Coding made Easy: A step by step procedure

RolaNoCalhau · 10-18-2019, 11:37 AM

Quote:

Originally Posted by shawnsheridan

That is E-Sys Launcher version, not E-Sys version, and neither as it releates to versioning has anything to do with connection issues.

Hi Shawn,
This is the same problem I had in May,2018, quote:

"I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!"

Today it happened the same!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.8.2_Build_15

shawnsheridan · 10-18-2019, 11:45 AM

Quote:

Originally Posted by RolaNoCalhau

Hi Shawn,
This is the same problem I had in May,2018, quote:

"I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!"

Today it happened the same!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.8.2_Build_15

Unfortunately, E-Sys Launcher PREMIUM 2.8.2 .EST Token expired 12/30/2018, and for now there is no updated E-Sys Launcher. There is a workaround here to rearm it:

E-Sys Launcher Premium Rearm 2.0.4:
Https://f30.bimmerpost.com/forums/sh...62&postcount=1

Or you can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019...r-pro-282.html

RolaNoCalhau · 10-19-2019, 01:43 PM

Quote:

Originally Posted by shawnsheridan

Unfortunately, E-Sys Launcher PREMIUM 2.8.2 .EST Token expired 12/30/2018, and for now there is no updated E-Sys Launcher. There is a workaround here to rearm it:

E-Sys Launcher Premium Rearm 2.0.4:
Https://f30.bimmerpost.com/forums/sh...62&postcount=1

Or you can use E-Sys Launcher PRO 2.8.2 for free, at least until April 2020 when it expires:
http://tokenmaster.blogspot.com/2019...r-pro-282.html

Tk you so much once more for this!

shawnsheridan · 10-19-2019, 05:07 PM

Quote:

Originally Posted by RolaNoCalhau

Tk you so much once more for this!

anjuna · 10-24-2019, 08:23 AM

Can I get the latest psdzdata FULL?
Thank you

shawnsheridan · 10-24-2019, 08:36 AM

Quote:

Originally Posted by anjuna

Can I get the latest psdzdata FULL?
Thank you

PM sent.

Rasika Atapattu · 11-10-2019, 02:02 AM

Hi greetings to all. I'm a new member and I want to lean all about F10 & F30 coding. Can someone guide me. Step by step instructions will be superb. I'm even willing to pay to learn. Please someone help me. Thank you in advance

shawnsheridan · 11-10-2019, 08:57 AM

Quote:

Originally Posted by Rasika Atapattu

Hi greetings to all. I'm a new member and I want to lean all about F10 & F30 coding. Can someone guide me. Step by step instructions will be superb. I'm even willing to pay to learn. Please someone help me. Thank you in advance

Just need software and Guides. PM sent. Beyond that, YouTube has many video guides.

Toad535 · 11-10-2019, 09:59 PM

Quote:

Originally Posted by flexfft

Is it possible to disable the side marker lights through any of these coding options? (the amber lights on the side of the xenons that always stay on). If someone that is going through this now could confirm it would be greatly appreciated.

Would love to know the answer to this, 7 years later.

smkf · 11-12-2019, 10:24 PM

I’m new to coding world. May I have The link for software please? Thanks in advance.

maaii11 · 11-12-2019, 11:07 PM

Hi Sir

Check this out, you need e-sys 3.27.1 & Launcher Pro 2.8.x.

https://www.bimmerfest.com/forums/sh...d.php?t=983244

shawnsheridan · 11-13-2019, 05:25 AM

Quote:

Originally Posted by smkf

I’m new to coding world. May I have The link for software please? Thanks in advance.

PM sent.

Bibou19 · 11-14-2019, 05:17 AM

hello, I realize the retrofit of the M steering wheel with paddle, i code 2TB in EGS,ICM,KOMBI and JBBF. But my paddle didnt work.

I have x3 35i build date : 0910, anyone can help me. I dont understand why is not working.
Thanks,

Almaretto · 11-15-2019, 07:12 AM

Quote:

Originally Posted by Bibou19

hello, I realize the retrofit of the M steering wheel with paddle, i code 2TB in EGS,ICM,KOMBI and JBBF. But my paddle didnt work.

I have x3 35i build date : 0910, anyone can help me. I dont understand why is not working.
Thanks,

SZL_LWS_03 > Lenkrad_Schaltpaddles?

south105323 · 12-03-2019, 04:00 AM

Been trying to get ICAM working on an F25. After finally getting the camera connected and recognised on e-Sys, I VO coded 3AG, The camera functions come up, and the parking sensors move across to the right. I just see a blank black screen for the rear view display.

I am using E-Sys 3.27.1 with tokenmaster launcher pro 2.8.2.162.
PSdZData Lite 4.19.40.

There is no CAFD is CAM2 ECU, my problem is that 'Detect CAF from SWE' is greyed out, as is everything in the KIS/SVT box, as well as the right button Coding and code FDL options in the CAM2 ECU only.

ECU detail seems OK from what I can see...

ISTEP is F25-19-03-530 (current)

Any ideas what I'm doing wrong?

shawnsheridan · 12-03-2019, 07:16 AM

Quote:

Originally Posted by south105323

Been trying to get ICAM working on an F25. After finally getting the camera connected and recognised on e-Sys, I VO coded 3AG, The camera functions come up, and the parking sensors move across to the right. I just see a blank black screen for the rear view display.

I am using E-Sys 3.27.1 with tokenmaster launcher pro 2.8.2.162.
PSdZData Lite 4.19.40.

There is no CAFD is CAM2 ECU, my problem is that 'Detect CAF from SWE' is greyed out, as is everything in the KIS/SVT box, as well as the right button Coding and code FDL options in the CAM2 ECU only.

ECU detail seems OK from what I can see...

ISTEP is F25-19-03-530 (current)

Any ideas what I'm doing wrong?

Injecting CAFD (Detect CAF for SWE) and Flashing ECU's with >= v.4.17.20 PSdZData requires using newer E-Sys 3.30.0 or higher.

Saeed Abdullatif · 12-03-2019, 07:35 AM

Hi,

I own a 2017 X3 Xdrive 28 M but cars in Oman don't come with Apple Carplay activated and the dealer says its not possible to have this done. However reading online i understand that my car since its a 2017 model does have the hardware required for carplay to work. The menus in the I Drive system don;t show carplay as an option. Actually even newer 2020 models dont have that either. Upon research i found different website claiming to be able to turn this feature on using USB coding for a fee. Bimmer Tech charges $399 and others charge as low as $65. I am really interested in this and do not mind paying $399. However, i am worried about causing damage to my car if i do this.

Can you offer me advise on this topic. Will i be taking any risk. Is there a chance that this may brick my car? or cause damage to the ID system and void my warranty? I have read on post where someone was saying that if the ID system is updated by the dealer after i have done the carplay activation it may undo the coding, lockout the USB port and lockout other features in I Drive rendering it useless at which point my only recourse is to buy a new screen.

I really want to do this but do not want to spoil my car. I just purchased this car new although its a 2017 model and dont want anything bad to happen to it.

Your advise will be much appreciated.

shawnsheridan · 12-03-2019, 08:00 AM

Quote:

Originally Posted by Saeed Abdullatif

Hi,

I own a 2017 X3 Xdrive 28 M but cars in Oman don't come with Apple Carplay activated and the dealer says its not possible to have this done. However reading online i understand that my car since its a 2017 model does have the hardware required for carplay to work. The menus in the I Drive system don;t show carplay as an option. Actually even newer 2020 models dont have that either. Upon research i found different website claiming to be able to turn this feature on using USB coding for a fee. Bimmer Tech charges $399 and others charge as low as $65. I am really interested in this and do not mind paying $399. However, i am worried about causing damage to my car if i do this.

Can you offer me advise on this topic. Will i be taking any risk. Is there a chance that this may brick my car? or cause damage to the ID system and void my warranty? I have read on post where someone was saying that if the ID system is updated by the dealer after i have done the carplay activation it may undo the coding, lockout the USB port and lockout other features in I Drive rendering it useless at which point my only recourse is to buy a new screen.

I really want to do this but do not want to spoil my car. I just purchased this car new although its a 2017 model and dont want anything bad to happen to it.

Your advise will be much appreciated.

PM sent.

south105323 · 12-03-2019, 08:19 AM

Quote:

Originally Posted by shawnsheridan

Injecting CAFD (Detect CAF for SWE) and Flashing ECU's with >= v.4.17.20 PSdZData requires using newer E-Sys 3.30.0 or higher.

So should I use the download for 3.31.0 E-Sys, and will it work with LauncherPro 2.8.2?

Or is there an older PSdZData version I can get that will work with 3.27.1?

Thanks for the quick response..

shawnsheridan · 12-03-2019, 08:23 AM

Quote:

Originally Posted by south105323

So should I use the download for 3.31.0 E-Sys, and will it work with LauncherPro 2.8.2?

Or is there an older PSdZData version I can get that will work with 3.27.1?

Thanks for the quick response..

Yes, Launcher PRO 2.8.1 Build 155 added support for E-Sys 3.30.1.

south105323 · 12-03-2019, 09:14 AM

That didn't work, uninstalled everything, installed E-Sys 3.31.0, then Launcher Pro 2.8.2 again clean from tokenmaster's website. I get the message:

Unsupported Version - Esys Version 3.31.0(build 50446)-2017-09-06.

On Tokenmaster's page for 2.8.2 (Basically a FU to people selling 2.8.1) it says it only supports 3.x.x versions (up to 3.2.8)

Is there an older PSdZData version that you can PM me a link to as this is a 3+ year old F?

shawnsheridan · 12-03-2019, 09:19 AM

Quote:

Originally Posted by south105323

That didn't work, uninstalled everything, installed E-Sys 3.31.0, then Launcher Pro 2.8.2 again clean from tokenmaster's website. I get the message:

Unsupported Version - Esys Version 3.31.0(build 50446)-2017-09-06.

On Tokenmaster's page for 2.8.2 (Basically a FU to people selling 2.8.1) it says it only supports 3.x.x versions (up to 3.2.8) (edited E-Sys version)

Is there an older PSdZData version that you can PM me a link to as this is a 3+ year old F?

Use E-Sys 3.30.1

10-24-2019, 08:23 AM	#2667
anjuna First Lieutenant 307 Rep 394 Posts Drives: f25 Join Date: Feb 2017 Location: houston iTrader: (0)	Can I get the latest psdzdata FULL? Thank you
	Appreciate 0 Quote

11-10-2019, 02:02 AM	#2669
Rasika Atapattu Registered 0 Rep 1 Posts Drives: BMW F10 520D Join Date: Nov 2019 Location: Sri Lanka iTrader: (0)	Hi greetings to all. I'm a new member and I want to lean all about F10 & F30 coding. Can someone guide me. Step by step instructions will be superb. I'm even willing to pay to learn. Please someone help me. Thank you in advance
	Appreciate 0 Quote

11-12-2019, 10:24 PM	#2672
smkf Registered 0 Rep 1 Posts Drives: Bmw x4 F26 Join Date: Nov 2019 Location: Thailand iTrader: (0)	I’m new to coding world. May I have The link for software please? Thanks in advance.
	Appreciate 0 Quote

11-12-2019, 11:07 PM	#2673
maaii11 Private 21 Rep 70 Posts Drives: Mini F54 Join Date: May 2019 Location: Taiwan iTrader: (0)	Hi Sir Check this out, you need e-sys 3.27.1 & Launcher Pro 2.8.x. https://www.bimmerfest.com/forums/sh...d.php?t=983244
	Appreciate 0 Quote

11-14-2019, 05:17 AM	#2675
Bibou19 New Member 0 Rep 7 Posts Drives: X3 F25 35i Join Date: Oct 2019 Location: Paris iTrader: (0)	hello, I realize the retrofit of the M steering wheel with paddle, i code 2TB in EGS,ICM,KOMBI and JBBF. But my paddle didnt work. I have x3 35i build date : 0910, anyone can help me. I dont understand why is not working. Thanks,
	Appreciate 0 Quote

12-03-2019, 04:00 AM	#2677
south105323 Registered 0 Rep 4 Posts Drives: BMW X3 F25 Join Date: Dec 2019 Location: Kildare, Ireland iTrader: (0)	F25 ICAM coding Been trying to get ICAM working on an F25. After finally getting the camera connected and recognised on e-Sys, I VO coded 3AG, The camera functions come up, and the parking sensors move across to the right. I just see a blank black screen for the rear view display. I am using E-Sys 3.27.1 with tokenmaster launcher pro 2.8.2.162. PSdZData Lite 4.19.40. There is no CAFD is CAM2 ECU, my problem is that 'Detect CAF from SWE' is greyed out, as is everything in the KIS/SVT box, as well as the right button Coding and code FDL options in the CAM2 ECU only. ECU detail seems OK from what I can see... ISTEP is F25-19-03-530 (current) Any ideas what I'm doing wrong? Attached Images
	Appreciate 0 Quote

12-03-2019, 07:35 AM	#2679
Saeed Abdullatif Registered 0 Rep 1 Posts Drives: 2017 BMW X3 M Join Date: Dec 2019 Location: Oman iTrader: (0)	2017 X3 XDrive 28 M - Apple Carplay activation Hi, I own a 2017 X3 Xdrive 28 M but cars in Oman don't come with Apple Carplay activated and the dealer says its not possible to have this done. However reading online i understand that my car since its a 2017 model does have the hardware required for carplay to work. The menus in the I Drive system don;t show carplay as an option. Actually even newer 2020 models dont have that either. Upon research i found different website claiming to be able to turn this feature on using USB coding for a fee. Bimmer Tech charges $399 and others charge as low as $65. I am really interested in this and do not mind paying $399. However, i am worried about causing damage to my car if i do this. Can you offer me advise on this topic. Will i be taking any risk. Is there a chance that this may brick my car? or cause damage to the ID system and void my warranty? I have read on post where someone was saying that if the ID system is updated by the dealer after i have done the carplay activation it may undo the coding, lockout the USB port and lockout other features in I Drive rendering it useless at which point my only recourse is to buy a new screen. I really want to do this but do not want to spoil my car. I just purchased this car new although its a 2017 model and dont want anything bad to happen to it. Your advise will be much appreciated.
	Appreciate 0 Quote

12-03-2019, 09:14 AM	#2683
south105323 Registered 0 Rep 4 Posts Drives: BMW X3 F25 Join Date: Dec 2019 Location: Kildare, Ireland iTrader: (0)	That didn't work, uninstalled everything, installed E-Sys 3.31.0, then Launcher Pro 2.8.2 again clean from tokenmaster's website. I get the message: Unsupported Version - Esys Version 3.31.0(build 50446)-2017-09-06. On Tokenmaster's page for 2.8.2 (Basically a FU to people selling 2.8.1) it says it only supports 3.x.x versions (up to 3.2.8) Is there an older PSdZData version that you can PM me a link to as this is a 3+ year old F? Last edited by south105323; 12-03-2019 at 09:18 AM.. Reason: edited E-Sys version
	Appreciate 0 Quote