[shawnsheridan]

Originally Posted by dpham1

It does have BKombi when I read SVT but failed to Read Coding Data of BKombi?

Do you know what's wrong?

Thanks mate!

Delete BKombi from SVT using SVT Editor, and go into E-Sys => VCM, File Tab at Bottom, and on bottom right under SVT Target, you loaded the Edited SVT file, and then select Master Tab at Bottom, and "Write SVT"

Read (ECU) and you should see KOMBI appear.

[dpham1]

Originally Posted by shawnsheridan

Delete BKombi from SVT using SVT Editor, and go into E-Sys => VCM, File Tab at Bottom, and on bottom right under SVT Target, you loaded the Edited SVT file, and then select Master Tab at Bottom, and "Write SVT"

Read (ECU) and you should see KOMBI appear.

How do I get the Edited SVT file that I need to load ?

[shawnsheridan]

Originally Posted by dpham1

How do I get the Edited SVT file that I need to load ?

Read SVT and Edit it in SVT Editor.

[dpham1]

Originally Posted by shawnsheridan

Read SVT and Edit it in SVT Editor.

Got it, the SVT file that has been BKombi-Deleted

Thanks dude!

[shawnsheridan]

Originally Posted by dpham1

Got it, the SVT file that has been BKombi-Deleted

Thanks dude!

[dpham1]

Originally Posted by shawnsheridan

I did exactly what you told me but still couln't manage to do it. I'm wondering if I have missed something regards to installation (maybe a connector or something)

When I wrote SVT, it states " the following ECUs have wrong bus ID: FEM_GW, FEM_Body, SM2, REM, IHKA3, HU Entry" (you can see the attachments)" but I wrote anyways

After writing Edited SVT file, I read ECUs again but still cant see KOMBI (you can see the attached picture)

What could have I missed?

Thanks dude!

[shawnsheridan]

Originally Posted by dpham1

I did exactly what you told me but still couln't manage to do it. I'm wondering if I have missed something regards to installation (maybe a connector or something)

When I wrote SVT, it states " the following ECUs have wrong bus ID: FEM_GW, FEM_Body, SM2, REM, IHKA3, HU Entry" (you can see the attachments)" but I wrote anyways

After writing Edited SVT file, I read ECUs again but still cant see KOMBI (you can see the attached picture)

What could have I missed?

No idea on BUS ID error. Never see that before.

Are you using Read ECU? Is Kombi MOST Bus connected?

[dpham1]

Originally Posted by shawnsheridan

No idea on BUS ID error. Never see that before.

Are you using Read ECU? Is Kombi MOST Bus connected?

I used Read ECU as you instructed, I think you are correct about Most Bus Connector since I didn't have this connector when installed, have to ask the seller I guess.

Thanks dude!

[harveje]

in svt editor expand the modules in question and see what is in the ecubusconnectioninfo space..

[bycomputers]

Who want to teach me how to flash and coding the BMW unit.
I will pay you .
Thanks

[dpham1]

Originally Posted by dpham1

I did exactly what you told me but still couln't manage to do it. I'm wondering if I have missed something regards to installation (maybe a connector or something)

When I wrote SVT, it states " the following ECUs have wrong bus ID: FEM_GW, FEM_Body, SM2, REM, IHKA3, HU Entry" (you can see the attachments)" but I wrote anyways

After writing Edited SVT file, I read ECUs again but still cant see KOMBI (you can see the attached picture)

What could have I missed?

Thanks dude!

Attachment 2901880

Attachment 2901881

Hi Shawn,

When I open e-sys luancher, it states that my EST Software Token is invalid so I couldn't open the software.

I remember that after June we have a new software or something to launch e-sys so Please tell me what I need to do to get e-sys working again?

Many thanks dude!

[shawnsheridan]

Originally Posted by dpham1

Hi Shawn,

When I open e-sys luancher, it states that my EST Software Token is invalid so I couldn't open the software.

I remember that after June we have a new software or something to launch e-sys so Please tell me what I need to do to get e-sys working again?

Many thanks dude!

PM sent.

[P3dr0]

Hi Shawn,

Please could you assit with the latest S-Sys and PSdZData.

My VIN: 0B52295

Cheers
Pedro

[shawnsheridan]

Originally Posted by P3dr0

Hi Shawn,

Please could you assit with the latest S-Sys and PSdZData.

My VIN: 0B52295

Cheers
Pedro

PM sent.

[dom2497]

Hello Can you share with me Esys, psdzata and Launcher Pro for my UK LCI M2. Thanks

[shawnsheridan]

Originally Posted by dom2497

Hello Can you share with me Esys, psdzata and Launcher Pro for my UK LCI M2. Thanks

Your Receive PM function is disabled. PM me when working.

[Capnwillyp]

Hi Shawn,
My 2013 F25 was shipped with a CIC HU with the PDC (508A) and Surround View camera system (TRSVC). I recently swapped out the CIC for an NBT Evo HU and everything works as before, exceptÂ…

The PDC sounds work but nothing shows up on the screen when I go into reverse or press the PDC button. I have the TRSVC connected to the proper FBAS1 pins on the Evo HU and the PDC beeps work which leads me to believe that ECU is connected properly. (ISTA and E-Sys both show the TRSVC and PDC ECUs connected. The PDC appears to be integrated with the JBE box.)

Is there some HU coding I need? Is my PDC system Gen1 or Gen2? (It has 4 sensors on the front bumper and 4 sensors on the Rear bumper.)

(Thiis swap did not involve any sort of aftermarket adapter.)

[Capnwillyp]

Replying to my own post…

Figured it out!
Coded the Evo as follows:

MACRO_PMA_EINPARKEN to gen1 (was nicht_aktiv)
COMMUNICATION_PARKMASTER to gen1 (was gen2)
CAMERA_SYSTEM to trsvc (was icam_high)

Other relevant settings were OK (PDC_GENERATION = gen1, front and rear sensors set to 4 each, CAM_ECU = werte 01, MACRO_TV_C and MACRO_RV_C both = aktiv).

[shawnsheridan]

Originally Posted by Capnwillyp

Replying to my own post…

Figured it out!
Coded the Evo as follows:

MACRO_PMA_EINPARKEN to gen1 (was nicht_aktiv)
COMMUNICATION_PARKMASTER to gen1 (was gen2)
CAMERA_SYSTEM to trsvc (was icam_high)

Other relevant settings were OK (PDC_GENERATION = gen1, front and rear sensors set to 4 each, CAM_ECU = werte 01, MACRO_TV_C and MACRO_RV_C both = aktiv).

[Cambridge]

Are EST tokens required anymore if using BimmerUtility and E-Sys 3.40?

[shawnsheridan]

Originally Posted by Cambridge

Are EST tokens required anymore if using BimmerUtility and E-Sys 3.40?

No token needed.

[uadissa]

hey guys any chance sending a latest psdzdata lite link ? My i-step has been upgraded by dealer to S15a-22. Quite new. Current version I have ( 4.27.x) goes only upto i-step-15a-20-11