04-03-2023, 03:55 AM | #156 |
Enlisted Member
16
Rep 49
Posts |
|
Appreciate
0
|
04-06-2023, 04:23 AM | #158 | |
Registered
0
Rep 3
Posts |
Quote:
I only coded the following modules: BDC/7083, HU_MGU_3E52, SAS3/42C1. Be careful when you start coding! |
|
Appreciate
0
|
04-08-2023, 10:35 AM | #159 |
New Member
2
Rep 17
Posts |
|
Appreciate
0
|
04-08-2023, 12:40 PM | #160 |
Private First Class
63
Rep 159
Posts |
Hello,
I’ve been reading this thread with interest, although I’ve found the coding a struggle to follow because I’ve never done coding. So, what’s the general consensus for Lane Change Assist in the UK, it’s not available off the dealership forecourt? The only way to activate it is through coding? Many thanks, |
Appreciate
0
|
04-08-2023, 03:01 PM | #161 |
Private First Class
64
Rep 178
Posts |
This has been bugging me as my car was not changing lanes either and would just disable the steering assist whilst indicating.
Checked the Drivers Guide app and found the Lane Control Assistant section which helpfully showed the following instructions to enable I’ve just checked in the car and enabled the function, need to check the box automatically adjust speed to route. I’ve not had a try yet, will give it a go tomorrow, but hopefully it will work! Last edited by Mogwai888; 04-08-2023 at 03:20 PM.. |
Appreciate
0
|
04-11-2023, 06:01 PM | #163 |
Enlisted Member
9
Rep 37
Posts |
I have had LCA working perfectly. Now after the latest OTA update, it killed everything. Back in to recode but C_SWA_Land_Aktiv No longer seems to be present in the SAS module after the update. Anyone else had this?
|
Appreciate
0
|
04-12-2023, 04:58 AM | #164 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
05-04-2023, 12:33 PM | #166 |
New Member
2
Rep 17
Posts |
|
Appreciate
0
|
05-08-2023, 02:48 AM | #167 |
Enlisted Member
16
Rep 49
Posts |
|
Appreciate
0
|
06-05-2023, 07:03 AM | #169 |
Private First Class
63
Rep 159
Posts |
Hello,
I still cannot seem to activate the lane change with active route guidance. I’ve definitely checked the box for adjustment to route turned on. Does it have to be coded for UK users? This is going to sound silly, but does the system need to detect traffic both in front and behind your car, in the adjacent lane for it to work? The only times I’ve tried the lane change assist is when it’s been obviously clear and safe to do so, when no traffic (or too far ahead and behind for sensors to detect) is in the adjacent lane if that makes sense? Maybe it’s because I’m being too cautious when trying it out? I turn the indicators on to the direction I want and the driver assistance temporarily turns off with the steering wheel icon greyed out. Many thanks, |
Appreciate
0
|
12-17-2023, 05:20 AM | #170 |
New Member
2
Rep 7
Posts |
Started my first coding at a BMW (iX3 LCI HE 2023)
All changes made via BU incl. BU ODB connector via Lan at Win10 laptop. Enabled 5x blinking when turn signal pressed: H_MGU Turn signal 5x in iDrive menu -> Enabled Lane Change Assist: BDC_Body3 CAFD 7038 3420 PfSarahMaster SpurwechelAssistent -> active HU_MGU SpurWechelAssistent -> active SAS3 C_SWA_Vorhanden -> Nr001-Vorhanden Some codes are changed via Expert Mode and some via comfort mode in BU. I do not known if it was required, but set car in Diagnostic mode (press 3x start/stop w/o pressing the brake). Nothing else activated and no country code adjustment done. If I look at iDrive menu I do not see any country dependency like what I see at Traffic Light Assistent. To confirm after a test drive in NL (Netherlands), 5 times blink and automatic lane change is working by holding the turn indicator for a few seconds. Next challenge: stop and go at traffic lights Last edited by iX3_M_Sport; 12-17-2023 at 11:37 AM.. Reason: Additional info |
Appreciate
0
|
12-17-2023, 11:43 AM | #171 |
New Member
2
Rep 7
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|