11-04-2020, 03:52 PM | #1 |
Lieutenant
269
Rep 595
Posts
Drives: 2012 F25 (N55), 2014 I01 (REX)
Join Date: Oct 2010
Location: San Diego / Menifee
|
DIY: Let's Replace Our Interior Door Pull Handle, Front Right
Okay we're back again for another DIY!
Interior Door Pull Handle (front/passenger side) getting sticky? I got us covered fam! I believe the PN is 51419209216. Some places name the part "Support, pull strap, right", some places name it "Interior Door Pull Handle, Front Right" Affordable replacement found on amazon/ebay Here are the steps I performed: Our sticky culprit Pry off speaker grille Remove screw behind Pry leather cover Remove 2 screws behind the leather cover Remove 2 screws at the bottom of door panel Pry door panel from all sides, go slow and "Feel" for what needs to be pry'd These are the little clips you're prying Slide door lock out of its hole * * * to be continued * * * |
11-04-2020, 03:54 PM | #2 |
Lieutenant
269
Rep 595
Posts
Drives: 2012 F25 (N55), 2014 I01 (REX)
Join Date: Oct 2010
Location: San Diego / Menifee
|
The back of door panel should look like this
The handle is held on by 2 screws, remove them both I used a flat head to push in the tabs, then pushed away from me to release it At this point, you can pull it out Side by side comparo Install in reverse order, simple enough PROFIT |
Appreciate
1
Wgosma806.00 |
10-31-2021, 02:48 PM | #3 |
Private First Class
72
Rep 183
Posts |
Oh my goodness this is excellent! I have that problem on the driver-side, this gives me hope to find the part.
Edit: Found it: https://x3.xbimmers.com/forums/showt...de+door+handle Last edited by OldenburgerM3; 10-31-2021 at 03:07 PM.. |
Appreciate
1
evilchargerfan269.00 |
Post Reply |
Bookmarks |
|
|