BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      07-19-2018, 10:45 PM   #2421
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by avtor View Post
Hi, just started coding my BMW x3 F25 2014 and cannot find FEM or BDC_BODY in my E-Sys 3.27.1 by launcher v.2.8.8, v.56.4_PSdZData_Lite.
Can anyone direct me how to make turn lights with fog lights.
(like this: FEM | 3062 | MAPPING_abbiegel_L_output | nsw_l) and how to turn on handle lights on when rear gear on,
(like this: FEM | 3070 LciMaster | OVT_BEI_RUECKFAHRLICHT | aktiv)
I cannot find this parameters in my e-sys. Thanks!
FEM_BODY is only in F2x/F3x/F8x vehicles (eg, 1-4 series, M2/M3/M4)
BDC_BODY is in I001, I012, F015, and G-series

F10 and F25 share Cheat Sheets. Both cannot enable door handle lights.
Appreciate 1
avtor2.00
      07-22-2018, 12:13 PM   #2422
avtor
New Member
avtor's Avatar
Ukraine
2
Rep
7
Posts

Drives: BMW x3 F25 2014
Join Date: Jul 2018
Location: Ukraine

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
F10 and F25 share Cheat Sheets. Both cannot enable door handle lights.
Thanks,
is there an option to enable door handle light with reverse gear and front fog lights with turn signal on F25?

UPD:
Check all BMW forums in RU segment, tried all combinations that works for other F-series, no one found solution yet.

Last edited by avtor; 07-23-2018 at 02:53 PM.. Reason: update
Appreciate 0
      07-22-2018, 12:15 PM   #2423
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,300
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by avtor View Post
Thanks,
is there an option to enable door handle light with reverse gear and front fog lights with turn signal on F25?
Not possible in FRM based car.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 1
avtor2.00
      08-05-2018, 05:28 PM   #2424
RolaNoCalhau
Private
RolaNoCalhau's Avatar
Portugal
18
Rep
95
Posts

Drives: 2012 520dA Touring
Join Date: Jan 2015
Location: Lisbon

iTrader: (0)

Hi experts!
I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.7.1_Build_135
Appreciate 0
      08-05-2018, 06:26 PM   #2425
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,300
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by RolaNoCalhau View Post
Hi experts!
I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.7.1_Build_135
Update to Latest e-Sys Launcher 2.8.2. Same download link as old versions.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 1
      08-08-2018, 09:52 AM   #2426
edwinluvsnatalie
Registered
0
Rep
2
Posts

Drives: 2014 x3 xdrivei35 M Sport
Join Date: May 2016
Location: Orange, NY

iTrader: (0)

Quote:
Originally Posted by RolaNoCalhau View Post
Hi experts!
I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.7.1_Build_135
I have the same issue as well just as you described. I've search every where and havent yet found a solution. Let me know if you have. Thanks
ED,
Appreciate 0
      08-08-2018, 09:54 AM   #2427
edwinluvsnatalie
Registered
0
Rep
2
Posts

Drives: 2014 x3 xdrivei35 M Sport
Join Date: May 2016
Location: Orange, NY

iTrader: (0)

Quote:
Originally Posted by RolaNoCalhau View Post
Hi experts!
I have not been coding for a while, perhaps 1 year or so, and when today tried to connect to car again via E-Sys Launcher Premium the EST Software Token appeared to Generate Token (which I had already done in the past). And in spite I entered the correct pin it never allowed me to go ahead with the connection. I put the pin and confirmed it, then a window showed up saying "EST Software Token Successfully" and after pressing ok it reappeared again and again and again...
So, what happened during the time I didnt connect to car?
Hope someone can help...
Tks in advance!

My psdzdata version is "Extracted from ISTA-P version 3.61.1.001"
ESysLauncherPremiumSetup_2.7.1_Build_135
I have the same issue as well just as you described. I've search every where and havent yet found a solution. Let me know if you have. Thanks
ED,
Appreciate 0
      08-08-2018, 11:33 AM   #2428
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,300
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by edwinluvsnatalie View Post
I have the same issue as well just as you described. I've search every where and havent yet found a solution. Let me know if you have. Thanks
ED,
Seriously...you cant find a solution, yet the solution is posted right above your post in response to the very post you quoted.

Let me say it again.

"Update to Latest e-Sys Launcher 2.8.2. Same download link as old versions".
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      08-17-2018, 10:42 AM   #2429
xamthe2
Registered
0
Rep
1
Posts

Drives: BMW X3 F25
Join Date: Aug 2018
Location: Australia

iTrader: (0)

Hi,
Can you send me the latest E-Sys and the psdzdata for my 2015 X3 F25? Cheers!
Appreciate 0
      08-17-2018, 10:43 AM   #2430
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,300
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by xamthe2 View Post
Hi,
Can you send me the latest E-Sys and the psdzdata for my 2015 X3 F25? Cheers!
You cannot send or receive PM's yet. Send me one when you can.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      09-09-2018, 12:41 AM   #2431
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Hi experts
First of all excuse me for my english is not good enough. I have been reading several forums to get involved in the coding process. After reading all the staff of forums and watching youtube videos I bought the Enet cable and i tried to do the Basic coding for my BMW X3 Xdrive28i fab november 2016 without sucess. In Peru all the BMW cars have the basic equipment. For instance mine have a 6.5 inches screen and full analog instrument Cluster.

Coming back to the coding issue. I think I used a very old software that is not longer useful Esys 3.25.3 and PsdZdata 51.3. It was able to read the FA and SVT when i Wanted to read the coding data it appeared a message indicating missing cafdfiles. I got only one cafd file (related to Kombi) just to prove. The esys could read data but when I tried to modify it only empty folders appeared in the window.
I would appreciate too much if you can help me providing me the current coding software and all the staff needed for this purpose.
Thanks in advance
Appreciate 0
      09-09-2018, 12:52 AM   #2432
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by aspame82 View Post
I would appreciate too much if you can help me providing me the current coding software and all the staff needed for this purpose.
Thanks in advance
https://www.bimmerfest.com/forums/sh...d.php?t=983244
Appreciate 0
      09-09-2018, 01:16 AM   #2433
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
Thank you Almaretto
Appreciate 0
      09-09-2018, 01:55 AM   #2434
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by aspame82 View Post
Thank you Almaretto
Appreciate 0
      09-09-2018, 05:39 PM   #2435
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Dear Almaretto
Today i downloaded all the esys files 3.28 and PL 2.8 and psdzdata 4.13 i did the coding to show the speed in km/h but i got an error indicating i have to take the car to the dealer inmediately and the date and time does not appear.
Can you please help me?
Appreciate 0
      09-09-2018, 06:05 PM   #2436
________
________
4157
Rep
2,301
Posts

Drives: ________
Join Date: Sep 2018
Location: ________

iTrader: (0)

Quote:
Originally Posted by aspame82 View Post
Dear Almaretto
Today i downloaded all the esys files 3.28 and PL 2.8 and psdzdata 4.13 i did the coding to show the speed in km/h but i got an error indicating i have to take the car to the dealer inmediately and the date and time does not appear.
Can you please help me?
Did you turn the car off and on again? (Not kidding)
Appreciate 0
      09-09-2018, 07:31 PM   #2437
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Quote:
Originally Posted by OnerDriver View Post
Did you turn the car off and on again? (Not kidding)
Yes, it worked I realized when I came back to check again. Thanks.

I tried to make coding for the HU Entry Nav [63] to show the sport Display (torque and power). I have problems reading the coding data I got this message:
CAFD_00000DED_003_015_039 Fehler:
NCD read from ECU "ECUid:HU_ENTRYNAV_0x63" for CAF "cafd_00000ded-003_015_039" code: TIMEOUT P2/T2 ocurred
description: p2 timeout on service RDBI_PLAIN has error in result...
Severity: error
[2130765072]

I check in the psdzdata and the CAFD file is there. I used the PSDZ data that Amaretto uploaded today.



Can you help me please?

Last edited by aspame82; 09-09-2018 at 07:34 PM.. Reason: missing info
Appreciate 0
      09-09-2018, 07:34 PM   #2438
________
________
4157
Rep
2,301
Posts

Drives: ________
Join Date: Sep 2018
Location: ________

iTrader: (0)

Quote:
Originally Posted by aspame82 View Post
Yes, it worked I realized when I came back to check again.

I tried to make coding for the HU Entry Nav [63] to show the sport Display (torque and power). I have problems reading the coding data I got this message:
CAFD_00000DED_003_015_039 Fehler:
NCD read from ECU "ECUid:HU_ENTRYNAV_0x63" for CAF "cafd_00000ded-003_015_039" code: TIMEOUT P2/T2 ocurred
description: p2 timeout on service RDBI_PLAIN has error in result...
Severity: error
[2130765072]

Can you help me please?
I'm glad it worked!

In regards to your timeout error, I'm not sure as it could be a number of things.
I would recommend setting it all up again to re-read the data:
1- Turn the computer off
2- Turn the computer on
3- Turn the car off
4- Turn the car on (not the engine, but the accessories)
5- Plug the ETH cable
6- Open ESYS
7- Connect to car
8- Read data

Please report back!
Appreciate 0
      09-10-2018, 09:23 AM   #2439
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Quote:
Originally Posted by OnerDriver View Post
I'm glad it worked!

Thank you very much



Please report back!
unfortunately it did not work I got the same message:

Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I have checke the CAFD file CAFD_00000DED_003_015_039 in the PSDZdata folder and it exists. I do not know what can be happening
Appreciate 0
      09-10-2018, 05:11 PM   #2440
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

How to reset the driving style memory

Hi Experts, A long time ago I saw a post about coding the driving style memory.
for instance for cases where the old driver have an agressive style and yours isnt.
Can you please help me to set this memory so the system can relearn your driving style.
thanks in advance
Appreciate 0
      09-10-2018, 09:48 PM   #2441
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by aspame82 View Post
unfortunately it did not work I got the same message:

Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000DED_003_015_039 Fehler:
CPS read from ECU "ECUId:HU_ENTRYNAV_0x63" failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_ENTRYNAV_63_ETHERNET
severity: ERROR
[2130765072]

I have checke the CAFD file CAFD_00000DED_003_015_039 in the PSDZdata folder and it exists. I do not know what can be happening
Not found [C012] is when you do not have matching cafd.

That error has to do with communication, invalid FA, or invalid fdl coding.
Appreciate 0
      09-11-2018, 05:27 PM   #2442
aspame82
Mr
Peru
21
Rep
103
Posts

Drives: BMW X3 XDrive28i Xline 2017
Join Date: Aug 2018
Location: Lima Peru

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
Not found [C012] is when you do not have matching cafd.

That error has to do with communication, invalid FA, or invalid fdl coding.
Dear Almaretto
I was able to read coding data for CAS and FRM and I could make coding for both.However, It didnt read the HU_Entry nav Therefore I didnt make any coding.
Btw I used the last PSDzdata you uploaded.

What else can I do?
Thanks in advance for your help.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:26 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST