Coding made Easy: A step by step procedure

kkratofi · 02-16-2022, 11:40 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thank you

lknbimmers · 02-17-2022, 05:47 PM

@Shawnsheridan
I'm looking to disable the parking lights and enable VIM on the G05 X5 using Launcher Pro.
Which module do I need to modify, can you please point me in the right direction.

Thanks as always!

shawnsheridan · 02-17-2022, 06:28 PM

Quote:

Originally Posted by lknbimmers

@Shawnsheridan
I'm looking to disable the parking lights and enable VIM on the G05 X5 using Launcher Pro.
Which module do I need to modify, can you please point me in the right direction.

Thanks as always!

PM sent.

david_r13 · 02-20-2022, 05:19 PM

Hi Shawn
Can you send me the latest E-Sys and the psdzdata for my 2014 328i F30?

Thank you!

shawnsheridan · 02-20-2022, 06:56 PM

Quote:

Originally Posted by david_r13

Hi Shawn
Can you send me the latest E-Sys and the psdzdata for my 2014 328i F30?

Thank you!

Your Receive PM function is disabled. PM me when working.

JimboMoss77 · 02-22-2022, 02:38 PM

Hi shawnsheridan please could you send the latest E-Sys and the psdzdata across for my BMW F20/21 please, thanks in advance

shawnsheridan · 02-22-2022, 02:45 PM

Quote:

Originally Posted by JimboMoss77

Hi shawnsheridan please could you send the latest E-Sys and the psdzdata across for my BMW F20/21 please, thanks in advance

PM sent.

JimboMoss77 · 02-22-2022, 02:50 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

All received, thank you very much

kylix · 02-23-2022, 08:19 AM

Hi everyone,
I just purchased ‘13 F25 few weeks ago. One of the annoying things is auto start-stop. I’ve been reading this thread that i could turn it off. Ive already ordered the cable. Would like to get esys and etc to start coding?
Thank you in advance!

shawnsheridan · 02-23-2022, 08:42 AM

Quote:

Originally Posted by kylix

Hi everyone,
I just purchased ‘13 F25 few weeks ago. One of the annoying things is auto start-stop. I’ve been reading this thread that i could turn it off. Ive already ordered the cable. Would like to get esys and etc to start coding?
Thank you in advance!

Your Receive PM function is disabled. PM me when working.

Ramer21 · 02-23-2022, 11:25 AM

Hi Shawn

Can you send me the latest E-Sys and the psdzdata for my 2013 328i F30? Does it make a difference if I updated to an NBT EVO ID6?

Thank you!

shawnsheridan · 02-23-2022, 11:34 AM

Quote:

Originally Posted by Ramer21

Hi Shawn

Can you send me the latest E-Sys and the psdzdata for my 2013 328i F30? Does it make a difference if I updated to an NBT EVO ID6?

Thank you!

Not matter. PM sent.

kylix · 02-23-2022, 08:52 PM

Quote:

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

Ok, will do. thanks for your response!

lknbimmers · 03-05-2022, 04:07 PM

@ shawnsheridan
Last piece of the coding puzzle, enable anti dazzle.
Am I understanding correctly that only EsysX can handle the FDL coding required.
Please send the latest E-Sys and the psdzdata for the G05 X5.

Thank you!

shawnsheridan · 03-05-2022, 04:09 PM

Quote:

Originally Posted by lknbimmers

@ shawnsheridan
Last piece of the coding puzzle, enable anti dazzle.
Am I understanding correctly that only EsysX can handle the FDL coding required.
Please send the latest E-Sys and the psdzdata for the G05 X5.

Thank you!

PM sent.

okayr · 03-08-2022, 01:26 PM

I retrofitted the F25 LCI climate control panel to my 2014 and it works 100% without issue. However when I open Bimmercode it says the coding data is invalid and should be restored from a backup. But it doesn't load any previous backups when I click that.. So I tried E-Sys and the CAFD file for IHKA is missing. So I tried these steps:

Quote:

Originally Posted by shawnsheridan

It would be as follows:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

Except when I get to Left-Click desired ECU detect CAF for SWE is greyed out. What am I missing? Is my PSZData too old?
I did just get 2021-11 i-Level update. The new to me climate panel is from a 2016.

shawnsheridan · 03-08-2022, 01:29 PM

Quote:

Originally Posted by okayzac

I retrofitted the F25 LCI climate control panel to my 2014 and it works 100% without issue. However when I open Bimmercode it says the coding data is invalid and should be restored from a backup. But it doesn't load any previous backups when I click that.. So I tried E-Sys and the CAFD file for IHKA is missing. So I tried these steps:

Except when I get to Left-Click desired ECU detect CAF for SWE is greyed out. What am I missing? Is my PSZData too old?
I did just get 2021-11 i-Level update. The new to me climate panel is from a 2016.

Need Esys 3.30.1 or higher.

okayr · 03-08-2022, 01:30 PM

Quote:

Originally Posted by shawnsheridan

Need Esys 3.30.1 or higher.

Could you send me latest esys and pszdata?
Thank you!!

shawnsheridan · 03-08-2022, 02:07 PM

Quote:

Originally Posted by okayzac

Could you send me latest esys and pszdata?
Thank you!!

PM sent.

kondziorek · 03-08-2022, 07:45 PM

Hey Shawn,
could you send me the latest esys and pszdata?
Thank you in advance!

shawnsheridan · 03-09-2022, 03:40 AM

Quote:

Originally Posted by kondziorek

Hey Shawn,
could you send me the latest esys and pszdata?
Thank you in advance!

PM sent.

fkperformance · 03-18-2022, 04:40 AM

shawnsheridan Hi Shawn, could I please get a link for E-sys and pszdata? I have a 2014 F25 X3. Thank you!

02-17-2022, 05:47 PM	#3368
lknbimmers Lieutenant 89 Rep 440 Posts Drives: E90/G05 Join Date: Jan 2006 Location: NYC iTrader: (3)	Coding requests @Shawnsheridan I'm looking to disable the parking lights and enable VIM on the G05 X5 using Launcher Pro. Which module do I need to modify, can you please point me in the right direction. Thanks as always!
	Appreciate 0 Quote

02-20-2022, 05:19 PM	#3370
david_r13 david_r13 0 Rep 5 Posts Drives: BMW 328i 14' Join Date: Feb 2022 Location: Florida iTrader: (0)	Hi Shawn Can you send me the latest E-Sys and the psdzdata for my 2014 328i F30? Thank you!
	Appreciate 0 Quote

02-22-2022, 02:38 PM	#3372
JimboMoss77 New Member 1 Rep 21 Posts Drives: M135i Join Date: Nov 2021 Location: UK iTrader: (0)	Hi shawnsheridan please could you send the latest E-Sys and the psdzdata across for my BMW F20/21 please, thanks in advance
	Appreciate 0 Quote

02-23-2022, 08:19 AM	#3375
kylix New Member 0 Rep 5 Posts Drives: X3 Join Date: Feb 2022 Location: EastCoast iTrader: (0)	Hi everyone, I just purchased ‘13 F25 few weeks ago. One of the annoying things is auto start-stop. I’ve been reading this thread that i could turn it off. Ive already ordered the cable. Would like to get esys and etc to start coding? Thank you in advance!
	Appreciate 0 Quote

02-23-2022, 11:25 AM	#3377
Ramer21 New Member 0 Rep 6 Posts Drives: F30 328i M-Sport Join Date: Dec 2021 Location: Los Angeles iTrader: (0)	Hi Shawn Can you send me the latest E-Sys and the psdzdata for my 2013 328i F30? Does it make a difference if I updated to an NBT EVO ID6? Thank you!
	Appreciate 0 Quote

03-05-2022, 04:07 PM	#3380
lknbimmers Lieutenant 89 Rep 440 Posts Drives: E90/G05 Join Date: Jan 2006 Location: NYC iTrader: (3)	Enable Anti Dazzle @ shawnsheridan Last piece of the coding puzzle, enable anti dazzle. Am I understanding correctly that only EsysX can handle the FDL coding required. Please send the latest E-Sys and the psdzdata for the G05 X5. Thank you!
	Appreciate 0 Quote

03-08-2022, 07:45 PM	#3386
kondziorek New Member 0 Rep 14 Posts Drives: BMW X3 Join Date: May 2021 Location: United States iTrader: (0)	Hey Shawn, could you send me the latest esys and pszdata? Thank you in advance!
	Appreciate 0 Quote

03-18-2022, 04:40 AM	#3388
fkperformance New Member 3 Rep 14 Posts Drives: F25 X3, e46 330ci Join Date: Feb 2022 Location: Australia iTrader: (0)	shawnsheridan Hi Shawn, could I please get a link for E-sys and pszdata? I have a 2014 F25 X3. Thank you!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search