[sylky]

ok,thanks,work

[kguog]

Hey Shawn, I recently got a chassis error code on I-Drive and I think it might be due to my coilovers, even though they were installed a few months back. On Bimmerlink I got 4 codes : "Valve coil - (location such as front left) - online check valve error". After doing a lot of research the only thing I could think of was EDC, and my shop also found 4 EDC codes on ISTA. Could you please send me the new E-SYS so I can try to code the EDC completely out? Thank you, and if there is a forum with the instructions on how to code it out on a 2017 M240, that would be really useful too. Thanks for all the work you've been doing in these forums-Kevin.

[kguog]

Originally Posted by geofff87

Unless it needs to be 4 replies in a single forum (x3 vs m2), i should have hit that this morning. Maybe it's just slow?

Did you get the PM working?

[kguog]

Has anyone by any chance deleted the EDC on their M240? If so, what was the reason for doing so and how did you do it. I only found 1 other forum for M240's doing this and some people were asking what to unplug because it is different than in the M3/4 I think. Any guidance would be greatly appreciated, thank you for the help.

[shawnsheridan]

Originally Posted by kguog

Has anyone by any chance deleted the EDC on their M240? If so, what was the reason for doing so and how did you do it. I only found 1 other forum for M240's doing this and some people were asking what to unplug because it is different than in the M3/4 I think. Any guidance would be greatly appreciated, thank you for the help.

Your Receive PM function is disabled. PM me when working.

[kguog]

Also, does the laptop you are using have to have Windows 7 or older? A video I found from a few months ago said that E-SYS will not work if the laptop has newer than windows 7, was wondering if this is still true.

[kguog]

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

I'm trying to get it working, not sure why it won't. I have 14 posts made from a week or so ago, I'll try to post another I guess, do all 4 posts have to be in this exact forum?

[shawnsheridan]

Originally Posted by kguog

Also, does the laptop you are using have to have Windows 7 or older? A video I found from a few months ago said that E-SYS will not work if the laptop has newer than windows 7, was wondering if this is still true.

Not true. I use Win10 64 Bit.

[kguog]

Originally Posted by shawnsheridan

Not true. I use Win10 64 Bit.

That is good to know, thank you. Now I just have to wait for PM's to start working I guess.

[shawnsheridan]

Originally Posted by kguog

I'm trying to get it working, not sure why it won't. I have 14 posts made from a week or so ago, I'll try to post another I guess, do all 4 posts have to be in this exact forum?

Not that I know of.

[kguog]

Originally Posted by shawnsheridan

Not that I know of.

Can you maybe email it to me if possible? If not I can wait for PM to work.

[kguog]

Originally Posted by shawnsheridan

Not that I know of.

My PM function works now

[shawnsheridan]

Originally Posted by kguog

Can you maybe email it to me if possible? If not I can wait for PM to work.

Originally Posted by kguog

My PM function works now

PM sent.

[iliyanz1]

Hi, could you send me a PM as well please.

Thank you

[shawnsheridan]

Originally Posted by iliyanz1

Hi, could you send me a PM as well please.

Thank you

Your Receive PM function is disabled. PM me when working.

[Stefan1251]

Originally Posted by shawnsheridan

PM me your VIN (last 7).

And also the Donor EPS VIN if you know it.

Are there FSC for NBT and higher already, came back to coding after a year or two?

And would you rather go full PSdZdata or lite?

[shawnsheridan]

Originally Posted by Stefan1251

Are there FSC for NBT and higher already, came back to coding after a year or two?

And would you rather go full PSdZdata or lite?

Yes, not all leave factory with 3-Year FSC Code.

You need Full PSdZData only if you are programming (flashing) ECU, else Lite is all you need.

[suky]

Originally Posted by chknlytle

Has anyone come across a fault code B7F87F "CIC: coding data implausible" and/or B7F8AA "CIC: coding data not released"? I tried coding CIC_HU but keep getting stuck because it says there's no data to code.

I seen an option to reset the head unit but worried it might brick. Can anyone give advice on what to do?

Hi did you ever get to sort this out i have the same error messages and have tried to update the CIC Nav Maps and theNAV is not working correctly. It doesnt show roads or all postcodes. When your travelling no roads are shown just like a blank screen a bit like your in the open....
Anyone able to help here... thanks

[lknbimmers]

Hi Shawn

is there an update to psdzdata lite for software version 11/2021.50?

Thank you.

[shawnsheridan]

Originally Posted by lknbimmers

Hi Shawn

is there an update to psdzdata lite for software version 11/2021.50?

Thank you.

PM sent.

[bycomputers]

Want to learn how to change vin on BMW and flash the unit id4 to id6
Who want to teach me and how much do you charge.
Thanks

[ckspark]

Hi shawnsheridan,

Can you send me the latest e-sys and pszdata Please for my I01.
Thank you.