[bulwhip]

I wanna get some new wheels for my X3M Comp. I wanna stick with the 21.9 and 21x10 size

What's the best offset to get a flush look without having to use spacers? (front and rear?)

Who is making wheels for the X3M Comp?

If I find a good looking wheel, I'd be fine with using spacers If I had too.(12mm-15mm)

Looking for a gloss black finish as well.



Thanks for your help.

[r33_RGSport]

I should be able to get you a set from Forgestar.

[bulwhip]

Can you post some pics or a link?

Also what about my other questions?
Thanks

[r33_RGSport]

Originally Posted by bulwhip

Can you post some pics or a link?

Also what about my other questions?
Thanks

https://www.forgestar.com/

That G05 X5 wheels, they didn't list the offset.
If you can find out the offset, I can check if it will fit or not.

[bulwhip]

Originally Posted by r33_RGSport

https://www.forgestar.com/

That G05 X5 wheels, they didn't list the offset.
If you can find out the offset, I can check if it will fit or not.

Thanks do you have a recommendation, or will any of these FS wheels work?

I need lowering springs too

[r33_RGSport]

Originally Posted by bulwhip

Thanks do you have a recommendation, or will any of these FS wheels work?

I need lowering springs too

H&R spring not available yet in the US.
Should be soon.

I believe any FS style are available.

I got your PM, I'll check tomorrow.

[bulwhip]

Originally Posted by r33_RGSport

H&R spring not available yet in the US.
Should be soon.

I believe any FS style are available.

I got your PM, I'll check tomorrow.

OK great Thank you.

[AlexFL]

BBS has awesome LM wheels that fit (LM 409 and 410), but they are obviously very expensive.

[bulwhip]

Yes those are nice but more than I wanted to spend for something like this.

[Jamdown]

Originally Posted by r33_RGSport

H&R spring not available yet in the US.
Should be soon.

I believe any FS style are available.

I got your PM, I'll check tomorrow.

Did the Forgestar work out? I’m also interested.

[r33_RGSport]

Originally Posted by Jamdown

Did the Forgestar work out? I’m also interested.

Should be.
PM me which style and finish that you wanted, and I'll give you a quote.

[Jamdown]

Originally Posted by r33_RGSport

Should be.
PM me which style and finish that you wanted, and I'll give you a quote.

PM sent.

[Influence]

Originally Posted by bulwhip

I wanna get some new wheels for my X3M Comp. I wanna stick with the 21.9 and 21x10 size

What's the best offset to get a flush look without having to use spacers? (front and rear?)

Who is making wheels for the X3M Comp?

If I find a good looking wheel, I'd be fine with using spacers If I had too.(12mm-15mm)

Looking for a gloss black finish as well.



Thanks for your help.

Here's a little table I put together to help me out with my wheel selection. "Perfect" fitment is open to interpretation, but this should get you pretty close to perfectly flush with the wheel wells:

Perfect fitment (no spacers, second ET is with 12mm spacers)
Fronts:
21 x 9.0 ET13 ET25
21 x 9.5 ET19 ET31
Rears:
20 x 10 ET27 ET39
20 x 10.5 ET33 ET45
20 x 11 ET39 ET51

Shy of custom/semi-custom brands, you might want to consider using a spacer with a higher offset rim, particularly if cost is an issue. I hope this helps.

Also, watch the concavity. Apparently a lot of the "super deep" designs have issues with clearing the brakes. Deep designs are usually fine, except on the fronts.