[r33_RGSport]

Originally Posted by Rah233

Is it still possible have EDC fromt the center console after installing MSS or H&R? Kinda think the stock ride is too harsh but don't want to lose the EDC function.

Yes, EDC still in-tact since you are not changing the shock.

[2SG5]

Originally Posted by r33_RGSport

11mm or 12mm at stock height, stock tire sizes.
15mm lowered with stock tire sizes.

Got them all in stock.

Just placed an order for H&R Springs and 15mm spacers.

[r33_RGSport]

Originally Posted by 2SG5

Just placed an order for H&R Springs and 15mm spacers.

Thank you for your business.

[2Times]

Good info here... sounds like MSS for ride quality and handling but for the extra cost.

[Spoolin55]

Originally Posted by r33_RGSport

11mm or 12mm at stock height, stock tire sizes.
15mm lowered with stock tire sizes.

Got them all in stock.

Cool so the consensus is 15mm all the way around on h&r with the stock tire setup?

How much wider on the tire can you go? I want to go Michelin after these Conti's burn up eventually...

[r33_RGSport]

Originally Posted by Spoolin55

Cool so the consensus is 15mm all the way around on h&r with the stock tire setup?

How much wider on the tire can you go? I want to go Michelin after these Conti's burn up eventually...

Most guys uses 265 / 295 setup.

[aeaustinG20]

Finally installed MSS springs and 12mm H&R spacers. Very happy with fit and driving feel. Letting them settle completely and then may take in for small adjustments.

[dooo]

Anyone experiencing rear struts leaking after lowering spring?

[95wildtt]

Originally Posted by dooo

Anyone experiencing rear struts leaking after lowering spring?

Here's a post about this topic:
https://x3.xbimmers.com/forums/showthread.php?t=2002326

[anthemavm]

Originally Posted by r33_RGSport

Most guys uses 265 / 295 setup.

@r33_RGSport installed my MSS Springs and spacers.

[Nippa]

Here's mine lowered on MSS with 15mm all around.

[imran83]

Originally Posted by Nippa

Here's mine lowered on MSS with 15mm all around.

Hi Nippa - what settings do you have on your MSS front and back? Stance is on point.

[Nippa]

Originally Posted by imran83

Hi Nippa - what settings do you have on your MSS front and back? Stance is on point.

Hi imran83 ,

I actually tried the 15mm(rear thread gap)/5mm(front thread gap) however the back was too low to get properly aligned, so i went with what r33_RGSport recommended in his thread about the MSS.

So ended up with 20mm Rear and 5mm Front.

[imran83]

Originally Posted by Nippa

Hi imran83 ,

I actually tried the 15mm(rear thread gap)/5mm(front thread gap) however the back was too low to get properly aligned, so i went with what r33_RGSport recommended in his thread about the MSS.

So ended up with 20mm Rear and 5mm Front.

Thanks! How long did it take to settle? I did 20mm rear and 5 front, but the rear is definitely lower than the front. Been about 400 miles thus far and I bought this set of MSS springs used.

[Nippa]

Originally Posted by imran83

Thanks! How long did it take to settle? I did 20mm rear and 5 front, but the rear is definitely lower than the front. Been about 400 miles thus far and I bought this set of MSS springs used.

I also got mine used, if i remember correctly it didnt take long to settle but as i dont drive much that may have also delayed the process.