[nyalpine90]

Is it possible to get screen mirror coded on G01 with small screen?

[Campro435]

Originally Posted by titomi

When I code "Christmas" as a startup animation, I get M animation instead. Anyone else?

Same here

[Campro435]

Originally Posted by kevinkay

With Gugin's help I added tire temp to Idrive
HU_NBT 3001
RDC_DRUCK_TEMP - druck_und_temperatur

Anyone else with Temp display show the left front always hotter? Show this way on mine with both summer and winter wheels. Always 2 to 3 degrees hotter. Should I be concerned?

[Robwheeler]

Anyone know how to disable the non contact (kick sensor) for tailgate operation?

[titomi]

Originally Posted by Robwheeler

Anyone know how to disable the non contact (kick sensor) for tailgate operation?

Can't be coded out afaik.

[diggs]

I don’t have ambient lighting, but there are LEDs under the wood door panel which you can see if you look into the gap underneath. Does anyone know if these can be turned on?

In the pic here, the LEDs are in the same place as the lower light strip in orange.

https://x3.xbimmers.com/forums/attachment.php?attachmentid=1826136&stc=1&d=152657 9402

[GoodGuyAvi]

Originally Posted by cvee

I finally got to test a DVD....... but unfortunately it didn’t work.
I could hear the audio, but not see video.

Before I tested it.... I removed the volume popup which required me to reactivate vim by holding IDrive controller forward.
Then I set default volume to 20% which also required me to activate vim.

Then I went for drive and DVD screen was locked out.

How can I deactivate vim? Just set to disabled and code.
Then re-enable and code?
——————————-
Update

I deactivated and then reavtivated VIM.

The screenshot below displays on phone app after instructed to hold iDrive controller forward.

https://photos.google.com/share/AF1Q...RPWjFwelZQQnlR

In my case iDrive is in the same ‘multimedia’ spot it was when I started coding.
I cannot perform the step to disable speedlock.

On previous attempts I breezed through that step and did not read it correctly.

Who has used BC to disable VIM?
Did you see the speedlock screen?

Continue HOLDING UP!!!

[6ixSpd]

Originally Posted by 6ixSpd

Has anyone successfully changed out TPMS to FTM? Was it just a coding change or did any modules/fuses have to be disconnected as well?

Anyone?

[Robwheeler]

Originally Posted by titomi

Can't be coded out afaik.

Can you access BDC_BODY2 in expert mode?

Want to change VAM_SMART_OPENER and see if that will disable it

[AJFord]

Originally Posted by chicagofan00

Just buy it already!

As above, yes, 1-7 can easily be done with 8 being done using expert mode as someone has posted on here how to do it. The last one I'm not sure if they would be possible at all.

Don't suppose you know where I can find the setting to activate number 7 from this list do you? (Start the car in Sport individual mode) Have had a look through all the ECU's and can't see the option. Thanks

[ANM8]

For that option the following control unit has to be available in the car: “Body Domain Controller” BDC

https://bimmercode.app/cars/bmw/x3-x3-m/g01/

[Bristle Hound]

Anyone found the optimum mirror percentage dip when using the mirror dip on the offside exterior mirror when in reverse?

I noticed on BC that its in 10% increments

I've found the factory setting dips too far

[ANM8]

Mine is set at 60% I find it about right. You get a decent kerb view without losing to much overall view

[chicagofan00]

Originally Posted by AJFord

Don't suppose you know where I can find the setting to activate number 7 from this list do you? (Start the car in Sport individual mode) Have had a look through all the ECU's and can't see the option. Thanks

Originally Posted by ANM8

For that option the following control unit has to be available in the car: "Body Domain Controller" BDC

https://bimmercode.app/cars/bmw/x3-x3-m/g01/

Yep, it's in the BDC unit of BimmerCode.

[titomi]

Originally Posted by Bristle Hound

Anyone found the optimum mirror percentage dip when using the mirror dip on the offside exterior mirror when in reverse?

I noticed on BC that its in 10% increments

I've found the factory setting dips too far

That's a tricky questions, because of ones hight and seating position. That said, I've got it at 70, but didn't tried another options.

[AJFord]

Originally Posted by chicagofan00

Yep, it's in the BDC unit of BimmerCode.

Thank you for the replies ANM8 and chicagofan00. Looks like the Vgate adapter i'm using doesn't support coding the BDC

[ANM8]

I use the Scantool Obdlink mx+ but there is a list of recomended adapters on the Bimmercode website.

[AJFord]

Originally Posted by ANM8

I use the Scantool Obdlink mx+ but there is a list of recomended adapters on the Bimmercode website.

I know yeah, I bought mine when I had my F32 (and the vgate was a recommended adapter! ) but can't be bothered buying another one just for a few coding options. Guess I'll just have to continue manually pushing the Sport button like a peasant! 😂

[popopine]

I find the cluster in sports mode easier to read than the traditional readout in comfort. is there a way to code it so I can stay in comfort sitting, but always displays large numerical readout?

thx for your time.

[GoodGuyAvi]

Originally Posted by popopine

I find the cluster in sports mode easier to read than the traditional readout in comfort. is there a way to code it so I can stay in comfort sitting, but always displays large numerical readout?

thx for your time.

Yes switch to sport individual.
Set up everything on comfort there

With bimmer code made your individual mode be default with startup

[jlin101]

Originally Posted by AJFord

Don't suppose you know where I can find the setting to activate number 7 from this list do you? (Start the car in Sport individual mode) Have had a look through all the ECU's and can't see the option. Thanks

Have you tried setting Bimmercode/BDC/Default Driving Mode in Sport, then switching to Sport Individual using the console button? When you start the car next time, it will remember the last Sport Mode used.

[AJFord]

Originally Posted by AJFord

Thank you for the replies ANM8 and chicagofan00. Looks like the Vgate adapter i'm using doesn't support coding the BDC

Originally Posted by jlin101

Have you tried setting Bimmercode/BDC/Default Driving Mode in Sport, then switching to Sport Individual using the console button? When you start the car next time, it will remember the last Sport Mode used.

Thanks for the reply mate but already got to the bottom of it (see message above). Sad times for me