BMW X3 Forum
BMW X3 Forum
Welcome to the ultimate BMW X3 community.
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Post Reply
 
Thread Tools Search this Thread
      09-06-2020, 02:40 PM   #1
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

X3M Competition with Akrapovic Evo Exhaust - Pics+Video

BIMMERPOST
     Featured on BIMMERPOST.com
I recently installed a full Akrapovic Evo system and wanted to share some pics + thoughts. I have to say that this is my favorite modification to the X3M thus far. It transformed the driving experience and simply makes it sound as it should - angry! A little more immediate throttle response and power increase adds pep to the already capable X3M. As always with Akrapovic, install was plug and play, beyond OE quality and fitment. Stunning build quality, welds, fitment and sound. No drone, very livable for day to day use with the addition of a fantastic growl at higher RPM's. Saves 40+ lbs and the stock valve system transfers over without any fuss.

As with all of my cars, BBS wheels were added as well .

Cold Start Video below - Pics in next post

__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M

Last edited by slicer; 09-06-2020 at 03:30 PM..
Appreciate 9
Max Well4692.00
pluckydks621.50
Lady Jane68987.00
abdulbata299.00
aaa335252.50
ando1954.50
      09-06-2020, 02:41 PM   #2
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Pics of Install +++
Attached Images
                       
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 12
pluckydks621.50
FrankieNuo1210.00
AlexFL7833.00
RoWoX3M401.00
Max Well4692.00
Will Pwr747.50
cfm56d7b5853.50
Poodle64.50
aaa335252.50
F85MTuNED1620.50
      09-06-2020, 02:58 PM   #3
Jerich0
Love to Drive
197
Rep
602
Posts

Drives: X4 & M4
Join Date: Jul 2009
Location: Around

iTrader: (2)

sound clips or it didn't happen!
Appreciate 3
      09-06-2020, 03:00 PM   #4
floating.spirit
Captain
floating.spirit's Avatar
United_States
1017
Rep
840
Posts

Drives: X3M Competition
Join Date: Jul 2018
Location: Washington state

iTrader: (0)

Garage List
2020 X3MC  [0.00]
Congrats! Looks great!
Appreciate 0
      09-06-2020, 03:12 PM   #5
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by Jerich0 View Post
sound clips or it didn't happen!
Cold Start video added to original post
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0
      09-06-2020, 03:14 PM   #6
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by floating.spirit View Post
Congrats! Looks great!
Thank you!
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0
      09-06-2020, 04:49 PM   #7
AlexFL
Brigadier General
7833
Rep
4,607
Posts

Drives: BMW
Join Date: Jun 2019
Location: South Florida

iTrader: (0)

looks good. I would also unplug the asd to fully enjoy the akrapovic.
Appreciate 1
slicer2733.00
      09-06-2020, 07:28 PM   #8
4151zero
HOV clogger
United_States
134
Rep
262
Posts

Drives: ///M5 and i3 BEV
Join Date: Mar 2018
Location: SFO NORCAL

iTrader: (4)

hawtness!
Appreciate 1
slicer2733.00
      09-07-2020, 04:58 AM   #9
DucatiT1098S
Private
DucatiT1098S's Avatar
United_States
162
Rep
79
Posts

Drives: 2020 BMW X3M Comp.
Join Date: Jun 2020
Location: North Carolina Mountains

iTrader: (0)

Garage List
Akrapovic makes some amazing exhaust systems and was my first choice but ended up with Dinan.
What a difference an exhaust makes
Appreciate 1
slicer2733.00
      09-07-2020, 10:41 AM   #10
noushy
///M Fan
noushy's Avatar
1650
Rep
1,490
Posts

Drives: M8 Comp, X5M Comp, iX M60
Join Date: Jul 2012
Location: Orchard Lake, Mi

iTrader: (1)

Yes nice setup I have this on my X3M and the full evo on my M8 as well. Not sure if the added midpipes are equal to a full evo system (due to certifications) since this is the first lower end M car I have owned and Akra doesnt do evo systems for them. Usually the evo system matches the factory with additional silencers equivalent to the factory setup. My midpipes for the x3m were essentially straight pipes. Anyways still love the sound and a big improvement over stock in sound and appearance. Curious your thoughts on BBS wheels as they are well made but not always the lightest. I ended up with Vossen for the first time as I usually do HRE.

Noushy
Attached Images
 
__________________
2019 BMW X5 50i Mineral White/Tartufo all options including M Sport
2022 Porsche 911 C4S Silver/Brown
2023 BMW iX M60 Black Sapphire/Amido, Titanium Bronze trim/22
2023 Audi RS6 Avant Daytona Gray/Black
2024 BMW X5M Comp Brooklyn Gray/Taruma Brown, Titanium Exhaust on order
Appreciate 5
      09-07-2020, 12:09 PM   #11
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by noushy View Post
Yes nice setup I have this on my X3M and the full evo on my M8 as well. Not sure if the added midpipes are equal to a full evo system (due to certifications) since this is the first lower end M car I have owned and Akra doesnt do evo systems for them. Usually the evo system matches the factory with additional silencers equivalent to the factory setup. My midpipes for the x3m were essentially straight pipes. Anyways still love the sound and a big improvement over stock in sound and appearance. Curious your thoughts on BBS wheels as they are well made but not always the lightest. I ended up with Vossen for the first time as I usually do HRE.

Noushy
I'm a big BBS fan and if you look at my post history I have posted pics of many sets on my other cars. I am new to the X3M section of the forum but have been around since 2009 (mostly in the e9x M3 section). Many BMW's and BBS wheels.

The LM isn't the lightest wheel in their lineup but it's certainly lighter than the OE wheels, forged and very strong. BBS makes some of the lightest wheels on the planet (lighter than HRE and other Forged wheels). The FI-R in particular is insanely light, as well as their forged magnesium wheel for Porsche. Additionally BBS uses a Die forging process which presses the wheels in their rough shape. They then machine the details. This effectively creates a stronger wheel. Companies like HRE machine their wheels out of a forged blank. No die involved. The die forging process is far more expensive on the front end and ultimately yields a superior product.

As far as the "EVO" nomenclature, I believe that's what Akrapovic calls this system. You are right that often their "EVO" kits delete the primary catalytic converters. In this instance the primaries remain in place as they are integrated into the down-pipes. We shall see if they add down pipes in the future.

Which diffuser do you have on your car? Looks good!
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 1
      09-07-2020, 12:34 PM   #12
Will Pwr
eM Power Me
Will Pwr's Avatar
748
Rep
698
Posts

Drives: '23 AW i4 eDrive40 M Sport
Join Date: Apr 2006
Location: So Cali

iTrader: (2)

Garage List
__________________
Will -
'23 Alpine White G26 ///i4 eDrive40 M Sport
'23 Brooklyn Grey G20 ///330e M Sport
'20 Alpine White F97 ///X3MC
'20 Alpine White F39 ///X2 M Sport X
Appreciate 0
      09-07-2020, 01:33 PM   #13
noushy
///M Fan
noushy's Avatar
1650
Rep
1,490
Posts

Drives: M8 Comp, X5M Comp, iX M60
Join Date: Jul 2012
Location: Orchard Lake, Mi

iTrader: (1)

Quote:
Originally Posted by slicer View Post
Quote:
Originally Posted by noushy View Post
Yes nice setup I have this on my X3M and the full evo on my M8 as well. Not sure if the added midpipes are equal to a full evo system (due to certifications) since this is the first lower end M car I have owned and Akra doesnt do evo systems for them. Usually the evo system matches the factory with additional silencers equivalent to the factory setup. My midpipes for the x3m were essentially straight pipes. Anyways still love the sound and a big improvement over stock in sound and appearance. Curious your thoughts on BBS wheels as they are well made but not always the lightest. I ended up with Vossen for the first time as I usually do HRE.

Noushy
I'm a big BBS fan and if you look at my post history I have posted pics of many sets on my other cars. I am new to the X3M section of the forum but have been around since 2009 (mostly in the e9x M3 section). Many BMW's and BBS wheels.

The LM isn't the lightest wheel in their lineup but it's certainly lighter than the OE wheels, forged and very strong. BBS makes some of the lightest wheels on the planet (lighter than HRE and other Forged wheels). The FI-R in particular is insanely light, as well as their forged magnesium wheel for Porsche. Additionally BBS uses a Die forging process which presses the wheels in their rough shape. They then machine the details. This effectively creates a stronger wheel. Companies like HRE machine their wheels out of a forged blank. No die involved. The die forging process is far more expensive on the front end and ultimately yields a superior product.

As far as the "EVO" nomenclature, I believe that's what Akrapovic calls this system. You are right that often their "EVO" kits delete the primary catalytic converters. In this instance the primaries remain in place as they are integrated into the down-pipes. We shall see if they add down pipes in the future.

Which diffuser do you have on your car? Looks good!
Factory M performance part but beware quite pricey. On a side note BBS makes the wheels for Alpina and my B7 had forged wheels from them.

Noushy
__________________
2019 BMW X5 50i Mineral White/Tartufo all options including M Sport
2022 Porsche 911 C4S Silver/Brown
2023 BMW iX M60 Black Sapphire/Amido, Titanium Bronze trim/22
2023 Audi RS6 Avant Daytona Gray/Black
2024 BMW X5M Comp Brooklyn Gray/Taruma Brown, Titanium Exhaust on order
Appreciate 1
      09-07-2020, 01:41 PM   #14
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by noushy View Post
Quote:
Originally Posted by slicer View Post
Quote:
Originally Posted by noushy View Post
Yes nice setup I have this on my X3M and the full evo on my M8 as well. Not sure if the added midpipes are equal to a full evo system (due to certifications) since this is the first lower end M car I have owned and Akra doesnt do evo systems for them. Usually the evo system matches the factory with additional silencers equivalent to the factory setup. My midpipes for the x3m were essentially straight pipes. Anyways still love the sound and a big improvement over stock in sound and appearance. Curious your thoughts on BBS wheels as they are well made but not always the lightest. I ended up with Vossen for the first time as I usually do HRE.

Noushy
I'm a big BBS fan and if you look at my post history I have posted pics of many sets on my other cars. I am new to the X3M section of the forum but have been around since 2009 (mostly in the e9x M3 section). Many BMW's and BBS wheels.

The LM isn't the lightest wheel in their lineup but it's certainly lighter than the OE wheels, forged and very strong. BBS makes some of the lightest wheels on the planet (lighter than HRE and other Forged wheels). The FI-R in particular is insanely light, as well as their forged magnesium wheel for Porsche. Additionally BBS uses a Die forging process which presses the wheels in their rough shape. They then machine the details. This effectively creates a stronger wheel. Companies like HRE machine their wheels out of a forged blank. No die involved. The die forging process is far more expensive on the front end and ultimately yields a superior product.

As far as the "EVO" nomenclature, I believe that's what Akrapovic calls this system. You are right that often their "EVO" kits delete the primary catalytic converters. In this instance the primaries remain in place as they are integrated into the down-pipes. We shall see if they add down pipes in the future.

Which diffuser do you have on your car? Looks good!
Factory M performance part but beware quite pricey. On a sidenote PBS makes the wheels for Alpena and my B7 had forged wheels from them.

Noushy
Yes, they make a lot of wheels for OEM's. Plus of course they are a leader in wheels for pro road racing.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0
      09-07-2020, 01:56 PM   #15
r33_RGSport
General
r33_RGSport's Avatar
United_States
12805
Rep
18,628
Posts

Drives: G09 XM, G05 X5 40, 991.2 T
Join Date: Oct 2009
Location: So. Cal

iTrader: (6)

Looking good.
I just wish I can get the mid-pipe in CARB controlled state.
__________________
Email:sales@rgsport.com | IG:RGSport_USA | Web:RGSportShop.com
March SALES!! Evolution Racewerks - Until 04/01 | PM for DEALS
MSS • iSweep • RaceChip • Sterckenn • AutoTecknic • Akrapovic • Vossen Wheels • Eventuri
Active Autowerke • KW • H&R • Ohlins • Remus • and more...
Appreciate 1
noushy1650.00
      09-07-2020, 02:01 PM   #16
noushy
///M Fan
noushy's Avatar
1650
Rep
1,490
Posts

Drives: M8 Comp, X5M Comp, iX M60
Join Date: Jul 2012
Location: Orchard Lake, Mi

iTrader: (1)

Quote:
Originally Posted by r33_RGSport View Post
Looking good.
I just wish I can get the mid-pipe in CARB controlled state.
Thats the problem with non-evo setup. The Evo setup usually is CARB approved as well (50 state)

Noushy
__________________
2019 BMW X5 50i Mineral White/Tartufo all options including M Sport
2022 Porsche 911 C4S Silver/Brown
2023 BMW iX M60 Black Sapphire/Amido, Titanium Bronze trim/22
2023 Audi RS6 Avant Daytona Gray/Black
2024 BMW X5M Comp Brooklyn Gray/Taruma Brown, Titanium Exhaust on order
Appreciate 1
r33_RGSport12805.00
      09-07-2020, 03:16 PM   #17
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by r33_RGSport View Post
Looking good.
I just wish I can get the mid-pipe in CARB controlled state.
I didn't realize you can't get the mid pipe in CA. One of the perks of being located in WI.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 2
r33_RGSport12805.00
noushy1650.00
      09-09-2020, 09:07 AM   #18
NYAWE60
Captain
NYAWE60's Avatar
650
Rep
775
Posts

Drives: 2008 Porsche 911 Turbo 6 speed
Join Date: Jan 2011
Location: NYC

iTrader: (0)

My oh my thats pretty.
__________________
2008 997TT 6-Speed - stock (for now, just enjoying)
2019 Audi S5 Sportback JB4 equipped - mommy mobile
2011 X5M - daily family hauler
2010 Toyota Prius - stealth mobile 140K miles since new and still 45 MPG
2017 Lexus GX460 - (gone) - easily one of the most reliable cars I?ve ever owned
2014 328i xDrive M-Sport - 270 WHP w/JB4 (gone)
2010 BMW 535i RWD - 400 WHP (gone)
1992 R32 Nissan Skyline GTR 500 WHP (gone)
1993 Toyota Supra TT 6 speed - 500 WHP (gone)
Appreciate 1
slicer2733.00
      09-09-2020, 09:10 AM   #19
spuntyb
Brigadier General
spuntyb's Avatar
United_States
4052
Rep
4,977
Posts

Drives: 2019 F90 Competition
Join Date: Aug 2013
Location: USA

iTrader: (0)

Are you running a tune as well, or stock?
__________________
<b>2023 M5C SRG|Aragon || 2018 Macan GTS</b>

2019 F90 Comp MBB|Black (sold)
2018 F80 ZCP TB|SS (sold)
2015 F30 335 AW|CR (sold)
2015 F31 MG|CR (sold)
2011 E90 JB|Oyster (sold)
Appreciate 1
slicer2733.00
      09-09-2020, 09:18 AM   #20
Steveo
Captain
Steveo's Avatar
147
Rep
701
Posts

Drives: M4
Join Date: May 2009
Location: Earth

iTrader: (0)

Love the Akro's

Sounds exactly like my stock M4CS exhaust on cold start up
Appreciate 1
slicer2733.00
      09-09-2020, 09:22 AM   #21
Lady Jane
Cailín gan eagla.
Lady Jane's Avatar
68987
Rep
980
Posts

Drives: 2024 X3 M40i and R1200RT bike.
Join Date: Mar 2020
Location: Atlantic Canada.

iTrader: (0)

Attachment 2409258

Last edited by Lady Jane; 01-06-2022 at 05:10 PM..
Appreciate 1
slicer2733.00
      09-09-2020, 09:27 AM   #22
kc52ar
AR
kc52ar's Avatar
United_States
80
Rep
182
Posts

Drives: 13 M3 Fzn Wht, 21 M340i xDrv
Join Date: May 2008
Location: SF, Mercer Island

iTrader: (1)

Thumbs up

Quote:
Originally Posted by slicer View Post
I recently installed a full Akrapovic Evo system and wanted to share some pics + thoughts. I have to say that this is my favorite modification to the X3M thus far. It transformed the driving experience and simply makes it sound as it should - angry! A little more immediate throttle response and power increase adds pep to the already capable X3M. As always with Akrapovic, install was plug and play, beyond OE quality and fitment. Stunning build quality, welds, fitment and sound. No drone, very livable for day to day use with the addition of a fantastic growl at higher RPM's. Saves 40+ lbs and the stock valve system transfers over without any fuss.

As with all of my cars, BBS wheels were added as well .

Cold Start Video below - Pics in next post


That exhaust (Full Akrapovic Evo) sounds menacing
__________________
Appreciate 2
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:35 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST