08-08-2024, 10:30 AM | #3719 |
Registered
0
Rep 2
Posts |
Need to get my sunroof for 2011 BMW X3 28i programmed. It was showing on the scanner that it had some error and my mechanic accidentally cleared the codes. Can anyone guide me to a cheaper option? Thanks
|
Appreciate
0
|
08-08-2024, 11:41 AM | #3720 |
General
11012
Rep 43,280
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Program it with E-Sys. PM sent.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
09-15-2024, 05:28 AM | #3721 |
New Member
1
Rep 18
Posts |
Hi
I've recently retrofitted comfort seats with lumbar, heating and memory and electric trunk on my F10 530dx (European version). Everything works fine, except for the seats heating. The check with BimmerLink gets the following errors: 00 Junction Box Electronics 1 error 030195: FH BFH: invalid characteristic, no standardization available 01 Crash Safety Module 1 error 930B8F: Passenger SBR sensor - interruption 02 Switch center, steering column 1 error 803407: Electric steering column adjustment (ELSV), cable to button: short circuit to positive or cable break 72 Footwell module 3 errors 800FA0: ELSV Hall sensor horizontal adjustment Short circuit to ground 800F9C: ELSV Hall sensor vertical adjustment Short circuit to ground 800E88: Inconsistency: HW coding and SW coding implausible 78 Integrated automatic heating / air conditioning system 6 errors 8011BB: Stratification potentiometer on the right: short circuit to plus or interruption 801253: eKMV: Power reduction in cooling or heating operation through power management 801222: Compressor: shutdown due to lack of DME approval E70C25: AC-LIN-1: Motor in the rear left footwell does not respond, Bus Error Slave 8 E70C26: AC-LIN-1: Motor in the rear right footwell does not respond, Bus Error Slave 9 E70C29: AC-LIN-1: Motor stratification, rear left, does not respond, bus error slave 13 It must be said that the donor vehicle is F10 550ix Prod. Date 2010-11-10, equipped, inter alia, with S4NB Autom. Climate Control With 4-Zone. Mine was equipped with base seats and 2-Zone clima 1) I was wondering if you have solved the problem with the stearing column (error in orange) 2) the errors in green I think are related to the different configuration of clima: how can I solve with coding? 3) the error in purple is related to the different sensor type: the donor car was equipped with 3 wires type (bus, "+" and "-"), mine with 2 wire type (+ and -). I inserted the + and - of the donor car on the same pins occupied by my wires in the ACSM, but evidently it doesen't work. I read as alternative solution that I could code my passenger seat as M5, that doesn't have occupancy sensor, but I don't know how to do that; 4) the remaining errors I think are related with CAFD problems, but I don't know how to find the right CAFD's and inject them on the right ECUs shawnsheridan can you help me please? |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|