[omniphil]

Seems like on older BMW's I had way more options to change.
I was just looking for a way to disable the startup warning message on idrive6. (2020 X3M)

Didn't even see it in there.

Just wondering what else you guys usually code off in there?

[foxdie262]

Headunit (HU_NBT_EVO) > Warning at start-up > Not active (off). It's toward the bottom of the list.

You can also turn off the camera warning right next to that.

[pyo]

You can also disable the DSC popup when turning it off...

HEADUNIT - > Advance (3008 FES STABILITY_CONTROL_POPUP) -> not activ

[omniphil]

Originally Posted by pyo

You can also disable the DSC popup when turning it off...

HEADUNIT - > Advance (3008 FES STABILITY_CONTROL_POPUP) -> not activ

Is this the warning message when you turn on the MDM mode via the M button that require you to press it again for confirmation?

[omniphil]

Well, it looks like bimmercode wont allow me to access the headunit section. it says its not in the correct format.

This error seems to stem from the coding I had done remotely to update the nav system and then code full screen apple car play...

I'll try my diagnostic tool and see if that gets me in (Launch X431)

[pyo]

Originally Posted by omniphil

Is this the warning message when you turn on the MDM mode via the M button that require you to press it again for confirmation?

No, you still need to double press to confirm. Just gets rid of the popup on the head unit screen that says it's off. This way your passengers won't know what's coming

[Mattytee]

Originally Posted by omniphil

Well, it looks like bimmercode wont allow me to access the headunit section. it says its not in the correct format.

This error seems to stem from the coding I had done remotely to update the nav system and then code full screen apple car play...

I'll try my diagnostic tool and see if that gets me in (Launch X431)

Let me know if you were able to do this, I have done the same thing.

[omniphil]

Originally Posted by Mattytee

Let me know if you were able to do this, I have done the same thing.

Doesn't look like I could get to the headunit module and do any coding via the Launch X431. Seems like the only thing that will do it is Esys or Bimmergeeks pro tools, but don't want to spend $80 just to code warnings off.

Bimmercode will do any other module I have except the headunit.

[Mattytee]

Originally Posted by omniphil

Doesn't look like I could get to the headunit module and do any coding via the Launch X431. Seems like the only thing that will do it is Esys or Bimmergeeks pro tools, but don't want to spend $80 just to code warnings off.

Bimmercode will do any other module I have except the headunit.

I’m in the same boat as you but it honestly drives me crazy with the notifications lol

[omniphil]

So I decided to spend the $80 for a Protools coding license only to find that there is no section in there to disable to startup chimes in the Headunit area...

That's not cool at all...

[thestimp]

Originally Posted by omniphil

So I decided to spend the $80 for a Protools coding license only to find that there is no section in there to disable to startup chimes in the Headunit area...

That's not cool at all...

What are you trying to code off? I have seat belts and all warning messages X 3 turned off. The only one I have is drive assist Plus and MDM mode on, which I'll probably figure out how to code off this weekend as it interrupts my youtube...

[omniphil]

I am trying to disable all the startup chimes/gongs when starting the vehicle.

[Th3Walrus]

Worked fine for me on both of my 2020s.

[omniphil]

Originally Posted by Th3Walrus

Worked fine for me on both of my 2020s.

Do you know specifically what section you were in and what you changed?