[dooo]

Shit, I wish I would have seen this earlier. I have been looking for some time now. Just order3d 2 sets of Future Classic spacers. Ordered the 12mm sets and should have them tomorrow. It's been holding me off from installing my MSS

[rntatz66]

Just purchased your 15mm for my 2022 X4MC in black!

[r33_RGSport]

Originally Posted by rntatz66

Just purchased your 15mm for my 2022 X4MC in black!

Thank you.

[rntatz66]

Whats the best thing to use to clean the hub and wheel before installing the spacer? And what's the best way to apply the grease that's supplied with the spacers? Thnks!!

[r33_RGSport]

Originally Posted by rntatz66

Whats the best thing to use to clean the hub and wheel before installing the spacer? And what's the best way to apply the grease that's supplied with the spacers? Thnks!!

Sand paper or wire brush to clean.
Use your finger or brush to apply anti-seize.

[rntatz66]

Originally Posted by r33_RGSport

Sand paper or wire brush to clean.
Use your finger or brush to apply anti-seize.

Thank you! I had a question for your expertise....I had bought 15mm spacers, but in the meantime, I did the 265/295 tire upsize mod on my stock 21s. Loving the look but still wanted to add the spacers...but will that be too much?

[r33_RGSport]

Originally Posted by rntatz66

Thank you! I had a question for your expertise....I had bought 15mm spacers, but in the meantime, I did the 265/295 tire upsize mod on my stock 21s. Loving the look but still wanted to add the spacers...but will that be too much?

Are you lowered or not?

[rntatz66]

Originally Posted by r33_RGSport

Are you lowered or not?

Nope. No plans to lower at this time.

[r33_RGSport]

Originally Posted by rntatz66

Nope. No plans to lower at this time.

It will poke out a bit IMO.

[-JLT-]

here's mine w/ 265/295 and 15mm spacers f/r on stock height, I like the aggressive stance

[-JLT-]

Originally Posted by rntatz66

Nope. No plans to lower at this time.

refer above

[rntatz66]

Originally Posted by -JLT-

refer above

Love it! No rubbing at all?

[-JLT-]

Originally Posted by rntatz66

Love it! No rubbing at all?

no. i will be lowering her soon

[rntatz66]

Originally Posted by r33_RGSport

Sand paper or wire brush to clean.
Use your finger or brush to apply anti-seize.

Should i use any type of Cleaner? Would wd40 be workable?

[r33_RGSport]

Originally Posted by rntatz66

Should i use any type of Cleaner? Would wd40 be workable?

WD40 or PB Blaster is fine.

[rntatz66]

Originally Posted by r33_RGSport

WD40 or PB Blaster is fine.

Hey! What torque settings should I use for the 15mm spacers?

[r33_RGSport]

Originally Posted by rntatz66

Hey! What torque settings should I use for the 15mm spacers?

I normally put 110 lb-ft with spacers.

[rntatz66]

So I did the 265/295 and 15mm at corners

[Vervish]

Looking to go 12mm - Can I reuse the stock wheel locks, or would I need an extended version?

[r33_RGSport]

Originally Posted by Vervish

Looking to go 12mm - Can I reuse the stock wheel locks, or would I need an extended version?

You'll need extended lug bolts.

[Vervish]

Originally Posted by r33_RGSport

You'll need extended lug bolts.

Thanks - I wanted to also retain the wheel lock bolts - are they offered in extended format?

[r33_RGSport]

Originally Posted by Vervish

Thanks - I wanted to also retain the wheel lock bolts - are they offered in extended format?

I know that there is tuner lugs in the market, but I haven't seen a proper locking lugs.