[i4M50Guy]

I'm going to buy an FSC code to enable SLI.

Does anyone know what values need FDL coded? Am I right in saying that you can't VO code 8TH on the G01 platform?

[Dandle]

I'm interested in this also. Where did you get your FSC code from if you don't mind me asking?

[i4M50Guy]

Originally Posted by Dandle

I'm interested in this also. Where did you get your FSC code from if you don't mind me asking?

This guy is the cheapest I've found so far. €195 is what he's charging.

[strike4A]

Originally Posted by Dandle

I'm interested in this also. Where did you get your FSC code from if you don't mind me asking?

https://www.facebook.com/Bavarian-Co...4502282915941/

You need ISTA+ as well as E-sys if doing it yourself.

[i4M50Guy]

Originally Posted by strike4A

https://www.facebook.com/Bavarian-Co...4502282915941/

You need ISTA+ as well as E-sys if doing it yourself.

Can't see why you'd need ISTA+. You can inject an FSC with esys as well as FDL code (and VO code if 8TH can be VO coded on the G01 platform).

[strike4A]

Originally Posted by M140iGuy

Can't see why you'd need ISTA+. You can inject an FSC with esys as well as FDL code (and VO code if 8TH can be VO coded on the G01 platform).

It's to calibrate it I was told. Watched him do it.

[Bmock17]

Is this possible to add via coding if the car was not originally equipped with SLI? If so, is there anything else needed?

[i4M50Guy]

Originally Posted by Bmock17

Is this possible to add via coding if the car was not originally equipped with SLI? If so, is there anything else needed?

You need an FSC code

[Bmock17]

Originally Posted by M140iGuy

You need an FSC code

Excuse my ignorance but what is an FSC code?

[The.bands]

My online handbook and in car manual (via I drive) infers I have the Speed Limit function but never seen any sign of it operating.
Can't find any config settings in Idrive - am I missing something?

[Tim@codemybimmer]

Originally Posted by Bmock17

Excuse my ignorance but what is an FSC code?

FSC = Freischaltcode which translated is "Registration Key"

An FSC is essentially an Activation Key & Certificate required for features that can only be enabled with a valid key, such as the camera-based safety systems and Navigation, to just name a few.

[Bmock17]

Originally Posted by Tim@codemybimmer

FSC = Freischaltcode which translated is "Registration Key"

An FSC is essentially an Activation Key & Certificate required for features that can only be enabled with a valid key, such as the camera-based safety systems and Navigation, to just name a few.

Thanks Tim. Are you able to code the speed limit information to a vehicle that didn't come with it?

[Tim@codemybimmer]

Originally Posted by Bmock17

Thanks Tim. Are you able to code the speed limit information to a vehicle that didn't come with it?

In the case of the G01 X3, it would need to be equipped with the KAFAS camera (Windshield-Mounted Safety System Camera for Blind Spot Warning, Lane Departure) in order for it to detect speed signs.

Therefore it would still need an FSC ordered and loaded into the KAFAS module, before it can be coded for it to work.

[Bmock17]

Originally Posted by Tim@codemybimmer

In the case of the G01 X3, it would need to be equipped with the KAFAS camera (Windshield-Mounted Safety System Camera for Blind Spot Warning, Lane Departure) in order for it to detect speed signs.

Therefore it would still need an FSC ordered and loaded into the KAFAS module, before it can be coded for it to work.

Got it. Thanks.

[Peter1974]

Does anyone know If there is anyone in the blackpool area that can program in a fsc code I have a 2019
C3 g01 with the cameras fitted but need to active. Spoke to the guys a Bavarian coding they want £280 and £200 to travel to north west there must be someone local who can help??

[veloso77]

Originally Posted by Tim@codemybimmer

In the case of the G01 X3, it would need to be equipped with the KAFAS camera (Windshield-Mounted Safety System Camera for Blind Spot Warning, Lane Departure) in order for it to detect speed signs.

Therefore it would still need an FSC ordered and loaded into the KAFAS module, before it can be coded for it to work.

Thanks. Is it possible to toggle on / off the SLI (red circle with speed limit) on the instrument cluster after coding SLI?

[moonshine]

I had Bavarian Coding add SLI. he bought the FSC code, and then injected it / messed around with ISTA via Remote Desktop (he is in Southampton i believe, and I am in Glasgow - i understand he does not do much remotely now