BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
XBimmers | BMW X3 Forum BMW X3 and X4 Forums | F25 (2011 - 2017) | F26 (2014 - Current) Second Generation BMW X3 (F25) General Forum Coding made Easy: A step by step procedure

Post Reply
 
Thread Tools Search this Thread
      06-26-2019, 07:28 AM   #2619
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by GSXRJeff View Post
Shawn, could you please send me the software?
I have a 2012 F25 and a 2014 F25LCI (both 2.0D).
Cheers, Jeff
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      06-26-2019, 09:35 PM   #2620
pungo
Captain
pungo's Avatar
United_States
124
Rep
857
Posts

Drives: 2007 Z4 ///M Coupe
Join Date: Nov 2007
Location: MD

iTrader: (5)

Garage List
I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv
Appreciate 0
      07-01-2019, 12:36 PM   #2621
Cucca1976
New Member
0
Rep
11
Posts

Drives: Bmw x3 f25 futura 2011
Join Date: Feb 2017
Location: Italia

iTrader: (0)

Hi guys. I have a problem with dlw encoding, i get this error, E07c015, what can it depend on? I installed the vibrating motor in the steering, with its module, coded with esys the 5AD the various fdl, icm kombi jbbf cic kafas2 and dsc but does not go. Someone can help me.
thank you
Appreciate 0
      07-01-2019, 08:04 PM   #2622
Almaretto
Major General
Almaretto's Avatar
United_States
1834
Rep
7,610
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by pungo View Post
I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv
Yes, this is expected.
Appreciate 0
      07-03-2019, 12:20 AM   #2623
pungo
Captain
pungo's Avatar
United_States
124
Rep
857
Posts

Drives: 2007 Z4 ///M Coupe
Join Date: Nov 2007
Location: MD

iTrader: (5)

Garage List
Quote:
Originally Posted by pungo View Post
I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv
Quote:
Originally Posted by Almaretto View Post
Yes, this is expected.
Thanks for the conformation, I guess pressing the start button twice is not too bad, I'm getting used to it. Comes in handy when working on the engine and I need to start the car, I can just reach to press the button instead of climbing in to get a foot on the brake pedal
Appreciate 0
      07-08-2019, 08:31 PM   #2624
pungo
Captain
pungo's Avatar
United_States
124
Rep
857
Posts

Drives: 2007 Z4 ///M Coupe
Join Date: Nov 2007
Location: MD

iTrader: (5)

Garage List
Quote:
Originally Posted by Almaretto View Post
Yes, this is expected.
Quote:
Originally Posted by pungo View Post
I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv
Quote:
Originally Posted by pungo View Post
Thanks for the conformation, I guess pressing the start button twice is not too bad, I'm getting used to it. Comes in handy when working on the engine and I need to start the car, I can just reach to press the button instead of climbing in to get a foot on the brake pedal
Now that I've used this a bit, I find that there's some adverse conditions. Say I press the start button once without starting the car, say to listen to the stereo. I'm done listing and want to shut everything off. If I press the start button again, the car will start, where before with the brake=aktiv, everything would simply turn off. Have a to weigh out which way I like better. Just though I'd share the behavior if you plan to set the car to not require the brake to be pressed to start the car.
Appreciate 1
Almaretto1834.00

      07-21-2019, 10:51 AM   #2625
E60525d
Major
E60525d's Avatar
United Kingdom
151
Rep
1,289
Posts

Drives: E90 BMW 330d M Sport LCI
Join Date: Mar 2010
Location: UK

iTrader: (0)

What's the steps for coding SAT to a F25?
Appreciate 0
      07-21-2019, 04:06 PM   #2626
GeoX3
Registered
South Africa
0
Rep
1
Posts

Drives: Bmw X3 F25
Join Date: Jul 2019
Location: RSA

iTrader: (0)

Garage List
2014 BMW X3  [0.00]
Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance

Last edited by GeoX3; 07-21-2019 at 04:20 PM..
Appreciate 0
      07-21-2019, 04:56 PM   #2627
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by GeoX3 View Post
Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-22-2019, 04:33 PM   #2628
zhoudaniell
Private
5
Rep
81
Posts

Drives: 2014 x3
Join Date: Mar 2017
Location: Wisconsin

iTrader: (0)

could you send me the latest setup and coding possibilities? I haven't done it in about 1.5 years, and the main thing I want to do is to be able to hold lock to close my trunk. Would be interested to see if there have been any additional features for coding since my last time around!
Appreciate 0
      07-23-2019, 10:59 AM   #2629
Hank1013F25
Registered
United_States
0
Rep
2
Posts

Drives: 2012 BMW X3 (F25)
Join Date: Jul 2019
Location: Boston, MA

iTrader: (0)

Could someone be kind enough to let me know if I have the KAFAS or KAFAS2 camera? It

Picture here: https://i.redd.it/6qgerkmav1c31.jpg

Currently in a 2012 BMW X3 (F25) and I have an OBDII adapter and Bimmercode. I was considering getting a cable and e-sys to try and code SLI, LDW and FCW but before I do I want to make sure I have the necessary hardware. Do I have the KAFAS or KAFAS 2 camera? At the base of the mirror there is also a white box which I assume is for HBA. Not the white box on the side of the mirror itself used for auto dimming.


So far I've coded:

- Automatically unlock doors when engine shuts off

- Disable all warning messages on iDrive

- Activated Sports Automatic Transmission (cluster says S1, S2, etc. instead of DS now)

- Angel eyes at 100% brightness when low beams on

- Automatically turn on auto high beam assist when lights come on

- Disable driver side seat belt warning (bc if I don't have it on it's for a reason - and I am not driving on roads)

- Disabled speed limits for activating rear and side cams
Appreciate 0
      07-23-2019, 12:06 PM   #2630
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Hank1013F25 View Post
Picture here: https://i.redd.it/6qgerkmav1c31.jpg

Currently in a 2012 BMW X3 (F25) and I have an OBDII adapter and Bimmercode. I was considering getting a cable and e-sys to try and code SLI, LDW and FCW but before I do I want to make sure I have the necessary hardware. Do I have the KAFAS or KAFAS 2 camera? At the base of the mirror there is also a white box which I assume is for HBA. Not the white box on the side of the mirror itself used for auto dimming.


So far I've coded:

- Automatically unlock doors when engine shuts off

- Disable all warning messages on iDrive

- Activated Sports Automatic Transmission (cluster says S1, S2, etc. instead of DS now)

- Angel eyes at 100% brightness when low beams on

- Automatically turn on auto high beam assist when lights come on

- Disable driver side seat belt warning (bc if I don't have it on it's for a reason - and I am not driving on roads)

- Disabled speed limits for activating rear and side cams
SLI and FCW besides requiring KAFAS Camera requires FSC Enabling Codes before it can be coded. LDW requires Dash Switch.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-23-2019, 05:25 PM   #2631
zhoudaniell
Private
5
Rep
81
Posts

Drives: 2014 x3
Join Date: Mar 2017
Location: Wisconsin

iTrader: (0)

Quote:
Originally Posted by GeoX3 View Post
Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance
Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!
Appreciate 0
      07-23-2019, 05:29 PM   #2632
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by zhoudaniell View Post
Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-24-2019, 07:57 PM   #2633
malbec
Enlisted Member
United_States
3
Rep
47
Posts

Drives: X4 M40i Carbon Black
Join Date: Jun 2019
Location: NYC

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
PM sent.
can you share it to me please too
thanks!
Appreciate 0
      07-25-2019, 11:06 AM   #2634
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by malbec View Post
can you share it to me please too
thanks!
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-25-2019, 03:36 PM   #2635
bimmer_gigi
Registered
0
Rep
3
Posts

Drives: f25
Join Date: Jun 2019
Location: Bucharest

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
PM sent.
me too, please.
thanks in advance.
Appreciate 0
      07-25-2019, 03:51 PM   #2636
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by bimmer_gigi View Post
me too, please.
thanks in advance.
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-28-2019, 09:20 AM   #2637
gheron
Registered
0
Rep
2
Posts

Drives: x3 f25
Join Date: Jul 2015
Location: Crotone

iTrader: (0)

esys

Shawn, could you please send me the link for the software Esys?
I have a 2014 F25 xdrive 2.0 xd
Gianni
Appreciate 0
      07-28-2019, 09:56 AM   #2638
shawnsheridan
General
shawnsheridan's Avatar
United_States
3654
Rep
19,741
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by gheron View Post
Shawn, could you please send me the link for the software Esys?
I have a 2014 F25 xdrive 2.0 xd
Gianni
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      07-28-2019, 09:44 PM   #2639
x3sm
Lieutenant
x3sm's Avatar
107
Rep
467
Posts

Drives: X3
Join Date: May 2018
Location: CT

iTrader: (0)

Does anyone how to code the small LCD screen on KOMBI to stay in day-time mode? I hate that it switches to orange in night mode. I tried KOMBI-->3007 KI_Dimmung, 24-->DIM_NACHT_EIN-->Werte=FF and tried to switch it to nicht_aktiv and it still stays orange. Any idea?
__________________
BMW X3 N55 / VMR V705
AUDI S4 / BBS CHR / Borla
Appreciate 0
      07-30-2019, 11:00 PM   #2640
RySe96
Registered
0
Rep
4
Posts

Drives: BMW X3 F25
Join Date: Nov 2018
Location: Pennsylvania

iTrader: (0)

Quote:
Originally Posted by zhoudaniell View Post
Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!
Could I get this as well? Thanks!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:31 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST