Bimmercode coding on G01 - Share you coding changes

gugin · 10-20-2019, 11:58 AM

Maybe set reverse_gong to off (Werte=00)?

HU_NBT2 | 3002 AUDIO_TUNER_TRAFFIC | REVERSE_GONG | off [00]

The comment for that options says "Kommentar=controls, if ReverseGong is activated."

LimiX4m40 · 10-20-2019, 12:07 PM

Quote:

Originally Posted by gugin

Maybe set reverse_gong to off (Werte=00)?

HU_NBT2 | 3002 AUDIO_TUNER_TRAFFIC | REVERSE_GONG | off [00]

The comment for that options says "Kommentar=controls, if ReverseGong is activated."

I think that gong is just if you put into reverse, but the sound of the „cameras" if your near to a wall that horrible piiiiip puuupp poooooo

nyalpine90 · 10-20-2019, 02:02 PM

Can the angel eyes be coded to be brighter?

gugin · 10-21-2019, 06:08 PM

Quote:

Originally Posted by LimiX4m40

I think that gong is just if you put into reverse, but the sound of the „cameras" if your near to a wall that horrible piiiiip puuupp poooooo

I see--I misunderstood your question. Ignore what I said. I don't know if the volume of the sound of the proximity sensors can be changed.

gugin · 10-21-2019, 06:33 PM

Quote:

Originally Posted by nyalpine90

Can the angel eyes be coded to be brighter?

I don't believe it's possible. Their intensity is already coded at 100% from the factory. Angel eyes are controlled by DRL_Idx. The Werte for that parameter is [02 02 02 02 02 02 02 02 11 12 02 02], with the red numbers indicating the index governing the behavior of the daytime running lights. 11 and 12 in hex translate to 17 and 18 in decimal. Looking at LmmIdx17_Intensity and LmmIdx18_Intensity, the Werte for each of them is [64] hex, which is 100 in decimal. I guess you could try changing the Werte to be more than a 100 (kind of oveclocking the lights), but I would not do that on my car.

JB M40i · 10-23-2019, 09:35 AM

I'm sure this has been asked and answered a few times in this thread, so apologies in advance but I can't find any definitive answers... Is VLD code-able on the G01 with BimmerCode?

fsugatorbait · 10-23-2019, 09:43 AM

Quote:

Originally Posted by JB M40i

I'm sure this has been asked and answered a few times in this thread, so apologies in advance but I can't find any definitive answers... Is VLD code-able on the G01 with BimmerCode?

Yes, I was able to do it in Expert mode.

Going off memory it was in BDC > Expert Mode > Laminster1 > ForwardlightY > and then you can make the selection to turn it on.

I know some of the labels are off, can't remember exactly what they were called, but this will get you in the ballpark.

gugin · 10-23-2019, 09:02 PM

Yes, you can do it in BimmerCode's expert mode. Go to BDC_BODY2, branch 3530 LaMaster1, and code

Code:

C_AFS_ENA = G001_enable (Werte=01)
LUT_FLC_FORWARDLIGHTING_Y = G001_AFS (Werte=00,00,00)

Please note that this enables Variable Light Distribution, which is different from Non-Glare High Beams. Variable Light Distribution changes the shape of the low beams.

GoodGuyAvi · 10-23-2019, 09:06 PM

Quote:

Originally Posted by gugin

Maybe set reverse_gong to off (Werte=00)?

HU_NBT2 | 3002 AUDIO_TUNER_TRAFFIC | REVERSE_GONG | off [00]

The comment for that options says "Kommentar=controls, if ReverseGong is activated."

Gugin is there anyway to remove startup driver profile welcome picture. I know in some cars is a option in idrive but in G series they hide it.
I tried everything including disabling profiles but no luck whatever i do.

LimiX4m40 · 10-24-2019, 04:08 PM

Quote:

Originally Posted by gugin

Quote:

Originally Posted by LimiX4m40

I think that gong is just if you put into reverse, but the sound of the „cameras" if your near to a wall that horrible piiiiip puuupp poooooo

I see--I misunderstood your question. Ignore what I said. I don't know if the volume of the sound of the proximity sensors can be changed.

No problem

Hmmm thats really to loud

bvaidu1 · 10-24-2019, 08:29 PM

Has anybody received updates for 2020 iDrive 7.0 coding? I am still waiting to get an updated version. So far my $32 purchase is a waste!

suby01 · 10-24-2019, 10:02 PM

Quote:

Originally Posted by bvaidu1

Has anybody received updates for 2020 iDrive 7.0 coding? I am still waiting to get an updated version. So far my $32 purchase is a waste!

There is a separate forum thread for the 2020 updates. And the current news that an update is coming very soon.

gugin · 10-24-2019, 11:36 PM

Quote:

Originally Posted by AvetNY

Gugin is there anyway to remove startup driver profile welcome picture. I know in some cars is a option in idrive but in G series they hide it.
I tried everything including disabling profiles but no luck whatever i do.

I'll take a look through the coding files. Most likely will get to this on the weekend. Where did you disable the profiles? In HU NBT Evo or some other module?

Which cars have the option? I could try to emulate that car to see what the FDLs for that car look like.

stammix · 10-25-2019, 12:08 PM

Did somebody turn on the DRL rear lights of G01?

djrobx · 10-26-2019, 11:05 AM

Disable seatbelt slack tug when you start driving:

ACSM5 \ CAFD_00001B2C

cpGleTr1LEnb: nicht_aktiv [00] (Driver)
cpGleTr1REnb: nicht_aktiv [00] (Passenger)

(DISCLAIMER: Disable this safety feature at your own risk. For me it was intolerable - it would tighten and not fully release, inhibiting my ability see in parking lots. Dealer would not acknowledge issue.)

Alias1431 · 10-27-2019, 12:09 AM

I love that feature! It's like it's hugging me. 🥰

Juris · 10-27-2019, 04:27 PM

Can the "Hey BMW" Intelligent Personal Assistant be coded or added in via hardware?

djrobx · 10-27-2019, 04:59 PM

Quote:

Originally Posted by Alias1431

I love that feature! It's like it's hugging me. 🥰

Mine gives a very awkward hug that doesn't let go.

b.guggenmos · 10-27-2019, 09:21 PM

Quote:

Originally Posted by djrobx

Mine gives a very awkward hug that doesn't let go.

Weird? Mine is just a quick tug to make sure you are against the seat back and after that I can lean as far forward as I want to go. The dealer should be able to fix that? You should also compare to another car? As much as I like to code things to my liking in my X3 the safety stuff I am leaving alone.

djrobx · 10-27-2019, 10:45 PM

If you like the behavior, don't use the code. As I wrote, I already asked my dealer. They stated it is operating as designed.

The option is in the dealer-codable aftermarket HO-worts, so it's something even BMW seems to think should be configurable to some extent.

I have been dealing with it for over a year and I cannot express how much more I like my car now that I don't have to fight against it 50% of the time when I drive away.

suby01 · 10-28-2019, 06:14 AM

Quote:

Originally Posted by djrobx

If you like the behavior, don't use the code. As I wrote, I already asked my dealer. They stated it is operating as designed.

The option is in the dealer-codable aftermarket HO-worts, so it's something even BMW seems to think should be configurable to some extent.

I have been dealing with it for over a year and I cannot express how much more I like my car now that I don't have to fight against it 50% of the time when I drive away.

Hurts my head as to why we cant turn this option off from the factory? This is the only feature that pisses me off about the X3.

X3M40iHODGY · 10-28-2019, 09:24 AM

17 quid for the adapter off ebay and 31 quid for the software - bargain. Used OBDeleven on my Golf R and BC is just as good....similar to Carista but still good to have a play with.

I currently have Alpina dials and M startup on iD screen. Also small digital speed readout in all modes of adaptive and Switched of ASD

10-20-2019, 11:58 AM	#1893
gugin New member 318 Rep 553 Posts Drives: 2019 X3 M40i Join Date: Jan 2019 Location: Washington, DC iTrader: (0)	Maybe set reverse_gong to off (Werte=00)? HU_NBT2 \| 3002 AUDIO_TUNER_TRAFFIC \| REVERSE_GONG \| off [00] The comment for that options says "Kommentar=controls, if ReverseGong is activated."
	Appreciate 0 Quote

10-20-2019, 02:02 PM	#1895
nyalpine90 Lieutenant General 7433 Rep 11,843 Posts Drives: MY24 G01 AW Msport Join Date: Feb 2008 Location: L.I. NY iTrader: (4) Garage List 2016 BMW X4 [9.33]	Can the angel eyes be coded to be brighter?
	Appreciate 0 Quote

10-23-2019, 09:35 AM	#1898
JB M40i Enlisted Member 24 Rep 49 Posts Drives: 2019 X3 M40i Join Date: Jun 2019 Location: N.Virginia iTrader: (1)	I'm sure this has been asked and answered a few times in this thread, so apologies in advance but I can't find any definitive answers... Is VLD code-able on the G01 with BimmerCode?
	Appreciate 0 Quote

10-23-2019, 09:02 PM	#1900
gugin New member 318 Rep 553 Posts Drives: 2019 X3 M40i Join Date: Jan 2019 Location: Washington, DC iTrader: (0)	Yes, you can do it in BimmerCode's expert mode. Go to BDC_BODY2, branch 3530 LaMaster1, and code Code: C_AFS_ENA = G001_enable (Werte=01) LUT_FLC_FORWARDLIGHTING_Y = G001_AFS (Werte=00,00,00) Please note that this enables Variable Light Distribution, which is different from Non-Glare High Beams. Variable Light Distribution changes the shape of the low beams.
	Appreciate 1 JB M40i24.00 Quote

10-24-2019, 08:29 PM	#1903
bvaidu1 New Member 0 Rep 11 Posts Drives: BMW X3 2020 Join Date: Oct 2019 Location: Los Angeles, CA iTrader: (0)	Has anybody received updates for 2020 iDrive 7.0 coding? I am still waiting to get an updated version. So far my $32 purchase is a waste!
	Appreciate 0 Quote

10-25-2019, 12:08 PM	#1906
stammix Enlisted Member 6 Rep 30 Posts Drives: BMW G01 Join Date: Oct 2019 Location: Romania iTrader: (0)	Did somebody turn on the DRL rear lights of G01?
	Appreciate 0 Quote

10-26-2019, 11:05 AM	#1907
djrobx Private First Class 57 Rep 191 Posts Drives: 2019 X4 m40i Flamenco Red Join Date: May 2015 Location: Valencia, CA iTrader: (0)	Disable seatbelt slack tug when you start driving: ACSM5 \ CAFD_00001B2C cpGleTr1LEnb: nicht_aktiv [00] (Driver) cpGleTr1REnb: nicht_aktiv [00] (Passenger) (DISCLAIMER: Disable this safety feature at your own risk. For me it was intolerable - it would tighten and not fully release, inhibiting my ability see in parking lots. Dealer would not acknowledge issue.)
	Appreciate 0 Quote

10-27-2019, 12:09 AM	#1908
Alias1431 Lieutenant Colonel 795 Rep 1,959 Posts Drives: 2019 BMW X3 M40i Join Date: May 2019 Location: Washington iTrader: (0)	I love that feature! It's like it's hugging me. 🥰
	Appreciate 4 chicagofan0019143.00 kevinkay271.50 cipher5506.00 admranger2984.50 Quote

10-27-2019, 04:27 PM	#1909
Juris Private First Class 41 Rep 155 Posts Drives: X-3 M40i Alpine White 2019 Join Date: Aug 2019 Location: Pikes Peak iTrader: (0)	Can the "Hey BMW" Intelligent Personal Assistant be coded or added in via hardware?
	Appreciate 0 Quote

10-27-2019, 10:45 PM	#1912
djrobx Private First Class 57 Rep 191 Posts Drives: 2019 X4 m40i Flamenco Red Join Date: May 2015 Location: Valencia, CA iTrader: (0)	If you like the behavior, don't use the code. As I wrote, I already asked my dealer. They stated it is operating as designed. The option is in the dealer-codable aftermarket HO-worts, so it's something even BMW seems to think should be configurable to some extent. I have been dealing with it for over a year and I cannot express how much more I like my car now that I don't have to fight against it 50% of the time when I drive away. Last edited by djrobx; 10-27-2019 at 10:53 PM..
	Appreciate 0 Quote

10-28-2019, 09:24 AM	#1914
X3M40iHODGY New Member 9 Rep 18 Posts Drives: BMW X3 M40i Join Date: Aug 2019 Location: Reading UK iTrader: (0)	17 quid for the adapter off ebay and 31 quid for the software - bargain. Used OBDeleven on my Golf R and BC is just as good....similar to Carista but still good to have a play with. I currently have Alpina dials and M startup on iD screen. Also small digital speed readout in all modes of adaptive and Switched of ASD
	Appreciate 0 Quote