things. I would recommend setting it all up again to re-read the data: 1- Turn the computer off 2- Turn the computer on 3- Turn the car off 4- Turn the car on (not the engine, but the accessories) 5- Plug the ETH cable 6- Open ESYS 7- Connect to car 8- Read data Please report back! |
|
Appreciate
0
|
09-10-2018, 09:23 AM | #2439 |
Mr
21
Rep 103
Posts |
unfortunately it did not work I got the same message:
Transaktions-Report: Aktion: Codierdaten lesen CAFD_00000DED_003_015_039 Fehler: CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070] negative response error: code: TIMEOUT P2/T2 occurred description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET severity: ERROR [2130765072] I have checke the CAFD file CAFD_00000DED_003_015_039 in the PSDZdata folder and it exists. I do not know what can be happening |
Appreciate
0
|
09-10-2018, 05:11 PM | #2440 |
Mr
21
Rep 103
Posts |
How to reset the driving style memory
Hi Experts, A long time ago I saw a post about coding the driving style memory.
for instance for cases where the old driver have an agressive style and yours isnt. Can you please help me to set this memory so the system can relearn your driving style. thanks in advance |
Appreciate
0
|
09-10-2018, 09:48 PM | #2441 | |
Major General
2376
Rep 8,364
Posts |
Quote:
That error has to do with communication, invalid FA, or invalid fdl coding. |
|
Appreciate
0
|
09-11-2018, 05:27 PM | #2442 | |
Mr
21
Rep 103
Posts |
Quote:
I was able to read coding data for CAS and FRM and I could make coding for both.However, It didnt read the HU_Entry nav Therefore I didnt make any coding. Btw I used the last PSDzdata you uploaded. What else can I do? Thanks in advance for your help. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|