[IND-Distribution]

At IND, it’s our mission to supply the parts you need to craft the perfect BMW. BMW M Performance has produced Carbon Air Duct Trims or "boomerangs" that replace the factory trim found on the front bumper.

NOTE: Fits LCI models ONLY

The BMW M Performance F97 X3M LCI Carbon Front Bumper Side Grille Set may be viewed at the following link to our online store:
https://ind-distribution.com/product...ide-grille-set

Please contact IND by phone or email for more information or to place your order.
866.963.4520 | info@ind-distribution.com

[Sublimeside]

IND-Distribution Do you have an install guide for these? Bought them from you all and can't reinstall/connect the sensor.

[IND-Distribution]

Originally Posted by Sublimeside

IND-Distribution Do you have an install guide for these? Bought them from you all and can't reinstall/connect the sensor.

We don't have an installation guide that we have completed, but if you email us, we can send you BMW's instructions.

info@IND-Distribution.com

[Sublimeside]

Figured out how to get these installed. In order to properly install these, you have to go through the side wheel well as if you were installing painted reflectors. There's enough access once the arch guard is loose and you can fit your hand/arm in through the the side to plug the wiring harness back into the sensor.

[Scottie2hottie]

Originally Posted by Sublimeside

Figured out how to get these installed. In order to properly install these, you have to go through the side wheel well as if you were installing painted reflectors. There's enough access once the arch guard is loose and you can fit your hand/arm in through the the side to plug the wiring harness back into the sensor.

Was it easy to install? I’m thinking of getting them.

[Sublimeside]

Ya. It’s not that hard. The most challenging part is disconnecting the sensors. You will have to replace the plastics rivets. You can get them on Amazon.