03-04-2021, 02:11 PM | #1 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Another Hitch thread
I have an X3 2014 28i and I am getting a hitch installed. The company I am having do the install does not want to touch the wiring. Go see BMW they say. I searched the forums but cannot seem to find information on the wiring harness side of things. Anyone had experience tackling this part of the hitch install? Thanks in advance!
|
03-07-2021, 12:21 PM | #2 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Bump.. anyone have experience with the wiring?
|
Appreciate
0
|
03-08-2021, 02:06 AM | #3 |
Private
11
Rep 77
Posts |
Not sure what hitch you got. But this is from stealthhitches website (their wiring harness). Look at the pdf on the left hand side.
https://stealthhitches.com/products/...onandoperation |
Appreciate
0
|
03-08-2021, 07:02 AM | #4 |
General of the Space Forces
171
Rep 721
Posts |
I have an OEM wiring harness I haven't installed yet, was going to use these instructions
__________________
Current: 2020 X5 x40i M-Sport, Arctic Grey Metallic / Ivory White, Executive Package, Luggage Compartment Package, Integral Active Steering, Tow Package, Parking Assist Package, Driving Assist Package, M-Sport brakes, Tux Mats
|
Appreciate
0
|
03-08-2021, 11:13 AM | #5 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Thank you so much everyone!! This is exactly what I needed. Cheers!
|
Appreciate
0
|
03-10-2021, 12:46 PM | #6 |
Enlisted Member
6
Rep 32
Posts
Drives: 13 X3 35i M | 09 Mazda RX8 R3
Join Date: Feb 2021
Location: Victoria, BC Canada
|
|
Appreciate
0
|
03-11-2021, 10:43 AM | #7 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
I dont believe it will involve cutting the trim. I am going to buy the hitch at Rack Attack. They charge around $600 all in for the hitch plus install. I dont really want to tackle the install myself, so I am OK with the cost. That is for a class three hitch as well, 2" receiver.
|
Appreciate
0
|
03-11-2021, 03:25 PM | #8 |
Private
11
Rep 77
Posts |
This is my torklift central eco stealth hitch with kuat bike rack. Picked up my new 2 wheels last week. A small oval cut was needed for the bottom rear trim. Kept that oem look. The tow adapter I can take off when not in use.
|
Appreciate
0
|
03-11-2021, 04:01 PM | #9 |
Private First Class
65
Rep 195
Posts
Drives: BMW,Tesla, etc.
Join Date: Jun 2017
Location: Cincinnati, OH
|
Got a curt hitch....came with the vehicle, and have the same bike rack as ALPx3
|
Appreciate
0
|
03-11-2021, 05:13 PM | #10 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Thanks for the photo! Once I order mine up, I will certainly post a pic!
|
Appreciate
0
|
03-12-2021, 10:05 AM | #11 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Appointment booked for Tuesday March 30th.
|
Appreciate
0
|
03-12-2021, 12:21 PM | #12 |
Enlisted Member
6
Rep 32
Posts
Drives: 13 X3 35i M | 09 Mazda RX8 R3
Join Date: Feb 2021
Location: Victoria, BC Canada
|
|
Appreciate
0
|
03-12-2021, 12:33 PM | #14 |
Enlisted Member
6
Rep 32
Posts
Drives: 13 X3 35i M | 09 Mazda RX8 R3
Join Date: Feb 2021
Location: Victoria, BC Canada
|
|
Appreciate
0
|
03-15-2021, 04:47 PM | #15 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
|
Appreciate
0
|
03-15-2021, 04:57 PM | #16 |
Enlisted Member
6
Rep 32
Posts
Drives: 13 X3 35i M | 09 Mazda RX8 R3
Join Date: Feb 2021
Location: Victoria, BC Canada
|
|
Appreciate
0
|
03-17-2021, 12:07 PM | #17 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
|
Appreciate
0
|
03-22-2021, 11:37 AM | #18 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Wow.. getting the wiring done has turned into a thing.. I have found online a Curt flat 4 trailer harness, doesnt seem too difficult to install. Some splicing required, but thats not a big deal. Members on here have posted the manual for a couple options, including the BMW OEM part install. Anyone have experience installing a Curt or something similar?
BMW just quoted me $400+ for the wiring harness and $400+ for the control unit plus another $400 for install.. seems really effing steep! |
Appreciate
0
|
05-04-2021, 01:55 PM | #20 |
Enlisted Member
11
Rep 32
Posts
Drives: 2014 X3 28i
Join Date: Mar 2021
Location: Greater Victoria, BC
|
Hi! I did NOT.. it ended up just not making sense cost wise. VCM was super helpful and after all the research and calling around I did, I would use them in a heartbeat.
I did end up making a bunch of programming changes to my X3 though. There is a local guy that does it for $80/hr. When I priced out my time and the cable etc, it was a no brainer. We did a bunch of changes, Added bluetooth audio streaming Open/Close the tailgate from the fob and the button at the dash Turned off the warning on start up Unlock all doors when engine shut off Open and close all windows via the fob And a couple other little things. Was WELL worth it. |
Appreciate
0
|
05-11-2021, 02:15 PM | #21 | |
New Member
0
Rep 6
Posts
Drives: 2016 BMW X3 MSport trim
Join Date: May 2021
Location: Halifax, Nova Scotia, Canada
|
Quote:
That looks pretty sick. Kinda wish mine was also white to color match a rack like that. My X3 is black so it'll color match anything, but that's kinda boring... |
|
Appreciate
0
|
05-11-2021, 05:11 PM | #22 |
Lieutenant Colonel
806
Rep 1,905
Posts |
...speaking of BIKE RACKS, anyone here have any experience with racks made by "Kuat"?....their 'Beta' rack looks interesting, simple clean design and reasonably priced:
Beta rack: https://www.kuat.com/product/beta/ Thanks/Bill |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|