Coding made Easy: A step by step procedure

shawnsheridan · 03-08-2020, 03:22 PM

Quote:

Originally Posted by balaOo

OK, i try http://tokenmaster.blogspot.com/2019...r-pro-282.html you posted. Thanks shawn!

oVeRdOsE. · 04-08-2020, 10:10 AM

Quote:

Originally Posted by shawnsheridan

that token seems to be expired. I got a error when entering the code

shawnsheridan · 04-08-2020, 10:15 AM

Quote:

Originally Posted by oVeRdOsE.

that token seems to be expired. I got a error when entering the code

Token Validity is though 4/20. Not expired yet.

Issue lies with your Activation Code Copy & Paste job...

pungo · 04-08-2020, 01:59 PM

Quote:

Originally Posted by shawnsheridan

Token Validity is though 4/20. Not expired yet.

So what are the alternatives after 4/20? try to get hold of tokenmaster for a donation? E-SysX ?

shawnsheridan · 04-08-2020, 02:04 PM

Quote:

Originally Posted by pungo

So what are the alternatives after 4/20? try to get hold of tokenmaster for a donation? E-SysX ?

Unless Token Master does something between now and then, after expiration your only choices will be Launcher PRO 3.x or E-SysX.

Or buy Activation / .EST for Launcher Pro 2.8.1 from a solution provider.

oVeRdOsE. · 04-09-2020, 01:48 PM

Thanks shawn.

I must learn to read. I started esys instead of the launcher pro.

Like others mentioned, on the 13' model, I can't get the M logo, even if I have the M pack.

And opening/closing the gate with the keyfob won't work for XX reason, but I can code it... strange.

Other stuff on the cheat sheet are working great.

Bibou19 · 04-23-2020, 09:43 AM

Hi,

I use the launcher 2.8.1 with the psdzsata full 4.21.12.
What is the best version of esys for FDL coding and other for flash ECU

Thx,

shawnsheridan · 04-23-2020, 09:46 AM

Quote:

Originally Posted by Bibou19

Hi,

I use the launcher 2.8.1 with the psdzsata full 4.21.12.
What is the best version of esys for FDL coding and other for flash ECU

Thx,

E-Sys 3.27.1 for Coding and E-Sys 3.3.x for Flashing.

Bibou19 · 04-23-2020, 01:49 PM

Quote:

Originally Posted by shawnsheridan

E-Sys 3.27.1 for Coding and E-Sys 3.3.x for Flashing.

Very Thx Shawn, I thought so, but I wanted to be sure

magpies14 · 04-24-2020, 01:47 AM

Guys, a bit of a long shot, i have a 2013 Sept YM F25 PreLCI and about 2 months back i have upgraded to NBT evo. However , my "so-called" installer told me that i need to upgrade my iLevel of my car inorder to have a working NBT evo.

After he upgraded my ilevel and also installed my NBT evo, i now face a missing function on my vehicle, which is the front aircond dash , lock and unlock button. The hazard light button works but the lock and unlock button is not. I suspect due to upgrading of my ilevel of my Pre LCI that the car thinks it's a LCI vehicle where the lock and unlock button is at the door panel which i don't have.

Anyone here can help find me the parameter or coding to enable back the front dash lock and unlock button again.

note: i have initially thought the button is faulty and replace with another one. Still the same....

Thanks again...

abcpop · 05-12-2020, 11:30 AM

I run windows 10 (version 2004 19041.208)
E-Sys_Setup-3.27.1
ESysLauncherPROSetup_2.8.1_Build_155

E-sys launch well from ESysLauncherPRO but when going into E-sys settings or hitting a menu in Expert Mode (Coding or FA-editor for ex), e-sys closed itself (withour error or crash)

Any one got such problem and could solved it ?
Thanks

shawnsheridan · 05-12-2020, 11:35 AM

Quote:

Originally Posted by abcpop

I run windows 10 (version 2004 19041.208)
E-Sys_Setup-3.27.1
ESysLauncherPROSetup_2.8.1_Build_155

E-sys launch well from ESysLauncherPRO but when going into E-sys settings or hitting a menu in Expert Mode (Coding or FA-editor for ex), e-sys closed itself (withour error or crash)

Any one got such problem and could solved it ?
Thanks

Change Windows to build 1909. You cannot run build 2004.

abcpop · 05-12-2020, 04:02 PM

Shall try to roll back to 1909 but not sure I can.

May be I'll find a fresh PC

Thanks

added 14.05.2020

I confirm it is OK with Windows 1909

dzz · 05-14-2020, 06:38 PM

what is the PsdzData version that I need to use with I-step F25-20-30-520. see pic below?

Dealer updated I-step last week which helped me to get fix for full screen carplay but now I cannot load caf files for FDL coding.

shawnsheridan · 05-14-2020, 08:20 PM

Quote:

Originally Posted by dzz

what is the PsdzData version that I need to use with I-step F25-20-30-520. see pic below?

Dealer updated I-step last week which helped me to get fix for full screen carplay but now I cannot load caf files for FDL coding.

v.4.23.12. PM sent.

evilchargerfan · 05-26-2020, 08:45 AM

has any one successfully coded out edc?

pungo · 05-26-2020, 09:55 AM

Quote:

Originally Posted by evilchargerfan

has any one successfully coded out edc?

I assume you replaced your edc struts with normal struts. Did the stock ones fail?
I've never done it, but have you tried removing the option from FA, VO?

evilchargerfan · 05-27-2020, 04:44 PM

pungo

I did replace my edc struts with koni's

Stocks did not fail, this was simply a choice

I am new to coding outside of Carly, this will be a new venture for me. I believe I have all the right apps downloaded, and purchased the correct cable. Now its a matter of loading up to a laptop, and trying it out. Of course, before doing that ... I'd like to arm myself with as much knowledge as possible.

For starters.... looks like ill be google searching what FA and VO means and how to utilize those in an effort to remove the edc errors

nihad · 06-16-2020, 11:48 AM

Hello

Thanks for this

But am getting this error:

No FP could be generated from FA "". [C002]
Not all elements of the FA were found in the FA2FP: HO-Word UC4G

Using this for BMW x3 2013

E-sys version 3.27.1
psdz Version 5.01.02-2015-8

please advice what should I do?

shawnsheridan · 06-16-2020, 12:09 PM

Quote:

Originally Posted by nihad

Hello

Thanks for this

But am getting this error:

No FP could be generated from FA "". [C002]
Not all elements of the FA were found in the FA2FP: HO-Word UC4G

Using this for BMW x3 2013

E-sys version 3.27.1
psdz Version 5.01.02-2015-8

please advice what should I do?

You are in London. Why do you have HO-Word UC4G?

UC4G is COMBOX CONVERSION FROM 2G TO 4G, US ONLY.

Since you can't use U.S. Combox in Europe, I would just delete HO-Word UC4G.

nihad · 06-16-2020, 12:11 PM

Quote:

Originally Posted by shawnsheridan

You are in London. Why do you have HO-Word UC4G?

UC4G is COMBOX CONVERSION FROM 2G TO 4G, US ONLY.

Since you can't use U.S. Combox in Europe, I would just delete HO-Word UC4G.

Thanks buddy

Now I get this error

No FP could be generated from FA "". [C002]
no FA2FP known for Entwicklungsbaureihe F025 [858]

shawnsheridan · 06-16-2020, 12:17 PM

Quote:

Originally Posted by nihad

Thanks buddy

Now I get this error

No FP could be generated from FA "". [C002]
no FA2FP known for Entwicklungsbaureihe F025 [858]

Are you using Read ECU not Read SVT?

04-09-2020, 01:48 PM	#2734
oVeRdOsE. Lieutenant Colonel 2706 Rep 1,534 Posts Drives: F25 E91 Audi Avnt E90 Cayenne Join Date: May 2018 Location: mtl iTrader: (0)	Thanks shawn. I must learn to read. I started esys instead of the launcher pro. Like others mentioned, on the 13' model, I can't get the M logo, even if I have the M pack. And opening/closing the gate with the keyfob won't work for XX reason, but I can code it... strange. Other stuff on the cheat sheet are working great.
	Appreciate 0 Quote

04-23-2020, 09:43 AM	#2735
Bibou19 New Member 0 Rep 7 Posts Drives: X3 F25 35i Join Date: Oct 2019 Location: Paris iTrader: (0)	Hi, I use the launcher 2.8.1 with the psdzsata full 4.21.12. What is the best version of esys for FDL coding and other for flash ECU Thx,
	Appreciate 0 Quote

04-24-2020, 01:47 AM	#2738
magpies14 Enlisted Member 11 Rep 36 Posts Drives: x3 f25 2.0 diesel Join Date: Jan 2019 Location: Malaysia iTrader: (0)	Guys, a bit of a long shot, i have a 2013 Sept YM F25 PreLCI and about 2 months back i have upgraded to NBT evo. However , my "so-called" installer told me that i need to upgrade my iLevel of my car inorder to have a working NBT evo. After he upgraded my ilevel and also installed my NBT evo, i now face a missing function on my vehicle, which is the front aircond dash , lock and unlock button. The hazard light button works but the lock and unlock button is not. I suspect due to upgrading of my ilevel of my Pre LCI that the car thinks it's a LCI vehicle where the lock and unlock button is at the door panel which i don't have. Anyone here can help find me the parameter or coding to enable back the front dash lock and unlock button again. note: i have initially thought the button is faulty and replace with another one. Still the same.... Thanks again...
	Appreciate 0 Quote

05-12-2020, 11:30 AM	#2739
abcpop Private 0 Rep 80 Posts Drives: F06 650i Xdrive 09/2013 Join Date: Oct 2013 Location: CH iTrader: (0)	I run windows 10 (version 2004 19041.208) E-Sys_Setup-3.27.1 ESysLauncherPROSetup_2.8.1_Build_155 E-sys launch well from ESysLauncherPRO but when going into E-sys settings or hitting a menu in Expert Mode (Coding or FA-editor for ex), e-sys closed itself (withour error or crash) Any one got such problem and could solved it ? Thanks
	Appreciate 0 Quote

05-12-2020, 04:02 PM	#2741
abcpop Private 0 Rep 80 Posts Drives: F06 650i Xdrive 09/2013 Join Date: Oct 2013 Location: CH iTrader: (0)	Shall try to roll back to 1909 but not sure I can. May be I'll find a fresh PC Thanks added 14.05.2020 I confirm it is OK with Windows 1909 Last edited by abcpop; 05-14-2020 at 12:42 AM..
	Appreciate 0 Quote

05-14-2020, 06:38 PM	#2742
dzz Lieutenant 231 Rep 418 Posts Drives: 2015 BMW 535xi, MHD Stage 2+ Join Date: Sep 2018 Location: Virginia iTrader: (0) Garage List 2015 BMW [0.00]	what is the PsdzData version that I need to use with I-step F25-20-30-520. see pic below? Dealer updated I-step last week which helped me to get fix for full screen carplay but now I cannot load caf files for FDL coding. Attached Images
	Appreciate 0 Quote

05-26-2020, 08:45 AM	#2744
evilchargerfan Lieutenant 269 Rep 595 Posts Drives: 2012 F25 (N55), 2014 I01 (REX) Join Date: Oct 2010 Location: San Diego / Menifee iTrader: (1)	has any one successfully coded out edc?
	Appreciate 0 Quote

05-27-2020, 04:44 PM	#2746
evilchargerfan Lieutenant 269 Rep 595 Posts Drives: 2012 F25 (N55), 2014 I01 (REX) Join Date: Oct 2010 Location: San Diego / Menifee iTrader: (1)	pungo I did replace my edc struts with koni's Stocks did not fail, this was simply a choice I am new to coding outside of Carly, this will be a new venture for me. I believe I have all the right apps downloaded, and purchased the correct cable. Now its a matter of loading up to a laptop, and trying it out. Of course, before doing that ... I'd like to arm myself with as much knowledge as possible. For starters.... looks like ill be google searching what FA and VO means and how to utilize those in an effort to remove the edc errors
	Appreciate 0 Quote

06-16-2020, 11:48 AM	#2747
nihad New Member 8 Rep 14 Posts Drives: BMW X3 2013 Join Date: Jun 2020 Location: London iTrader: (0)	Hello Thanks for this But am getting this error: No FP could be generated from FA "". [C002] Not all elements of the FA were found in the FA2FP: HO-Word UC4G Using this for BMW x3 2013 E-sys version 3.27.1 psdz Version 5.01.02-2015-8 please advice what should I do?
	Appreciate 0 Quote