[Burr001]

Originally Posted by dinan5m3

I know, you had already shared your wheels on different thread.

Please, specs on those brembo setup NOW !!! And any after install work that needed to get done to accommodate them, or simple plug and play/pray?

Must get rid of the BORING rotors on x3 !!! The cross drilled with yellow calipers FTW...

Originally Posted by dc912

Brembo GT-BM 6 piston calipers with 380mm discs up front with brembo h1000 pads and 370mm(HHC Brakes) rear discs with ebc yellow pads and brembo/goodridge braided lines.

All that was needed was a mounting bracket for the front calipers which comes with the kit. So pretty much plug and play.

Here are the kits with part numbers I think.
FRONTS

http://www.racetechnologies.com/prod...?vehicle=11848

http://www.racetechnologies.com/prod...?vehicle=11848

REARS as per @dc912 HHC made in Taiwan

https://hhcbrakes.com/product/

https://hhcbrakescar.files.wordpress...021/03/bmw.png

BRAKE LINES

Brake lines I can't seem to find....DC912 do you have part numbers?

[dc912]

Originally Posted by Burr001

Here are the kits with part numbers I think.
FRONTS

http://www.racetechnologies.com/prod...?vehicle=11848

http://www.racetechnologies.com/prod...?vehicle=11848

REARS as per @dc912 HHC made in Taiwan

https://hhcbrakes.com/product/

https://hhcbrakescar.files.wordpress...021/03/bmw.png

BRAKE LINES

Brake lines I can't seem to find....DC912 do you have part numbers?

Brake lines for the front was included in the kit. The rears I'll have to ask my mechanic.

[Crudowns]

Why does Turner claim this kit does not fit?

[IAmSpeed]

visualexstasy maybe this is what you need!

[g11hoonigan]

Originally Posted by Crudowns

Why does Turner claim this kit does not fit?

Maybe due to the dust shield? It didn't seem like the OP used the included dust shield.

[Crudowns]

Originally Posted by Adamantio

Hi guys, I just fitted a black M brake kit for G12 M760i on my G01.
395x36 front discs and 398x28 rear discs, all plug and play except the dust covers which do not fit.

How did you solve for the dust covers not working?

[Dasky_spas]

Originally Posted by Adamantio

Hi guys, I just fitted a black M brake kit for G12 M760i on my G01.
395x36 front discs and 398x28 rear discs, all plug and play except the dust covers which do not fit.

How could this work?! You're throwing in way larger rear rotors so how are calipers fitting? The caliper mounts to the knuckle so it doesn't seem to make sense that the rear caliper is able to fit over the 398mm rear.

[g11hoonigan]

Originally Posted by Dasky_spas

How could this work?! You're throwing in way larger rear rotors so how are calipers fitting? The caliper mounts to the knuckle so it doesn't seem to make sense that the rear caliper is able to fit over the 398mm rear.

I believe he said 'kit' so it includes the matching rear calipers. But I don't think the rear rotor size was accurate, should be 370x24mm.

[Dasky_spas]

Originally Posted by g11hoonigan

I believe he said 'kit' so it includes the matching rear calipers. But I don't think the rear rotor size was accurate, should be 370x24mm.

The caliper won't account for the difference though. The caliper location would have to move so if the kit has a bracket to relocate the caliper then that makes sense.

[g11hoonigan]

Originally Posted by Dasky_spas

The caliper won't account for the difference though. The caliper location would have to move so if the kit has a bracket to relocate the caliper then that makes sense.

The kit comes with the bracket that is longer. You can check ECS tuning or other sites for photos and you will see it. And if I'm not mistaken, the rear caliper is basically the same as the regular ones, only with longer/extended bracket. Thus, the pads are the same nonetheless. Same is true with my 740i, the Alpina B7 rear brakes (also 370mm), fit exact the same rear pads as my smaller calipers (and vice-versa).