[spta97]

I am looking at aftermarket rims in 20”x9” for a square winter setup on my pending X3MC.

Most sites don’t have 2020 models. Can anyone confirm what offset is required and what width range 255/45/20 Scorpion Winters will work with?

Thanks!

[Tommyj]

The non comp X3/4 uses 9 x 20 with a 28mm offset with a 255/45 tyre, I use willtheyfit.com to check alternative wheel widths and offsets

[DC X3M40i]

I'm running 255/45/r20
Pirelli scorpion winters. So far so good

[spta97]

Originally Posted by Tommyj

The non comp X3/4 uses 9 x 20 with a 28mm offset with a 255/45 tyre, I use willtheyfit.com to check alternative wheel widths and offsets

This is great, thank you.

Looks like as long as I am within +/- 3mm it won’t be much difference.

Are the wheels the same on the non comp and just the tire size is staggered? I thought the wheels were different sizes front and back?

[spta97]

Originally Posted by DC F97

I'm running 255/45/r20
Pirelli scorpion winters. So far so good

What size are your wheels including the offset?

[DC X3M40i]

Originally Posted by spta97

What size are your wheels including the offset?

That would have been helpful
20x9 35 offset according to tirerack

[spta97]

Originally Posted by DC F97

That would have been helpful
20x9 35 offset according to tirerack

Thanks!

Have you noticed the wheels sitting more in with the increase in offset?

[DC X3M40i]

Originally Posted by spta97

Thanks!

Have you noticed the wheels sitting more in with the increase in offset?

Kinda. Not sure if you can tell from these pics
Also to add...I'm not a car expert when it comes to all this stuff...just going based on what I see lol

[FSociety]

Why not 265 or 275 instead of 255 curious?

[spta97]

Originally Posted by DC F97

Kinda. Not sure if you can tell from these pics
Also to add...I'm not a car expert when it comes to all this stuff...just going based on what I see lol

Thanks for the pics. From my research (I am a noob at wheels) it seem that as you increase offset the wheels move further in the well and as you decrease it they move outward.

Yours do look a little pushed in but not sure how that compares to the OEM wheels. As people are getting spacers to push them out I suspect they are tucked in from factory?

[spta97]

Originally Posted by FSociety

Why not 265 or 275 instead of 255 curious?

I can't speak for DC F97, but my intention is to get more winter traction (narrower tires are better in the snow).

I doubt 10 or 20 mm would make that much of a difference though.

[DC X3M40i]

Originally Posted by spta97

I can't speak for DC F97, but my intention is to get more winter traction (narrower tires are better in the snow).

I doubt 10 or 20 mm would make that much of a difference though.

Agreed. Traction is key!